mono

Pulsar33

... of the team people : pulseaudio doesn't work on Pi4 and is discouraged I don't have speakers on my Pi. [...] I havent' investigated why it's only Mono As I said, yes "it works" (pulseaudio and audacity) but normal use of the audio functions is no longer possible. I'm currently trying to adapt ...

bls

... or vlc playing a video or audio stream) On pavucontrol's Playback tab, change the app's "playback on" setting to be the "built-in audio analog mono" if it is not set to this Start audacity recording, and then on pavucontrol's Recording tab, ensure that ALSA plug-in is set to record from "Monitor ...

Brooklyn

... but found nothing. I have an original Arduino UNO. My Serial poort is /dev/ttyACM0 Knipsel.PNG This what happen when I run the .exe file with mono Knipsel2.PNG I am from Belgium so my debugging in Dutch. you can see it gets stuck when he wants to read it. The problem was that Arduino have ...

besi

I have a microphone and I can record voice like so: arecord test.wav -r 22050 -f S32_LE -V mono So far so good. However, when a third party software that I'm using (which I think uses ffmpeg internally), wants to use the microphone it fails, since it does not use the ...

Pulsar33

... distribution too but every time I've installed pulseaudio, I've been facing problems. The sound is fading, has glitches, stereo falls down to mono, and other bugs ... Are you sure that there's no problem like this with Manjaro ? Should I give a try to Manjaro-ARM-kde-plasma-rpi4-19.12 ? BR ...

LdB

I worked out after there was a mono and coloured and you had mono from you image. Yes I will put in loop mode but also they give circuits so I can check the start command is acknowledged because the signals will start up to the segment driver. ...

hippy

... a Pi Zero or other Pre-3B boards. If you don't have a Pi then a 4B is likely the best choice, and possibly the more memory the better. To install Mono and VB.Net support ... sudo apt-get install mono-complete sudo apt-get install mono-vbnc pi@Pi3B:~/tmp $ mono --version Mono JIT compiler version ...

ejolson

... framework version 4.7.2 is covered? Sorry, I'm not an expert in different versions. There is some information about application portability on the Mono webpage at https://www.mono-project.com/docs/getting-started/application-portability/ According to the webpage You can continue to use Visual Studio ...

ejolson

... need? Depending on which version of Visual Basic and whether you made unlucky use of deprecated mouse interfaces, it could be as easy as vbnc for mono. https://www.mono-project.com/docs/about-mono/languages/visualbasic/ In my experience vbnc works quite well. Note that you do not need to follow ...

Gavinmc42

... booting times, it may not need Linux, even then PiCore linux takes about 12secs without tweaks. 2-3 secs for Ultibo and other bare metal Os's. 4K mono screen, perhaps one day? Nice price.

sirozha

... to Mate. I had several issues with the sound: 1. When I installed PulseAudio, I realized that the sound that was stereo under pure ALSA became mono after PulseAudio was installed. 2. Because of the mono sound, I decided to uninstall PulseAudio and run on pure ALSA. Therefore, I had to install ...

Galaxy5

... module Thanks! looks like just what I needed - they also give you wiring instructions [ur=https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/raspberry-pi-wiringl]here[/url].

mikmas

Is there any library for raspbian, where i can easily shot picture every few minutes from at least 2 USB cameras? I tried to use EmguCV, but it works perfectly only under windows. In documentation i can read that it is possible, but i must compile some repositories. I would prefer precompiled binari...

HantZ_

pourquoi pas une bdd locale sqlite avec l'outil de gestion sqlitebrowser. C'est mono-utilisateur et c'est sans doute suffisant pour toi. OK avec ernesto pour gérer la barrière infrarouge par le RPi. pour gérer le nombre de personnes un fichier contenant le nombre ...

fruitoftheloom

... mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 65536 Mono: Front Left: Playback 65536 [100%] [on] Front Right: Playback 65536 [100%] [on] Simple mixer control 'Capture',0 Capabilities: cvolume cvolume-joined ...

PranavLal

... mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 65536 Mono: Front Left: Playback 65536 [100%] [on] Front Right: Playback 65536 [100%] [on] Simple mixer control 'Capture',0 Capabilities: cvolume cvolume-joined ...

ejolson

... sound, you could split the analogue stereo audio left and right, and use a horrible hack to make it seem like two sound cards which happen to be mono! I think the difficulty of making multi-seat use work well will outweigh the cost of the additional Pi computers. Where to get the money is a different ...

speculatrix2

... sound, you could split the analogue stereo audio left and right, and use a horrible hack to make it seem like two sound cards which happen to be mono!

Pulsar33

... And this is only a limitation of ALSA because if you install pulseaudio, the audio mix can be found and used (unfortunately, you fall down to mono and you have unacceptable other drawbacks) However, have a nice day Pulsar33

totoharibo

pourquoi pas une bdd locale sqlite avec l'outil de gestion sqlitebrowser. C'est mono-utilisateur et c'est sans doute suffisant pour toi. OK avec ernesto pour gérer la barrière infrarouge par le RPi. pour gérer le nombre de personnes un fichier contenant le nombre ...

guyver2

... reader. move to a single speaker more "round" shaped, this should help arrange the electronic differently but at the cost of moving from stereo to mono. I'm open to suggestions.

sirozha

I'm using Mate Desktop with Raspbian Buster on Raspberry Pi 4B. PulseAdio causes all audio output via the on-board analog audio jack to be mono. Therefore, I uninstalled PulseAudio completely and am using ALSA exclusively. For the GUI volume applet in System Tray I'm using pnmixer because the ...

tirex

... false useAnimator true traceMouse false Start-Demo requested: vsync 1, GLCaps[rgba 8/8/8/0, opaque, accum-rgba 0/0/0/0, dp/st/ms 16/0/0, dbl, mono , hw, GLProfile[GLES3/GLES3.hw], on-scr[.]] Loading com.jogamp.opengl.demos.es2.GearsES2(1) Choosen demo com.jogamp.opengl.demos.es2.GearsES2 Create ...

AndrewK2020

Hello all, I was wondering if System.Speech is implemented in Mono for Linux or some other type of speech recognition library for my pi, also for a speech recognition program on a pi, how much RAM would I need?

996owner

... Ubuntu Mate, the issues are... I can't get Anydesk remote control software to install, Operating system is very slow and the soundcard output is mono. Given up with Mate especially as sound is mono. Now playing with. Raspbian Buster with desktop and recommended software. Much better, Stereo sound ...

Search found 4365 matches: mono

Re: RPi4 : How to record desktop audio ?

Re: RPi4 : How to record desktop audio ?

[Solved] Serial Communication between Raspberry Pi & Arduino (C# problems)

Storing parameters in .asoundrc does not apply

Re: RPi4 : How to record desktop audio ?

Re: Libraries for SPI and GPIO in 2020

Re: Run Visual Basic App on RP

Re: Run Visual Basic App on RP

Re: Run Visual Basic App on RP

Re: Pi-powered Resin Printer!

Re: analog Sound Raspberry PI 4 is mono, not stereo

Re: Analog Speaker Output Pi 4B

[Mono/C#] get frame from USB camera

Re: Contrôle d'une base de donnée avec un Raspberry

Re: No sound from 3.5mm jack on a raspberry pi 4

No sound from 3.5mm jack on a raspberry pi 4 [solved]

Re: Multi-Seat use of RPi 4

Re: Multi-Seat use of RPi 4

Re: RPi4 : How to record desktop audio ?

Re: Contrôle d'une base de donnée avec un Raspberry

Pi Boombox looking for input on improvements

Need help switching from on-board analog audio to Bluetooth audio with BlueALSA (PulseAudio uninstalled)

JOGL less performance than kmscube

[C#] Mono Speech recognition

Guidance please for a media project.