brouk
Posts: 2
Joined: Sun Nov 29, 2015 2:49 pm

Somagic EasyCap grabber driver

Sun Nov 29, 2015 3:23 pm

Hello,
Just trying to figure out how I can Install the somagic driver on IoT? This is needed for running my EasyCap garbber
Image

I am quiet a starter on Rpi2 and first try out with Raspbian. Downloading and installing the official releases following instructions from easycap-somagic-linux https://code.google.com/p/easycap-somagic-linux/ and I have been able to grab with somagic-capture.

Now I really do not know how to process that on IoT!
I tired to follow this : http://embedded101.com/Blogs/David-Jone ... ial-driver
As :
  • devcon.exe dp_add c:\Users\Administrator\Documents\EasyCap_SOMAGIC_1.0.8.28\Win7_32\SmiUsbGrabber3C.inf
  • devcon status "USB\VID_1C88&PID_0007"
I got :
-- USB\VID_1C88&PID_0007\SMBL007
-- Name: SM-USB 007
-- The device has the following problem: 28
-- Problem status: 0xC0000490

I suppose then that this driver need to be compiled for ARM platform?
Or is there a way to do like for Raspbian (extracting firmware...)

ricl
Posts: 657
Joined: Wed Aug 26, 2015 11:55 am

Re: Somagic EasyCap grabber driver

Sun Nov 29, 2015 5:41 pm

From the link you supplied at http://embedded101.com/Blogs/David-Jone ... ial-driver

CM_PROB_FAILED_INSTALL

The device's drivers are not installed.

Error Code

28

Display Message (Windows 2000 and later versions of Windows)

"The drivers for this device are not installed. (Code 28)"

You might like to try "Generic USB communication" viewtopic.php?t=117061&p=847157 to get the very basic communication going but beyond that you are on your own (as this is not on the supported products list at MS).

You could try asking Somagic what plans they have to support their devices under Windows IoT on the Pi.
ricl : F/gamma = ma : Law ii(a) : https://climatedatablog.wordpress.com/2016/01/02/an-energy-challenge-2016/ #AnEnergyChallenge2016

Deovi
Posts: 4
Joined: Mon Mar 14, 2016 1:32 am

Re: Somagic EasyCap grabber driver

Mon Mar 14, 2016 1:34 am

I'm getting this exact error but I'm connecting and Arduino Nano.

brouk
Posts: 2
Joined: Sun Nov 29, 2015 2:49 pm

Re: Somagic EasyCap grabber driver

Sun Jun 05, 2016 6:28 pm

Hello Deovi,
Did you find any solution :?: ?

Thanks for the generic usb device, I tried out the solution but I still get same error.
I replace VID/PID as following: VID_1C88&PID_003C that I extracted from SmiUsbGrabber3C.inf file.
but still code :28 :?

Best

ahmedmabrouk
Posts: 1
Joined: Thu May 31, 2018 8:50 am

Re: Somagic EasyCap grabber driver

Thu May 31, 2018 8:57 am

hello ,
can u help me in installing somagic easy cap on raspberry pi 3 , i tried using the like u added to the post but i couldnt , i will very appreciate that

fruitoftheloom
Posts: 17487
Joined: Tue Mar 25, 2014 12:40 pm

Re: Somagic EasyCap grabber driver

Thu May 31, 2018 11:30 am

ahmedmabrouk wrote:
Thu May 31, 2018 8:57 am
hello ,
can u help me in installing somagic easy cap on raspberry pi 3 , i tried using the like u added to the post but i couldnt , i will very appreciate that

Windows 10 IoT Core has changed over the last 2 years, may I suggest you run the latest Insider Preview release.


Regards your device you will likely need to write a UWP Universal Driver:

https://docs.microsoft.com/en-us/window ... ercreation
Adieu

Return to “Windows 10 for IoT”

Who is online

Users browsing this forum: No registered users and 4 guests