AndrosovIgor
Posts: 6
Joined: Thu Aug 06, 2015 6:19 pm

Graphic problems

Thu Aug 06, 2015 6:32 pm

Hi there!

I have problem with WIn IoT.
I just flash it to SD card.
this is my config file (standart for windows IoT):

Code: Select all

gpu_mem=32                  # set ARM to 480Mb DRAM, VC to 32Mb DRAM
framebuffer_ignore_alpha=1  # Ignore the alpha channel for Windows.
framebuffer_swap=1          # Set the frame buffer to be Windows BGR compatible.
disable_overscan=1          # Disable overscan
init_uart_clock=16000000    # Set UART clock to 16Mhz
hdmi_group=2                # Use VESA Display Mode Timing over CEA
But, in dispalay I see this:

Image

This is base screen of Windows IoT


Can some one help me?

User avatar
DougieLawson
Posts: 35540
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website Twitter

Re: Graphic problems

Thu Aug 06, 2015 8:33 pm

It's very difficult to help when your link to your screen shot failed dismally.

Put the picture on http://imgur.com, post the IMGUR "direct link" on here in [IMG] tags.
Note: Having anything remotely humorous in your signature is completely banned on this forum. Wear a tinfoil hat and you'll get a ban.

Any DMs sent on Twitter will be answered next month.

This is a doctor free zone.

Heater
Posts: 12966
Joined: Tue Jul 17, 2012 3:02 pm

Re: Graphic problems

Thu Aug 06, 2015 9:18 pm

Your screen is supposed to look like this:
Image

I know, bad joke.

User avatar
kusti8
Posts: 3439
Joined: Sat Dec 21, 2013 5:29 pm
Location: USA

Re: Graphic problems

Thu Aug 06, 2015 11:45 pm

Heater wrote:Your screen is supposed to look like this:
Image

I know, bad joke.
That reminds me of my signature. ;)
There are 10 types of people: those who understand binary and those who don't.

AndrosovIgor
Posts: 6
Joined: Thu Aug 06, 2015 6:19 pm

Re: Graphic problems

Fri Aug 07, 2015 4:11 am

Hi again!

This is an image of screen
Image

User avatar
DougieLawson
Posts: 35540
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website Twitter

Re: Graphic problems

Fri Aug 07, 2015 9:38 am

Shut it down.
Pull the card and insert it in your laptop.
A drive EFIESP (F:) should appear note: the drive letter may be different.

Edit F:\config.txt with notepad. It should look something like this:

Code: Select all

gpu_mem=32                  # set ARM to 480Mb DRAM, VC to 32Mb DRAM
framebuffer_ignore_alpha=1  # Ignore the alpha channel for Windows.
framebuffer_swap=1          # Set the frame buffer to be Windows BGR compatible.
disable_overscan=1          # Disable overscan
init_uart_clock=16000000    # Set UART clock to 16Mhz
hdmi_group=2                # Use VESA Display Mode Timing over CEA
Change it to this for the last two lines

Code: Select all

hdmi_group=2                # Use VESA Display Mode Timing over DMT
hdmi_mode=16
save the file, pop it back in your RPi and reboot. Mode 16 gives you 800x600 which should work on any monitor or TV.
Note: Having anything remotely humorous in your signature is completely banned on this forum. Wear a tinfoil hat and you'll get a ban.

Any DMs sent on Twitter will be answered next month.

This is a doctor free zone.

AndrosovIgor
Posts: 6
Joined: Thu Aug 06, 2015 6:19 pm

Re: Graphic problems

Fri Aug 07, 2015 5:08 pm

Thanks, it solve this issue :)

Return to “Windows 10 for IoT”