serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

A/V connection problem

Fri Jun 29, 2018 7:57 am

Hi friends!
I have the Raspberry PI 3 B+.
I can't connect it whith TV via A/V output. There isn't a picture on TV.
I bought cable for MP3 player and little modified it like on schema on internet. Multimeter test is OK.
Maybe I should edit some setings on device?
Help me please.

User avatar
DougieLawson
Posts: 35340
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website Twitter

Re: A/V connection problem

Fri Jun 29, 2018 11:06 am

https://www.raspberrypi-spy.co.uk/2014/ ... ideo-jack/

What's your TV standard? The default if you add nothing to /boot/config.txt is that the AV video is NTSC 60Hz 480i.
Note: Having anything remotely humorous in your signature is completely banned on this forum.

Any DMs sent on Twitter will be answered next month.

This is a doctor free zone.

serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

Re: A/V connection problem

Fri Jun 29, 2018 11:36 am

DougieLawson wrote:
Fri Jun 29, 2018 11:06 am
https://www.raspberrypi-spy.co.uk/2014/ ... ideo-jack/

What's your TV standard? The default if you add nothing to /boot/config.txt is that the AV video is NTSC 60Hz 480i.
I followed this instruction.
And how can I find standard of my TV? It's model LG 21FS2CG-TS

User avatar
DougieLawson
Posts: 35340
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website Twitter

Re: A/V connection problem

Fri Jun 29, 2018 12:21 pm

What country are you in?

add

Code: Select all

sdtv_mode=2
sdtv_aspect=1
That sets it to PAL 50Hz 576i 4:3.
Note: Having anything remotely humorous in your signature is completely banned on this forum.

Any DMs sent on Twitter will be answered next month.

This is a doctor free zone.

fruitoftheloom
Posts: 19766
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: A/V connection problem

Fri Jun 29, 2018 12:59 pm

serozhax wrote:
Fri Jun 29, 2018 11:36 am
DougieLawson wrote:
Fri Jun 29, 2018 11:06 am
https://www.raspberrypi-spy.co.uk/2014/ ... ideo-jack/

What's your TV standard? The default if you add nothing to /boot/config.txt is that the AV video is NTSC 60Hz 480i.
I followed this instruction.
And how can I find standard of my TV? It's model LG 21FS2CG-TS

SDTV Modes

https://www.raspberrypi.org/documentati ... t/video.md
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Buster.
Raspberry Pi Model 2B v1.1

serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

Re: A/V connection problem

Fri Jun 29, 2018 1:29 pm

DougieLawson wrote:
Fri Jun 29, 2018 12:21 pm
What country are you in?

add

Code: Select all

sdtv_mode=2
sdtv_aspect=1
That sets it to PAL 50Hz 576i 4:3.
I'm from Russia

drgeoff
Posts: 9344
Joined: Wed Jan 25, 2012 6:39 pm

Re: A/V connection problem

Fri Jun 29, 2018 1:48 pm

Russia choose to follow France and use SECAM. However most TVs that can decode SECAM also decode PAL.

In any case, it is extremely rare that the wrong* setting of sdtv_mode in config.txt will of itself be the reason for nothing appearing on a TV screen.

(* Even 525/625)
Last edited by drgeoff on Fri Jun 29, 2018 1:50 pm, edited 1 time in total.

fruitoftheloom
Posts: 19766
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: A/V connection problem

Fri Jun 29, 2018 1:50 pm

serozhax wrote:
Fri Jun 29, 2018 7:57 am
Hi friends!
I have the Raspberry PI 3 B+.
I can't connect it whith TV via A/V output. There isn't a picture on TV.
I bought cable for MP3 player and little modified it like on schema on internet. Multimeter test is OK.
Maybe I should edit some setings on device?
Help me please.

Cable issue ???

https://www.raspberrypi-spy.co.uk/2014/ ... ideo-jack/
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Buster.
Raspberry Pi Model 2B v1.1

pksato
Posts: 295
Joined: Fri Aug 03, 2012 5:25 pm
Location: Brazil

Re: A/V connection problem

Fri Jun 29, 2018 2:02 pm

Hi,
Or need to force composite output disabling HDMI.

Code: Select all

hdmi_ignore_hotplug=1
From wikipedia Russia use Secam as ATV color system. But, LG TV also is compatible with PAL.

drgeoff
Posts: 9344
Joined: Wed Jan 25, 2012 6:39 pm

Re: A/V connection problem

Fri Jun 29, 2018 2:03 pm

1. Is the RPi actually booting?

2. Ensure nothing is plugged in to the RPi's HDMI socket when powering up.

3. What OS is on the card? Has NOOBS been used?

serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

Re: A/V connection problem

Fri Jun 29, 2018 2:27 pm

drgeoff wrote:
Fri Jun 29, 2018 2:03 pm
1. Is the RPi actually booting?

2. Ensure nothing is plugged in to the RPi's HDMI socket when powering up.

3. What OS is on the card? Has NOOBS been used?
1. I have updated system today.
2. Nothing is plugged in to the RPi's HDMI socket.
3. OS Raspbian. Installed without NOOBS.

Maybe there is cable issue... But I checked it for many times...
1 - Video
2 - Ground
3 - Right Audio
4 - Left Audio

serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

Re: A/V connection problem

Fri Jun 29, 2018 2:39 pm

pksato wrote:
Fri Jun 29, 2018 2:02 pm

From wikipedia Russia use Secam as ATV color system. But, LG TV also is compatible with PAL.
How to set it up? SECAM instead PAL.

drgeoff
Posts: 9344
Joined: Wed Jan 25, 2012 6:39 pm

Re: A/V connection problem

Fri Jun 29, 2018 2:46 pm

serozhax wrote:
Fri Jun 29, 2018 2:39 pm
pksato wrote:
Fri Jun 29, 2018 2:02 pm

From wikipedia Russia use Secam as ATV color system. But, LG TV also is compatible with PAL.
How to set it up? SECAM instead PAL.
TVs can often automatically switch between PAL and SECAM.

But even if the PAL/SECAM setting is not correct you would get a black and white display.

You did not confirm that the RPi is booting.

serozhax
Posts: 6
Joined: Fri Jun 29, 2018 7:41 am

Re: A/V connection problem

Fri Jun 29, 2018 2:55 pm

pksato wrote:
Fri Jun 29, 2018 2:02 pm

Code: Select all

hdmi_ignore_hotplug=1
IT WORKS!!!! Thank you!!!

P.S. If i want connect HDMI must I change this setting?

pksato
Posts: 295
Joined: Fri Aug 03, 2012 5:25 pm
Location: Brazil

Re: A/V connection problem

Fri Jun 29, 2018 5:26 pm

serozhax wrote:
Fri Jun 29, 2018 2:55 pm
pksato wrote:
Fri Jun 29, 2018 2:02 pm

Code: Select all

hdmi_ignore_hotplug=1
IT WORKS!!!! Thank you!!!

P.S. If i want connect HDMI must I change this setting?
Yes, need to set to 0 or comment or remove the line.

klricks
Posts: 6428
Joined: Sat Jan 12, 2013 3:01 am
Location: Grants Pass, OR, USA
Contact: Website

Re: A/V connection problem

Fri Jun 29, 2018 9:47 pm

serozhax wrote:
Fri Jun 29, 2018 2:55 pm
pksato wrote:
Fri Jun 29, 2018 2:02 pm

Code: Select all

hdmi_ignore_hotplug=1
IT WORKS!!!! Thank you!!!

P.S. If i want connect HDMI must I change this setting?
When using the default settings of Raspbian (Not NOOBS), the RPi will automatically use HDMI if connected at boot. If no HDMI is connected then the RPi will automatically switch to composite (AV) on boot.
You only need to change the setting for PAL:

Code: Select all

sdtv_mode=2
Unless specified otherwise my response is based on the latest and fully updated Raspbian Buster w/ Desktop OS.

Return to “Troubleshooting”