bluetooth speaker

drigg

I can run the following at command line on my pizero to send audio to a bluetooth speaker. pi@raspberrypi:~ $ aplay -D bluealsa:HCI=hci0,DEV=05:ED:A3:8F:F4:1E,PROFILE=a2dp temp.wav ...

timl

Hi, I tried to play an audio track on my Pi via a bluetooth speaker. Codec information as follows ID : 1 Format : AAC LC Format/Info : Advanced Audio Codec Low ...

hnet

What 'Bluetooth managers' do you refer to? What purpose is Bluetooth intended for? What is the ... manager (in Raspbian) and also blueman-manager. I am attempting to connect a wireless speaker to the Pi via Bluetooth. hciconfig -a prints as follows: hci0: Type: Primary Bus: ...

fmarzocca

Hi all,

is there any way to increase TX bluetooth power? I am using Raspi to stream music to a bluetooth speaker, but am experiencing a maximum range of 5-6 meters.

pedalhoundz

... select at the start of the play? Do you or anyone else know how to properly add the routing to the destination? I have the MAC address of my speaker.. I've seen things like mpg321 -a bluealsa:HCI=hci0,DEV=XX:XX:XX:XX:XX:XX,PROFILE=a2dp /usr/share/sounds/alsa/Front_Center.wav but I don't believe ...

pedalhoundz

... screen and is the 'Parent's' pi. One has sensors connected to it and a bluetooth speaker. This is the 'Baby's' Pi The other is just a dedicated camera pi with MotionEyeOS on ...

AverageJim

... don't see anything that would give me a problem, unfortunately. It's a bluetooth speaker. info FC:58:FA:70:71:16 Device FC:58:FA:70:71:16 Name: iChocolate QQ Alias: iChocolate ...

Douglas6

... file is supposed to make BlueALSA the default, so it appears the problem lies there. The contents you included seem to be correct, assuming the Bluetooth device address is correct; triple-check that (mistaking an '8' for a 'B' is common.) Check the file location; for the pi user, that should ...

AverageJim

Obviously, they are paired or the aplay wouldn't have worked.

Thanks,
Jim.

k-pi

Have you 'paired' your devices(?), it won't work if you haven't.

AverageJim

... Rate 16000 Hz, Mono It says it's playing, but it's not playing on the bluetooth speaker. Here is my .asoundrc file: defaults.bluealsa.interface "hci0" defaults.bluealsa.device ...

vasilev

... i read a lot of forums and info about configuring raspberry pi 3 as a bluetooth speaker, but seems that none are working for me. here is some list that i tried: #https://www.instructables.com/id/Turn-your-Raspberry-Pi-into-a-Portable-Bluetooth-A/ ...

tpoint

Dear all, I've been using my pi 3b as an always-on bluetooth speaker for a while now. On the same pi there's also a squeezelite player running which unfortunately ...

glum

... "headless". I'd like to use my RPi to play music over my A2DP-profile Bluetooth speaker. I've come under the impression that there may be some issues associated with using ...

pedalhoundz

Well, back to the original problem of getting VLC player to work through php because I am using a bluetooth speaker as an output and apparently OMXplayer cannot work with blueooth!!

Barrylarry

Hi, Im working on a bluetooth speaker, which receives audio from a smartphone. The point of this project is to process the audio data, with ...

anotherfiz

... capture and playback device - sort of. My configuration is a BM64 bluetooth module connected to the Pi via I2S, with the BM64 acting as a clock ... the Pi to broadcast audio over I2S in the hopes of hearing it on the speaker of the phone I am calling. I am about 90% of the way there insomuch ...

coltenxxx

... touch case. My issue is that I followed a guide online using the pulse bluetooth package to get bluetooth to work on my pi with bluetooth speakers. I had an older Sony stereo with bluetooth that I paired with my pi and it worked ...

Flanz

... portable console using my raspberry pi 3 B+ and want to have integrated speakers and a jack free for when i want to connect headphones i also want the speaker to turn off when i plug in the headphones or i connect bluetooth headphones. How would i go around accomplishing that at a reasonable ...

jmigoliva

Olá, alguém me pode ajudar aqui?
Quero fazer uma campainha de porta, que toque um pequeno mp3.
Tenho um código em python que funciona bem através da saída speaker do pi, mas queria usar o Bluetooth e não estou a conseguir algum som.
Obrigado

fruitoftheloom

Hi! Topic: * Making a 5.1ch audio system with rPi. * Making rPi be a bluetooth receiver speaker system to play music from my phone. Long term goal: Pi auto AKA running AndroidAuto ...

daniel5815

Hi! Topic: * Making a 5.1ch audio system with rPi. * Making rPi be a bluetooth receiver speaker system to play music from my phone. Long term goal: Pi auto AKA running AndroidAuto ...

jmigoliva

I use my pi as simple doorbell. It only has to play a 20 sec mp3 file. It works well on the speaker.
But now I want to use a Bluetooth speaker, it has better sound.
The BT speaker works well with the pi, but not with the python file.
Can anyone help me?

eff0rt

... to get started with something I've wanted to do for a while. A basic Bluetooth speaker-phone that can connect to any Bluetooth capable phone. What's the smallest raspberry ...

Douglas6

Yes. Three years later, omxplayer now has a '-o alsa' option.

Search found 1769 matches: bluetooth speaker

Running command line in python code

AAC on Pi

Re: Bluetooth dongle recognised but doesn't work

ncrease Bluetooth power

Re: PHP, MPG123, and Bluetooth

PHP, MPG123, and Bluetooth

Re: Bluetooth speaker:aplay works, mpg123 doesn't

Re: Bluetooth speaker:aplay works, mpg123 doesn't

Re: Bluetooth speaker:aplay works, mpg123 doesn't

Re: Bluetooth speaker:aplay works, mpg123 doesn't

Bluetooth speaker:aplay works, mpg123 doesn't

RPI3 - as a bluetooth speaker

Adjusting a .py script to react to bluetooth connection

Re: About the Bluetooth a2dp.

Re: VLC player and PHP

Reading real time bluetooth audio data

another I2S thread

Retropi Bluetooth lag issues

How can i have speakers connected and have a jack free when i need to use headphones

Campainha de porta com Bluetooth

Re: 5.1ch audio output? AndroidAuto

5.1ch audio output? AndroidAuto

Bluetooth in a doorbell

bluetooth speakerphone project

Re: Bluetooth speaker not working with omxplayer