slim

tony1812

Hello, I have pi3 attached to the official 7" lcd display, in order to make it thinner, I yanked out all usb and ethernet ports to make it slimmer, which works fine. To slim even further, on the 7" lcd, there is also a full size usb on its circuit board. I am wondering if I yank out that USB ...

Bitmann

Hi all! I'm new to Raspberry Pi and I wanted to use an external hard drive as my primary storage.. so went and got a Seagate BUP Slim BK 1TB HDD. It is not externally powered. My Pi is set up with Raspbian, and is up to date. When I turn on the device and run sudo fdisk -l I only see my ...

PeterO

... of specific devices or adapters that are compatible with the Pi3 USB bootloader (for no SD card booting). They are various generations of their "slim portable drive" and "bavkup plus portable drive". I've got eight of them. One has failed, but that was probably something to do with it falling ...

cabbagecreek

... some other idea how to get power to the Rpi by NOT using the USB. The disadvantage of using the USB is that there will be a huge connector on a slim case = looks ugly.

W. H. Heydt

... if such an unpopulated Pi3b was available (in single units), I'd definitely buy at least one, whetherr that be a Pi without the Ethernet port and slim USB ports, or no Ethernet port / no USB at all, either option interests me. Well...if you think a Pi3B with only a single USB port would be worth ...

Imperf3kt

... if such an unpopulated Pi3b was available (in single units), I'd definitely buy at least one, whetherr that be a Pi without the Ethernet port and slim USB ports, or no Ethernet port / no USB at all, either option interests me. But lets not turn this into a locked thread by discussing wishlists. ...

Jamicron

I have a plan to create a NAS box in a lunch box. I was going to use a pi zero W, a slim ext hdd, usb sticks and a powered usb hub. I'd be using the wifi on the pi to connect to the network and the powered hub would double as the data link and psu. This way the only ...

W. H. Heydt

drgeoff wrote: ↑
Mon Jan 29, 2018 4:53 pm
Two chances - slim and fat.

And Slim just left town.

drgeoff

Two chances - slim and fat.

(Ever wonder why the response "Fat chance!" means what it does.)

pnguine

Hi all.
pi3. Installed xfce4 and slim as I use them on my other linux boxes. It all works fine but the 'original' pixel desktop/UI is gone - even in a LXDE or 'Default' session. Anybody know how to get it back (and still use xfce4)?
TIA

pnguine

bensimmo

... iron, some strong snips and the ability to swear loudly ;-) You'll want to be looking for a 2A+ powerboost. Best bet is to pull the cover off some slim "USB batteries" as you'll have the battery & the charging setup. While it can run off a 1A quality usb battery, it might not with all your attachment.

awesomelydeluxe

Hey y'all! I got a Raspberry Pi Zero for Christmas and I wanted to make a slim computer, something like an iPod or something. I want a touchscreen between 3.5" - 5". Where can I get one and how can I connect it. (BTW, I hate HDMI, so i was thinking an alternative)

W. H. Heydt

... That this can all be done and still get the boards out the door and enough less than $5 or $10 to let both the RPT and the retailers make even a slim profit is actually pretty astonishing. I suggested some time back that Pi0s (and Pi0Ws) be sold in "packs" as a way to reduce the cost of handling ...

broe23

There have been some people who have modified for a better antenna. I would just use a USB adapter for wifi. You would get better range. You can get the slim units that are not that far out of the USB port.

AnnaKat

I'll suggest you use the CM3L model. With this, you'll need to create a carrier board, but by doing so, you can make it slim enough to be a thick tablet. If your goal is a Pokèdex lookalike, then you may find the cost prohibitively expensive. I appreciate the feedback. You say the ...

Imperf3kt

... not what OP is asking for. I'll suggest you use the CM3L model. With this, you'll need to create a carrier board, but by doing so, you can make it slim enough to be a thick tablet. If your goal is a Pokèdex lookalike, then you may find the cost prohibitively expensive. To give you an idea, here's ...

davidcoton

... OHIO Superboard 2 (Challenger II P) instead, I must have spent more hours programming than I spent playing Space invaders later.. Programing was a slim version of Basic, then Machine code could be used by poking data in to the Memory locations one at a time, there was no way back so any mistakes ...

W0LFIE

... OHIO Superboard 2 (Challenger II P) instead, I must have spent more hours programming than I spent playing Space invaders later.. Programing was a slim version of Basic, then Machine code could be used by poking data in to the Memory locations one at a time, there was no way back so any mistakes ...

aegidius

Just found this for any slim SATA drive:
https://www.ebay.com.au/itm/New-USB-3-0 ... 2692341082
This should do the trick...

pcsabi93

... I can connect it to a screen, but I don't have such a monitor, which would not make this whole setup too robust. As an alternative, a tablet is slim enough, however, the connection here seems to be tricky. I am thinking of setting up a vnc server, but the problem is, that I can't see the video ...

mwrich4

I would rather hope for a clarification about the apparent rationing still in effect. Yes, it's understandable that margins are slim. I appreciate the effort to build a low-cost platform to distribute to educators. But, based on the site, my thoughts are that the low-cost ZeroPi platform ...

... I've done stuff with relays before so maybe that's the best (safest?) way, but it means more hardware for a project I was hoping to keep small and slim. Connecting directly to the Pi would be great if possible, as the Zero is nice and small to fit in the existing casing. Any advice greatly appreciated. ...

... done to the 2707 to get to the 2708. The GPU was made more powerful, the 3D engine was completely new, the ISP was improved new peripherals (e.g. SLIM bus) and a lot more like the approval we got to add an ARM core. The SMI however was the same as the chip BEFORE the 2707 and I think even the ...

Gert van Loo

... done to the 2707 to get to the 2708. The GPU was made more powerful, the 3D engine was completely new, the ISP was improved new peripherals (e.g. SLIM bus) and a lot more like the approval we got to add an ARM core. The SMI however was the same as the chip BEFORE the 2707 and I think even the ...

Fer

... for a certain target market, which is basically the lower tier of smartphones. Camera modules for smartphones are universally designed to be as slim as possible, which implies very short backfocal distance and shorty focal lenses. All manufacturers follow this rule for this market segment. This ...

Search found 1204 matches: slim

Yank out official 7" lcd usb?

use Seagate BUP Slim BK 1TB HDD with RPI

Re: boot from USB on RasPi3

Power the Rpi 3 without USB

Re: unassembled pi3

Re: unassembled pi3

Pi Zero for NAS ?

Re: Any chances to run full windows?

Re: Any chances to run full windows?

xfce4 - lost pixel desktop

Re: Projet switch : Is this gonna work ?

touchscreen between 3.5" - 5" for Pi Zero

Re: pi zero w in quantities of 10...50

Re: Name of a part on the Pi3

Re: Parts for building a tablet

Re: Parts for building a tablet

Re: What was your first computer?

Re: What was your first computer?

Re: DVD drive with USB micro-B cable?

Re: Using an android tablet to play a video from an RPI Zero

Re: Pi Zero W availability

Using the GPIO with an Appliance Button

Re: Anybody interested in talking direct! to IDE/SATA?

Re: Anybody interested in talking direct! to IDE/SATA?

Re: Custom lens shading tables