I am having trouble getting HDMI output to two Samsung tvs. It seems like the pi does not boot up while the hdmi cable is plugged into the pi. If I start the pi without the HDMI cable plugged in and plug the cable in after it works. I have tried on three other tvs and it works fine.
I have tried
hdmi_force_hotplug=1
hdmi_safe=1
Currently I have this code in the config file
hdmi_force_hotplug=1
hdmi_ignore_edid=0xa5000080
config_hdmi_boost=4
hdmi_group=1
hdmi_mode=4
When I apply power to the pi both the red and green leds are on solid