openvpn

TerryC65

If the answer to question 1 is No, then I assume that the only way to get this working is to have two Pis, each with dual Ethernet ports (one for the Router side and one for the private network side. Answering myself in part; if the problem is that the firewall rules are being overwritten and I can...

TerryC65

... which is already running nodogsplash to create a captive portal. The problem is that as soon as PiVPN has finished installing and configuring OpenVPN, the Captive Portal stops working. Not being a networking expert, I have a suspicion that OpenVPN has overwritten some of the Firewall rules ...

epoch1970

Nothing specific to Pi here.
https://openvpn.net/faq/tls-error-tls-k ... nectivity/

izik

Hi, I am new to all this and was wondering if someone out there ran into this issue. I followed all the directions with the use of Open VPN and for some reason I keep getting this error: "tls error: tls key negotiation failed to occur within 60 seconds (check your network connectivity)" Can you plea...

epoch1970

I assume you'll be using routed server mode, and have very little practical experience with that. But the only problem I see in this case is the faint possibility that one of the remote site uses 10.8.0.0/24 for its LAN network If you want to use a virtual IP address range other than 10.8.0.0/24, yo...

TerryC65

... phones and tablets without hammering the limited download limits that the charity has. This has been installed since 2017. So. I intend to install OpenVPN on the Pi that is running the Webserver, because it already has two Ethernet ports; 192.168.0.x.x.x on eth0 (the Pi network) and eth1 with an ...

epoch1970

You could disable the service so that it does not start at boot, And get your script or the original init script get called with arguments start and stop according to the state of wlan0 With dhcpcd you could react to e.g. to BOUND on wlan0, check the value of $ifbssid (?), and take it from there. ht...

DaCapitalist

Any idea?

P17

... signals from aircraft. I can 'see' around 250 miles to the south, but only 100 miles to the north because of hills. Raspberry Pi 4B (4GB), running OpenVPN server and a Pimoroni unicorn hat, amongst other things. Plus there's that original Pi and another Zero W which I accidentally killed in a soldering ...

epoch1970

This is a new take on my old post about wireless client bridging via openvpn. The new design works on raspios, requires only configuring dhcpcd, dnsmasq and hostapd. "Super easy" if you stick to the configs provided with the project. Seems to be working fine, ...

DaCapitalist

... would like the RP4 to start the configured VPN connection to my VPN server at home on boot. I did this by checking the IP address in /etc/default/openvpn # This is the configuration file for /etc/init.d/openvpn # # Start only these VPNs automatically via init script. # Allowed values are "all", ...

DaCapitalist

Double Post, mods please remove

eddie3000

... started this thread, because ftp passive connection do work now with ufw enabled. I have a raspberry pi, at home, with raspbian 10 buster. It has openvpn (using the pivpn install script), and openssh-server (which already comes installed I think). I connect to it from my laptop (ubuntu) through ...

bls

Hello world, I have two raspberries in two sites. Both have OpenVPN running and some clients connected. First site, let's say A, has a LAN 192.168.1.0/24. Second site, let's say B, has 192.168.26.0/24. I would like to connect these two sites with a VPN, ...

dserarols

Hello world, I have two raspberries in two sites. Both have OpenVPN running and some clients connected. First site, let's say A, has a LAN 192.168.1.0/24. Second site, let's say B, has 192.168.26.0/24. I would like to connect these two sites with a VPN, ...

knute

I don't think I actually understand your configuration. Are you running an FTP server on the Pi? Are you running OpenVPN server on the Pi? Are you running apache on the Pi? If not you don't need to open any of those ports. Please explain in detail your configuration. Please show ...

rhtyd

... with Apache CloudStack on RPi4 https://rohityadav.cloud/blog/cloudstack-rpi4-kvm/ This allows me to develop and test apps locally (things like openvpn and web server, small python/Go apps and experiments with k8s/k3s/docker).

eddie3000

... are now behaving the same way. Hopefully the fix for one will fix the other. I have tried to allow ports 80, 443 and 943, but no luck. I am using openvpn to connect to the machines to access the machine's local resources and browse the web. Not that I need to use a vpn for browsing the web, I ...

eddie3000

... If I'm not mistaken, ufw default deny I think only affects the inwards direction. I think it's ufw default deny outgoing for outwards traffic. Openvpn by default uses udp, but I have set it to tcp. It works. That's not the problem. I tried your suggestion adding the following to the end of ...

DougieLawson

OpenVPN port 1194 is UDP/IP not TCP/IP.

FTP uses two ports 20 & 21 (unless you run passive (aka PASV)).

eddie3000

In debian I entered: sudo ufw allow 22 for ssh and sudo ufw allow 1194 for openvpn. I also set it to sudo ufw default deny . And ftp uploading and downloading just works. On the raspberry it doesn't work. That's why, as an ignorant user I am, I entered all types ...

antmar904

I am also very interested on getting this working

B.Goode

... Pi forums. Hello friends. I have a raspberry with raspbian buster, which I believe to be based on debian 10. I have it with openssh-server and openvpn running. I have a script that downloads and uploads to different ftp servers that are not mine. The script is triggered using cron. I am using ...

eddie3000

Hello friends. I have a raspberry with raspbian buster, which I believe to be based on debian 10. I have it with openssh-server and openvpn running. I have a script that downloads and uploads to different ftp servers that are not mine. The script is triggered using cron. I am using wget ...

odinlistening

Sorry for delay in response.

Thanks for that link - some very useful pointers there I think.

A bit of experimentation this week.

Thanks again.

Search found 4596 matches: openvpn

Re: OpenVPN and nodogsplash on the same Pi?

OpenVPN and nodogsplash on the same Pi?

Re: OpenVPN on Pi - Error tls error: tls key negotiation failed to occur within 60 seconds (check your network connectiv

OpenVPN on Pi - Error tls error: tls key negotiation failed to occur within 60 seconds (check your network connectivity)

Re: Remote Deployment of a VPN Server using PiVPN

Remote Deployment of a VPN Server using PiVPN

Re: Start OpenVPN connection AFTER internet is up

Re: Start OpenVPN connection AFTER internet is up

Re: STICKY: Introduce yourself!

Wireless client-side bridging with vxlan. Interest?

Re: Start OpenVPN connection AFTER internet is up

Re: Start OpenVPN connection AFTER internet is up

Re: UFW is blocking my ftp traffic.

Re: VPN site-to-site between two raspberries

VPN site-to-site between two raspberries

Re: UFW is blocking my ftp traffic.

Re: Should I buy 8Gb Model

Re: UFW is blocking my ftp traffic.

Re: UFW is blocking my ftp traffic.

Re: UFW is blocking my ftp traffic.

Re: UFW is blocking my ftp traffic.

Re: OpenVPN client on Raspbian (RPi 2B)

Re: UFW is blocking my ftp traffic.

UFW is blocking my ftp traffic.

Re: LED to Indicate OpenVPN Status...possible?