topthumb
Posts: 6
Joined: Sat Feb 24, 2018 2:06 am

Octopi Web Interface can not be reached

Sat Feb 24, 2018 8:07 am

Whoever said this thing works out-of-the-box should go to Vegas because they are the luckiest person alive, I've fought this thing on every step of the tutorial. I was able to get Putty to recognize and connect and made all the needed changes then the next step is to connect to the web interface, well, you guessed it, type in the IP for the Octopi in my web browser and it says it can't be reached, make sure you have the correct address. Both AngryIP and my linksys router tell me that the Octopi is on the same IP.

pcmanbob
Posts: 4571
Joined: Fri May 31, 2013 9:28 pm
Location: Mansfield UK

Re: Octopi Web Interface can not be reached

Sat Feb 24, 2018 3:10 pm

Hi.

I suggest you raise the problem or ask a question on octoprint communities which is were the official support of octopi is.

https://plus.google.com/communities/102 ... 9328485741

or contact the person who wrote the tutorial you are following.
Remember we want information.......................no information no help
The use of crystal balls & mind reading is not supported

topthumb
Posts: 6
Joined: Sat Feb 24, 2018 2:06 am

Re: Octopi Web Interface can not be reached

Sat Feb 24, 2018 6:12 pm

Will try that link, thanks

Return to “Troubleshooting”