Being totally new to Raspberry Pi and Linux, I found it quite a challenge to get this setup together. I was so glad with the result that I decided to make a video of it.
It took me a couple of hours to find all this myself. In the end, I had an excellent working touchscreen! So I hope this post will help some of you!
The screen does NOT work with NOOBS. EDIT: It does work, if fully updated and upgraded.
You need to download Raspbian Wheezy and create a new SD card with that distro.
Download here: https://www.raspberrypi.org/downloads/raspbian/
To create your SD card: https://www.raspberrypi.org/documentati ... /README.md
and do this: https://www.raspberrypi.org/documentati ... windows.md
Connect the RPI to a standard screen and update and upgrade Raspbian Wheezy.
When connection the screen to RPI, make sure you get the connectors and the power cords right. (Some tutorials show a misleading picture with the power connectors on the wrong place.)
Here is the official installation guide, with really good pictures:
http://www.element14.com/community/docs ... y#installI