Posts: 2
Joined: Tue Sep 11, 2018 3:28 pm

Win10 IoT - Printing to Thermal Printer from Serial Port

Tue Sep 11, 2018 10:24 pm

Good Day Everyone!

I have a RS232 Thermal Printer ( ... uct_id=760)
Which I successfully connected to a USB converter.
I have also successfully installed Silab's USB to UART Driver in my Win10 IoT Device.
Using the SerialSample from the Iot Sample, I have successfully connected to the Serial Port and sent some bytes.

My problem is the code for printing texts/data itself.
I only have the reference from UWP's Printing Sample which unfortunately PrintManager is not supported.
Most of the source too that I have found in search are for Rasbian using CUPS.
Hopefully someone can point me out to where I can start the printing process.
Thank you!

Posts: 10663
Joined: Fri May 31, 2013 9:28 pm
Location: Mansfield UK

Re: Win10 IoT - Printing to Thermal Printer from Serial Port

Sat Sep 15, 2018 10:45 am


I don't know if you will get much support for win10 IoT here, but they do have there own support forum , training and projects pages on their web site. ... /Community

some other useful pages ... getstarted
We want information… information… information no help
The use of crystal balls & mind reading are not supported

Return to “Windows 10 for IoT”