nicosalto wrote:Unfortunately i didn't found any keyboard compatible with the raspberry pie.
Do there a way to activate the ssh and the network before arriving to the raspi-config page ?
For the moment the pie doesn't show up on my network ...
For a list of compatible keyboards etc. see the wiki at http://elinux.org/RPi_VerifiedPeripherals#USB_Keyboards
(in my experience most "cheap and cheerful" wired USB keyboards work O.K. - it's the wireless ones with hubs, lights, bells, whistles ...
that are "power hungry").
IIRC, Wheezy Raspbian has ssh enabled by default, and the wired LAN should get an IP address via DHCP from your router (a WiFi dongle/connection will require configuration). So, if you can log in to your router's admin webpage you should be able to find the Pi's currently assigned IP address and ssh into it. Whilst "raspi-config" normally runs once on "first boot" it can be re-run (as user pi) via "sudo raspi-config".
Edit: "Pipped at the post" by drgeoff
Still running Raspbian Jessie on some older Pi's (an A, B1, B2, B+, P2B, 3xP0, P0W) but Stretch on my 2xP3A+, P3B+, P3B, B+, A+ and a B2. See: https://www.cpmspectrepi.uk/raspberry_pi/raspiidx.htm