chaicoffee_08
Posts: 1
Joined: Sun May 31, 2015 11:29 am

Re: D.Link DWA 131 WLAN/USB Adapter not working

Sun May 31, 2015 11:31 am

hey Mr. Engman

kudos and thanks a lot! i just got a new dongle and it's finally working now.

running 3.18.14.-v7

cheers! more power to you :)

jackm
Posts: 1
Joined: Wed Jun 10, 2015 2:04 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Wed Jun 10, 2015 2:07 pm

Thanks for instructions as on 30 Mar. Worked like a charm! Hope drivers get included soon.

waxcomb
Posts: 1
Joined: Mon Jul 27, 2015 10:37 am

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Jul 27, 2015 10:39 am

Thank you EngMan!!!!

Martin7637
Posts: 4
Joined: Mon Jul 27, 2015 6:02 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Jul 27, 2015 7:35 pm

Hi. I tried to my D link dwa131E1 work but successless.

Code: Select all

~ $ uname -a
Linux raspberrypi 3.18.11+ #781 PREEMPT Tue Apr 21 18:02:18 BST 2015 armv6l GNU/Linux
I write:

Code: Select all

~ $ wget https://dl.dropboxusercontent.com/u/80256631/8192eu-3.18.11-781.tar.gz
~ $ tar -xzf 8192eu-3.18.11-781.tar.gz
~ $ sudo install -p -m 644 8192eu.ko /lib/modules/3.18.7+/kernel/drivers/net/wireless
and obtain:
install: impossible de créer le fichier standard « /lib/modules/3.18.7+/kernel/drivers/net/wireless »: Aucun fichier ou dossier de ce type
And with:

Code: Select all

 ~ $ ./install.sh
sudo cp 8192eu.conf /etc/modprobe.d/.
sudo install -p -m 644 8192eu.ko /lib/modules/3.18.11+/kernel/drivers/net/wirele ss
install: impossible de créer le fichier standard « /lib/modules/3.18.11+/kernel/ drivers/net/wireless »: Aucun fichier ou dossier de ce type
sudo depmod 3.18.11+
ERROR: could not open directory /lib/modules/3.18.11+: No such file or directory
FATAL: could not search modules: No such file or directory

Reboot to run the driver.

If you have already configured your wifi it should start up and connect to your
wireless network.

If you have not configured your wifi you will need to do that to enable the wifi .
Please need help

(sorry for the english, I'm french)

User avatar
redhenk
Posts: 41
Joined: Wed Feb 20, 2013 9:35 am
Location: Naaldwijk, The Netherlands

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Jul 27, 2015 9:23 pm

What is the result of uname -a in a terminal?
Pi B, Pi 2B, Pi zero, Pi 3B

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Jul 27, 2015 9:45 pm

Hi Martin763,

You say command uname -a shows 3.18.11+ #781, but the ./install.sh command says the install directory /lib/modules/3.18.11+/kernel/drivers/net/wireless using 3.18.11+ does not exist. Have you made any changes or deleted any directories?

Reboot your Pi then run command uname -a again and post the output.

What does the command ls -l /lib/modules show?


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Martin7637
Posts: 4
Joined: Mon Jul 27, 2015 6:02 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Wed Jul 29, 2015 5:09 am

Hi MrE :),

thank you for your quick answer.

Hum..
Linux raspberrypi 3.18.14+ #2 PREEMPT Thu May 28 18:09:28 UTC 2015 armv6l GNU/Linux
total 8
drwxr-xr-x 3 root root 4096 juil. 27 17:32 3.18.14+
drwxr-xr-x 3 root root 4096 juil. 27 17:32 3.18.14-v7+
Strange... So I tried to download from your dropbox but I think it don't exist yet.

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Wed Jul 29, 2015 6:12 am

Martin7637 wrote:Hi MrE :),

thank you for your quick answer.

Hum..
Linux raspberrypi 3.18.14+ #2 PREEMPT Thu May 28 18:09:28 UTC 2015 armv6l GNU/Linux
Hi,

What OS are you running? The drivers I compile are for raspbian but the output from uname -a would indicate your kernel is not raspbian.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Martin7637
Posts: 4
Joined: Mon Jul 27, 2015 6:02 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Wed Jul 29, 2015 6:19 pm

Yes it's raspbian from NOOBS.

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Thu Jul 30, 2015 12:08 am

Martin7637 wrote:Yes it's raspbian from NOOBS.
Not exactly as far as I can tell. You may have installed raspbian using NOOBS but it has been updated and actually appears to be the Adafruit version which is not the same as the standard raspbian image.

However, you may be lucky as I have compiled some drivers for the Adafruit 3.18.14 versions, the 8192eu driver among them.

You can try this

Code: Select all

wget https://dl.dropboxusercontent.com/u/80256631/Ada-8192eu-3.18.14.tar.gz
tar xzf Ada-8192eu-3.18.14.tar.gz
./install.sh
After installing reboot and configure your wifi. I have configured mine by editing the file /etc/wpa_supplicant/wpa_supplicant.conf. Like

Code: Select all

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
        ssid="network-name"
        psk="network-password"
}

NOTE: I have had a problem loading wifi drivers with the Adafruit images due to a problem with a module that is included but, for some really obscure reason, does not appear to be compatible with the image and appears to stop the TFT screens from working. After installing the wifi driver reboot and if the TFT screen stops working move the files, fb_sys_fops.ko, to a different directory using the commands

Code: Select all

cd
sudo mv /lib/modules/3.18.14+/kernel/drivers/video/fbdev/core/fb_sys_fops.ko ./fb_sys_fops.ko.b1
sudo mv /lib/modules/3.18.14-v7+/kernel/drivers/video/fbdev/core/fb_sys_fops.ko ./fb_sys_fops.ko.b2
and then reboot again. These commands will save the file for the Pi B,B+ as fb_sys_fops.ko.b1 and the file for the Pi 2B as fb_sys_fops.ko.b2 in your home directory in case you need to recover them for any reason



MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Martin7637
Posts: 4
Joined: Mon Jul 27, 2015 6:02 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Thu Jul 30, 2015 5:02 am

Thank you I will try this soon. To well understand, it means that everytime I will update my pi, the dongle wifi will not work?

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Thu Jul 30, 2015 7:34 am

Martin7637 wrote:Thank you I will try this soon. To well understand, it means that everytime I will update my pi, the dongle wifi will not work?
Yes, you will need to download a new driver, if there is one.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

jfredsilva
Posts: 1
Joined: Sat Aug 01, 2015 12:58 am

Re: D.Link DWA 131 WLAN/USB Adapter not working

Sat Aug 01, 2015 1:04 am

I'm trying to install this adapter on a Xbian.
uname-a give me

Code: Select all

Linux xbian 4.1.2+ #14 PREEMPT Tue Jul 21 23:18:05 CEST 2015 armv6l GNU/Linux
So I write

Code: Select all

wget https://dl.dropboxusercontent.com/u/80256631/8192eu-4.1.2-14.tar.gz
The response is

Code: Select all

ERROR 404: Not Found.
What am I doing wrong?

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Sat Aug 01, 2015 8:56 am

jfredsilva wrote:I'm trying to install this adapter on a Xbian.
uname-a give me

Code: Select all

Linux xbian 4.1.2+ #14 PREEMPT Tue Jul 21 23:18:05 CEST 2015 armv6l GNU/Linux
So I write

Code: Select all

wget https://dl.dropboxusercontent.com/u/80256631/8192eu-4.1.2-14.tar.gz
The response is

Code: Select all

ERROR 404: Not Found.
What am I doing wrong?
Sorry, but I don't have drivers for Xbian.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

oneinsect
Posts: 8
Joined: Sun Aug 02, 2015 7:52 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Sun Aug 02, 2015 8:26 pm

Code: Select all

https://dl.dropboxusercontent.com/u/80256631/8192eu-4.0.9-v7-807.tar.gz
Must thank MrEngman for the above. :D

sealy_au
Posts: 5
Joined: Fri Aug 07, 2015 2:05 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Fri Aug 07, 2015 2:10 pm

Hi guys,
having the same issuses with this adaptor its a dwa-131 rev e
uname -a
Linux raspmedia 4.1.4-v7+ #808 SMP PREEMPT Thu Aug 6 16:59:39 BST 2015 armv7l GNU/Linux

dmesg
[ 3.925196] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[ 4.037345] usb 1-1.4: New USB device found, idVendor=2001, idProduct=3319
[ 4.053869] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.070685] usb 1-1.4: Product: Wireless N Nano USB Adapter
[ 4.087926] usb 1-1.4: SerialNumber: 00e04c000001

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Fri Aug 07, 2015 3:59 pm

sealy_au wrote:Hi guys,
having the same issuses with this adaptor its a dwa-131 rev e
uname -a
Linux raspmedia 4.1.4-v7+ #808 SMP PREEMPT Thu Aug 6 16:59:39 BST 2015 armv7l GNU/Linux

dmesg
[ 3.925196] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[ 4.037345] usb 1-1.4: New USB device found, idVendor=2001, idProduct=3319
[ 4.053869] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.070685] usb 1-1.4: Product: Wireless N Nano USB Adapter
[ 4.087926] usb 1-1.4: SerialNumber: 00e04c000001
Try this to download and install the driver

Code: Select all

wget https://dl.dropboxusercontent.com/u/80256631/8192eu-4.1.4-v7-808.tar.gz
tar xzf 8192eu-4.1.4-v7-808.tar.gz
./install.sh
After installing the driver reboot and then you will need to configure your wifi to connect to your network.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Untoldtruth
Posts: 1
Joined: Tue Aug 11, 2015 12:37 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Tue Aug 11, 2015 12:44 pm

Hey Mr Eggman.
I'm trying to get a hold of your drivers for the DWA-131 E1 and i'm running into 404 errors. is there any alternative way i could download them?

much appreciated.

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Wed Aug 12, 2015 7:25 am

Untoldtruth wrote:Hey Mr Eggman.
I'm trying to get a hold of your drivers for the DWA-131 E1 and i'm running into 404 errors. is there any alternative way i could download them?

much appreciated.
The download from dropbox is OK for me but you could try this instead

Code: Select all

wget http://www.fars-robotics.net/8192eu-4.1.4-v7-808.tar.gz
tar xzf 8192eu-4.1.4-v7-808.tar.gz
./install.sh

MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Librentez
Posts: 2
Joined: Sun Aug 16, 2015 12:06 pm

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Aug 17, 2015 3:23 pm

MrEngman,

Your compiled driver is working on my Pi, but I'm not able to compile and I would like to understand why.

- Can you give us the source that you use to compile ?
- Which version of GCC are you using ?

My Kernel (Minibian) :

Code: Select all

Linux raspberrypi 3.18.7+ #755 PREEMPT Thu Feb 12 17:14:31 GMT 2015 armv6l GNU/Linux
What I do :

Code: Select all

mkdir src
cd src

FIRMWARE_HASH=$(zgrep "* firmware as of" /usr/share/doc/raspberrypi-bootloader/changelog.Debian.gz | head -1 | awk '{ print $5 }')
KERNEL_HASH=$(wget https://raw.github.com/raspberrypi/firmware/$FIRMWARE_HASH/extra/git_hash -O -)

wget https://github.com/raspberrypi/linux/archive/$KERNEL_HASH.tar.gz
tar -xvzf $KERNEL_HASH.tar.gz
mv linux-$KERNEL_HASH/ linux/

ln -s /root/src/linux/ /lib/modules/$(uname -r)/build
ln -s /root/src/linux/arch/arm /root/src/linux/arch/armv6l 

cd linux/
make mrproper
make bcmrpi_defconfig
make modules_prepare
wget https://raw.githubusercontent.com/raspberrypi/firmware/8aca5762f984f6decbeda294cee8418966c3d8d3/extra/Module.symvers
Everything go smooth !

So far I tested 2 drivers :

- rtl8192EU_linux_v4.2.2_7585.20130524 :
- Compile : [Error]

- rtl8192EU_linux_v4.3.1.1_11320.20140505
- Compile : [Ok]
- Loading : Crash

rtl8192EU_linux_v4.2.2_7585.20130524 compilation error :

Code: Select all

CC [M]  /root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.o
/root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.c: In function ‘rtw_proc_init_one’:
/root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.c:355:3: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration]
create_proc_entry is deprecated since 3.10 I think, any idea ? My idea is that i don't have the right driver source :).

Thanks !

Ronan

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Mon Aug 17, 2015 6:12 pm

Librentez wrote:MrEngman,

Your compiled driver is working on my Pi, but I'm not able to compile and I would like to understand why.

- Can you give us the source that you use to compile ?
- Which version of GCC are you using ?

My Kernel (Minibian) :

Code: Select all

Linux raspberrypi 3.18.7+ #755 PREEMPT Thu Feb 12 17:14:31 GMT 2015 armv6l GNU/Linux
What I do :

Code: Select all

mkdir src
cd src

FIRMWARE_HASH=$(zgrep "* firmware as of" /usr/share/doc/raspberrypi-bootloader/changelog.Debian.gz | head -1 | awk '{ print $5 }')
KERNEL_HASH=$(wget https://raw.github.com/raspberrypi/firmware/$FIRMWARE_HASH/extra/git_hash -O -)

wget https://github.com/raspberrypi/linux/archive/$KERNEL_HASH.tar.gz
tar -xvzf $KERNEL_HASH.tar.gz
mv linux-$KERNEL_HASH/ linux/

ln -s /root/src/linux/ /lib/modules/$(uname -r)/build
ln -s /root/src/linux/arch/arm /root/src/linux/arch/armv6l 

cd linux/
make mrproper
make bcmrpi_defconfig
make modules_prepare
wget https://raw.githubusercontent.com/raspberrypi/firmware/8aca5762f984f6decbeda294cee8418966c3d8d3/extra/Module.symvers
Everything go smooth !

So far I tested 2 drivers :

- rtl8192EU_linux_v4.2.2_7585.20130524 :
- Compile : [Error]

- rtl8192EU_linux_v4.3.1.1_11320.20140505
- Compile : [Ok]
- Loading : Crash

rtl8192EU_linux_v4.2.2_7585.20130524 compilation error :

Code: Select all

CC [M]  /root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.o
/root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.c: In function ‘rtw_proc_init_one’:
/root/src/rtl8192EU_linux_v4.2.2_7585.20130524/os_dep/linux/os_intfs.c:355:3: error: implicit declaration of function ‘create_proc_entry’ [-Werror=implicit-function-declaration]
create_proc_entry is deprecated since 3.10 I think, any idea ? My idea is that i don't have the right driver source :).

Thanks !

Ronan
I normally cross-compile my drivers on a PC running Ubuntu 14.0.2, however I have previously compiled on the RPi. Compiling on the Pi I found one of the drivers crashed the kernel when it booted which did not happen when I cross-compiled on the PC. I never worked out why the driver crashed. I have not seen the 8192eu driver causing any problems.

The 8192eu driver I use I got from here https://sites.google.com/site/easylinux ... /reserve-7. I believe it is an updated version of the Maxxter driver with patches to handle the error you see. It may also require an additional patch

Code: Select all

diff -Naur 8192eu/os_dep/linux/rtw_android.c rtl8192eus/os_dep/linux/rtw_android.c
--- 8192eu/os_dep/linux/rtw_android.c   2015-05-10 14:14:00.286604282 +0100
+++ rtl8192eus/os_dep/linux/rtw_android.c       2015-06-21 21:21:21.017365835 +0100
@@ -224,7 +224,7 @@
 {
        int cmd_num;
        for(cmd_num=0 ; cmd_num<ANDROID_WIFI_CMD_MAX; cmd_num++)
-               if(0 == strnicmp(cmdstr , android_wifi_cmd_str[cmd_num], strlen(android_wifi_cmd_str[cmd_num])) )
+               if(0 == strncasecmp(cmdstr , android_wifi_cmd_str[cmd_num], strlen(android_wifi_cmd_str[cmd_num])) )
                        break;

        return cmd_num;
Regarding gcc I believe ideally it should be compiled with the same compiler version used to compile the kernel. The compiler available as standard on the RPi is a rather older version, 4.6. On the Pi I have updated the compiler using this https://somewideopenspace.wordpress.com ... pi-wheezy/. It is possible to update to a gcc-4.8 version using apt-get but I think that compiler version is an older version of gcc-4.8 and has a problem.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

d4vidb
Posts: 4
Joined: Tue Aug 25, 2015 11:53 am

Re: D.Link DWA 131 WLAN/USB Adapter not working

Tue Aug 25, 2015 12:04 pm

MrEngman wrote:
puddle wrote:hello
i also have the e1 version i'm trying to use with my pi2 b+. I rolled back from 3.18.10-v7+ to use mr engmans driver but the links are expired. anyone willing to provide a working driver with our device id or possibly a little guide on how to modify/compile it ourselves so to be able to update freely until it is included?
There is a linux driver for this model on the Australian website http://support.dlink.com.au/Download/do ... pe=Drivers
I've tried to install it but it fails on the "make"command. Any advice would be appreciated.
tia
I have drivers available for all 3.18 versions of raspbian. The name of the driver is defined using the kernel version and build number. Use command uname -a to check your kernel version and build and the file to download will be 8192eu-kernel-build.tar.gz.

As an example my Pi B 2 uname -a shows
Linux Pi-B-2 3.18.10-v7+ #774 SMP PREEMPT Wed Mar 25 14:10:30 GMT 2015 armv7l GNU/Linux
so the driver to download for my Pi B 2 would be 8192eu-3.18.10-v7-774.tar.gz.

Another example my Pi A uname -a shows
Linux pi-A 3.18.9+ #768 PREEMPT Sun Mar 15 18:59:03 GMT 2015 armv6l GNU/Linux
so the driver to download for my Pi A would be 8192eu-3.18.9-768.tar.gz.

To download and install use the commands
wget https://dl.dropboxusercontent.com/u/80256631/8192eu-kernel-build.tar.gz
tar xzf 8192eu-kernel-build.tar.gz
./install.sh
substituting the kernel and build values from your uname -a command in the filename for the wget and tar commands.

Hopefully this is not too confusing and you can download the driver and get your wifi up and running.


MrEngman
Hello, can you get me driver for 4.1.6+? Thank

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Tue Aug 25, 2015 3:19 pm

d4vidb wrote:
MrEngman wrote:
puddle wrote:hello
i also have the e1 version i'm trying to use with my pi2 b+. I rolled back from 3.18.10-v7+ to use mr engmans driver but the links are expired. anyone willing to provide a working driver with our device id or possibly a little guide on how to modify/compile it ourselves so to be able to update freely until it is included?
There is a linux driver for this model on the Australian website http://support.dlink.com.au/Download/do ... pe=Drivers
I've tried to install it but it fails on the "make"command. Any advice would be appreciated.
tia
I have drivers available for all 3.18 versions of raspbian. The name of the driver is defined using the kernel version and build number. Use command uname -a to check your kernel version and build and the file to download will be 8192eu-kernel-build.tar.gz.

As an example my Pi B 2 uname -a shows
Linux Pi-B-2 3.18.10-v7+ #774 SMP PREEMPT Wed Mar 25 14:10:30 GMT 2015 armv7l GNU/Linux
so the driver to download for my Pi B 2 would be 8192eu-3.18.10-v7-774.tar.gz.

Another example my Pi A uname -a shows
Linux pi-A 3.18.9+ #768 PREEMPT Sun Mar 15 18:59:03 GMT 2015 armv6l GNU/Linux
so the driver to download for my Pi A would be 8192eu-3.18.9-768.tar.gz.

To download and install use the commands
wget https://dl.dropboxusercontent.com/u/80256631/8192eu-kernel-build.tar.gz
tar xzf 8192eu-kernel-build.tar.gz
./install.sh
substituting the kernel and build values from your uname -a command in the filename for the wget and tar commands.

Hopefully this is not too confusing and you can download the driver and get your wifi up and running.


MrEngman
Hello, can you get me driver for 4.1.6+? Thank
Just use the info in the post to get the driver filename to download and install the driver.

What does command uname -a show?


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

d4vidb
Posts: 4
Joined: Tue Aug 25, 2015 11:53 am

Re: D.Link DWA 131 WLAN/USB Adapter not working

Tue Aug 25, 2015 5:50 pm

This uname -a prints:

Code: Select all

Linux smart-home 4.1.6+ #810 PREEMPT Tue Aug 18 15:19:58 BST 2015 armv6l GNU/Linux
And lsusb:

Code: Select all

root@smart-home:~# lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 005: ID 2001:3319 D-Link Corp.

MrEngman
Posts: 4032
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: D.Link DWA 131 WLAN/USB Adapter not working

Tue Aug 25, 2015 7:15 pm

d4vidb wrote:This uname -a prints:

Code: Select all

Linux smart-home 4.1.6+ #810 PREEMPT Tue Aug 18 15:19:58 BST 2015 armv6l GNU/Linux
And lsusb:

Code: Select all

root@smart-home:~# lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 005: ID 2001:3319 D-Link Corp.
So kernel version is 4.1.6+ and build is #810 so to download and install use commands

Code: Select all

wget https://dl.dropboxusercontent.com/u/80256631/8192eu-4.1.6-810.tar.gz
tar xzf 8192eu-4.1.6-810.tar.gz
./install.sh
and after running the ./install.sh command, reboot to bring up the driver.


MrEngman
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Return to “Troubleshooting”