I have the official Debian image installed in my RP. I use a 2 TB external hard disk connected by USB formatted in ext3, and configured like this in /etc/fstab
the UUID is for the partition /dev/sda1. The issui is RP doesn't boot right if the HD is connected because during boot: system stops on "mounting /dev/sda1..." and never continues. But the boot goes fine if HD is not connected at first and I mount that partition after boot by command line.
Code: Select all
UUID=669c9bb5-a0d0-4fa2-907d-22b3522a67d2 /media/disk1 ext3 defaults,nodiratime 0 0