FreedomPop USB Dongle

1 post
by NFAZ10 » Sat Aug 17, 2013 1:53 am
Hello all,
I need some help. I got my FreedomPop 4G USB dongle to work fine by doing the following....

sudo dhclient eth1

this switched the network device being used....the problem is that it resets and this needs to be done on every can I change this and make this happen on boot....maybe say if eth0 is not available then use eth1..

HELP Thank you
Posts: 2
Joined: Sat Aug 17, 2013 1:38 am