Posts: 87
Joined: Tue Oct 28, 2014 6:44 am

.dtbo Vs .dtb

Mon Oct 02, 2017 4:35 am

Device tree puzzles me greatly but I'm making the effort. I've got a w1-gpio-intpullup-overlay.dtb file from my Wheezy days with the DS18B20 that I'd like to use with Jessie. Alas this is pushing my userland slum credentials. Anybody know how to convert this to a Jessie compatible .dtbo file?

Posts: 87
Joined: Tue Oct 28, 2014 6:44 am

Re: .dtbo Vs .dtb

Mon Oct 02, 2017 5:19 am

I get this when I try to use the Wheezy .dtb as a .dtbo in Jessie
[ 6.517364] w1-gpio onewire@0: gpio pin 4, external pullup pin -1, parasitic power 0
[ 6.517414] w1_add_master_device: set_pullup requires write_byte or touch_bit, disabling

User avatar
Posts: 31214
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website

Re: .dtbo Vs .dtb

Mon Oct 02, 2017 8:47 pm

The latest Raspbian Stretch (wheezy has expired, Jessie has retired) includes two Raspberry Pi Foundation dtb overlays for 1-wire devices. Before continuing with your stuff, try those.

The souce for both of those is available at
Microprocessor, Raspberry Pi & Arduino Hacker
Mainframe database troubleshooter
MQTT Evangelist
Twitter: @DougieLawson

Since 2012: 1B*5, 2B*2, B+, A+, Zero*2, 3B*3

Please post ALL technical questions on the forum. Do not send private messages.

Return to “Device Tree”

Who is online

Users browsing this forum: No registered users and 2 guests