vdesmedt wrote: ↑
Sat May 14, 2016 4:13 pm
Am I the only one not finding the radius of the rounded corner of the lens ?
The filet radius I came up with is 6.01211 mm, that is if the stl file listed that I compared it too is accurate which I'm starting to doubt now based on the measurements of my own screen on my retropi console
I measured 110.76mm on my screen which is what I'll use as a confirmation of my template and the official drawings accuracy.
Based on that, the filet radius is based on my measurements and I will confirm this with a quick print is 3.88mm
I just printed a screen template and the STL provided I believe is designed to deal with shrinkage following a print job, but since I print nearly everything with some variation of Taulman Nylon this will not work; the drawing provided in previous posts is the correct sizing for sure.
Having said that; the corner filet I printed just now fits perfect, the filet radius is 7.017mm
If you use the drawing to build the screen or use it as a reference, the measurements provided should work perfectly.
After I finish building my new console, I'll post the correct to scale screen as an STL so you can use it for future projects.