ivantesl
Posts: 7
Joined: Wed Jul 20, 2016 3:47 pm

Sound

Wed Jul 20, 2016 3:55 pm

Im using a PI 3, with noobs lite and I installed LibreElect on 2 GB SD card. Everything works fine except I cant hear anything, I plugged in my earphones and there is no sound. Help please,

RAZERZ
Posts: 57
Joined: Mon Jun 13, 2016 4:56 pm

Re: Sound

Mon Jul 25, 2016 1:07 pm

Open a terminal window and type;

Code: Select all

sudo nano /boot/config.txt
Then look for "hdmi_drive=2" and remove the "#" sign before the line. Once that is done, hit ctrl+x and y and enter. Then type;

Code: Select all

sudo reboot
And you should be good to go.
Raspberry pi 3 set up as desktop with raspbian.
I guess you can say I am not newbie with linux but I am not a master at it either.
I will always try to help you as much as I can because I know how hard it is to run into problems :D

fruitoftheloom
Posts: 25837
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: Sound

Mon Jul 25, 2016 1:20 pm

ivantesl wrote:Im using a PI 3, with noobs lite and I installed LibreElect on 2 GB SD card. Everything works fine except I cant hear anything, I plugged in my earphones and there is no sound. Help please,
LibreElec's KODI interface Sound Output Setting is likely set to HDMi:

http://kodi.wiki/view/Audio_settings
The information is out there....you just have to let it in.

My other Linux machines are a ChromeBox & Intel CoreDuo Desktop

Return to “Troubleshooting”