lirc

rarspace01

... (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input ...

the.hcd

... autoconf sudo apt-get install git after compiling, you install and configure with irrecord. Although you probably don't need to compile the lirc_gpio module as you are not using a IR receiver via GPIO input. In the latest release the lirc module should work. jsut configure it as described ...

bitbitbit

Hi there.... I'm getting error messages when running ./autogen.sh ./autogen.sh: 4: ./autogen.sh: autoreconf: not found ./autogen.sh: 7: ./autogen.sh: automake: not found cat: configure: No such file or directory Creating setup-driver.sh ... rpi: There is no param type, but default parameter is none,...

Frank B

Hi,
nobody uses lirc ?

selectnone

I'm a bit puzzled myself - I'm trying to get Lirc working on the latest Raspbian but haven't had any luck building it - with aron or mba's instructions...

Does anyone know if any of this stuff is going to be included in Raspbian or Lirc by default? That'd make this all a whole lot easier!

Frank B

... wheel-encoders are now working. Next plan is to write the code for the remotecontrol (x10). I took the usb-receiver from an old multimedia-lptop. Lirc is running, so this should be simple. i hope. Frank

Frank B

Hi,
i recently added an usb x10-receiver (from a old multimedia laptop) to my pi.
It is working so far,but "top" says, lirc uses 5-6%cpu.
Is this normal behaviour or is there a problem with the config?

Frank.

astrolinux22

... usbcore: registered new interface driver dvb_usb_dib0700 [ 8.121796] lirc_dev: IR Remote Control driver registered, major 251 [ 8.153468] IR LIRC bridge handler initialized [ 14.910664] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 15.599839] bcm2835 ALSA card created! [ 23.587228] smsc95xx ...

joan

I found a spare IR receiver from some I bought years ago for a LIRC board. It was surprisingly easy to interface to the Pi and may be useful as a remote control in robotics type applications. Mine is a http://uk.rs-online.com/web/p/ir-remote-receiver/6548930/ ...

c0g

I'm using my Pi (running fully updated archlinux arm) as a DVR, running TVHeadend with three capture cards (one single tuner, one dual tuner) recording to a USB enclosure with three disks in BTRFS. It seems to crash every night, becoming unresponsive to pings, keyboard interrupts and ssh. I've just ...

the.hcd

Hi all, I've followed the instructions on the latest raspbian root@raspberrypi:/lib/modules/3.2.27+/misc# uname -a Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux and have ended up getting something built, however, I get Sep 27 23:16:54 raspberrypi kernel: [ 5516...

klant

... (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing rtsp://10.158.224.6/stream1. Connecting to server 10.158.224.6[10.158.224.6]: ...

the.hcd

Just to node that on the latest release this usb device works out of the box... root@raspberrypi:/etc/lirc# uname -a Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux root@raspberrypi:/etc/lirc# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux ...

klant

... (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing rtsp://10.158.224.8/stream1. Connecting to server 10.158.224.8[10.158.224.8]: ...

Chinasaur

Hey guys, I know you've done some nice work getting a GPIO version together, but since I'm not using my USB ports I wonder if anyone has tried something like: http://www.huitsing.nl/irftdi/
?

Will still probably need some LIRC patching, so seems worth keeping the threads together? Thanks!

adamward2005

Hi there, Mythbox CAN (just about) use 0.25 MythTV backends now. I just tried it out using the OpenELEC-RPi.arm-devel-20120921180905-r11974.tar.bz2 release from http://sources.openelec.tv/tmp/image/openelec-rpi/, but it should be the same for RaspBMC I would guess. I get audio, but no video. But the...

Bencom

... No such file or directory Parsing input config file /etc/mplayer/input.conf Input config file /etc/mplayer/input.conf parsed: 92 binds Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your ...

Bencom

... (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input ...

Bencom

... (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input ...

moony

... less than 1.2MB/s. By using sftp from my PC to the Pi, it'll often crash sooner. All crashes at very random times.. No other apps beside xbmc and lirc (crashed also without lirc) running, except standard daemons.

bobguk

great set of instructions. I am having trouble in getting the transmit side to work. pi@raspberrypi ~ $ sudo irsend SEND_ONCE TECHNISAT_ST3004S ARROW_LEFT returns :- irsend: command failed: SEND_ONCE TECHNISAT_ST3004S ARROW_LEFT irsend: hardware does not support sending I have tried compiling with t...

psypi

Ah, just spotted in step 4 I should have got the 3.2.27 version of the tar.gz
I'll give that a go
feeling a bit twp.

psypi

I've just run an update on wheezy and I now think I'm on 3.2.27. This seems to have broken lirc I have followed the 33 step guide in this post to rebuild lirc but have got into trouble. step 30 did not work; it could not find lirc_dev.ko to copy, the file location now ...

smonkey

... and menu speed etc.. XBian seems to be updated more frequently, but Raspbmc has more features (it implemented pulsecec first, has much better lirc support, now has xbmc-pvr support). Personally I'm still on the fence. I have an SD card for both and just play around with whichever one I'm in ...

DexOS

Have you seen this http://aron.ws/projects/lirc_rpi/

Search found 3606 matches: lirc

Re: Problem: USB Videograbber doesn't show up

Re: LIRC GPIO driver for homebrew adapter

Re: LIRC GPIO driver for homebrew adapter

Re: lircd with x10 receiver

Re: LIRC GPIO driver for homebrew adapter

Re: Balancing Robot

lircd with x10 receiver

Re: Hauppage Nova-T stick DVB-T

Decoding remote control infrared pulses

Pi crashing every night

Re: LIRC GPIO driver for homebrew adapter

Re: RTSP from a IP camera

Re: D-Link DWA-121 usb wifi not working?

Re: RTSP from a IP camera

Re: LIRC GPIO driver for homebrew adapter

Re: RaspBMC XBMC Mythbox

Re: output webcam directly via hdmi on tv

Re: Webcam - motion not working - but video ok on mplayer

Re: Webcam - motion not working - but video ok on mplayer

Re: raspbmc (debian based) crash on high network load

Re: LIRC GPIO driver for homebrew adapter

Re: LIRC GPIO driver for homebrew adapter

Re: LIRC GPIO driver for homebrew adapter

Re: OpenELEC vs Raspbmc vs Xbian

Re: AV system automation (IR + RS232)