Hi, I made couple covers. It appears to be radius close to 7 mm, but I just eyeballed it.vdesmedt wrote:Am I the only one not finding the radius of the rounded corner of the lens ?
Thanks Jakeh12, I made the same measurement but it is comfortable to know you had some concrete successes with itjakeh12 wrote:It appears to be radius close to 7 mm, but I just eyeballed it.
All the mounting hole dimensions are there, and can be referenced from the edge of the screen and/or the metal back pan. Like many drawings you have to do some math to obtain dimensions not specifically detailed on the drawing.src123 wrote:am i the only one who is not getting the dimensions between the outer and the inner screw drills?
I loaded that stl while rebuilding the screen from the drawing and I noticed that it's bigger than the measurements given, as you can see from the overlap lines in the picture provided; has anyone confirmed that this build is accurate or if the drawing is not?aBUGSworstnightmare wrote: ↑Tue Dec 06, 2016 8:41 pmSTL file from spark fun https://cdn.sparkfun.com/3D_Models/prod ... 33/stl.zip
The filet radius I came up with is 6.01211 mm, that is if the stl file listed that I compared it too is accurate which I'm starting to doubt now based on the measurements of my own screen on my retropi console
Users browsing this forum: No registered users and 7 guests