bluetooth speaker

stevegal

... I tried ExecStart=/usr/local/libexec/bluetooth/bluetoothd - C and ExecStart=/usr/local/libexec/bluetooth/bluetoothd ... need to make calls from the pi etc, just get audio from the pi to the speaker and record from the mic on the speaker) so no real need for HFP, ...

karrika

... Thanks PhilE. Now I wonder if I should buy a bt speaker to feed out the sound through Bluetooth. Would the pi3-miniuart-bt overlay be fast enough for that? Not that I will use it, ...

Zupit

I have an issue when I successfully connect and send the audio to a Bluetooth speaker. If I go to the speaker icon desktop menu and try to send the audio back again to hdmi ...

fruitoftheloom

... 3 and Raspbian Jessie and have upgrade the distribution and installed bluetooth tools. When I boot up, I get the bluetooth icons and can search and see devices. I have a bluetooth speaker that is paired according to bluetoothctl. Using info on the mac address, it ...

Douglas6

Bluetooth icons? Do you have blueman installed? There have been reports that blueman causes conflicts, you might want to purge that. Also, you didn't mention; the speaker is paired?

bullet2916

... 3 and Raspbian Jessie and have upgrade the distribution and installed bluetooth tools. When I boot up, I get the bluetooth icons and can search and see devices. I have a bluetooth speaker that is paired according to bluetoothctl. Using info on the mac address, it ...

vkpc

Hi,

I am using the latest Raspbian Jessie with 4.4 kernel.

How do i make a previously paired bluetooth speaker automatically connect and selected as audio output
when it comes within range of my Pi3?

Thanks.

excalibas

Same problem here

speaker works fine but I can't get the microphone to work.

flatmax

... project. Will you use a power relay from a GPIO pin to turn the speaker on and off ? If your music use is not primary, you probably don't need to spend a lot on speakers. There are also bluetooth speakers, as well as the wireless types. People have been reporting a ...

stevegal

I've got an EasyAcc-MC (speaker and mic) that I'm trying to connect to so I can stream and receive from the mic ... an Alexa service really!). I've got a fully up to date image so bluez5 I think.. [bluetooth]# version Version 5.23 I can stream using the Audio Sink just fine (A2DP profile ...

jabelone

... but I kind of need it within a few days. I ended up finding an old bluetooth dongle and pairing a portable bluetooth speaker I had. After installing and configuring pulseaudio to use the bluetooth speaker as ...

stevegal

+1 guide to HFP working! I've got the pi3 bluetooth working with my speaker/mic and I can stream ad2p to it, get the button's pressed (playCD, next song and previous song), ...

... repetition. I know that when I first received my pi, setting it up as a Bluetooth speaker was one of the first things I tried. That is, sending audio from my iphone to the pi ...

UglyMike

Me again.... So, I have BT paired with a Sticky Beats BT speaker. That's where I ended up yesterday late. [bluetooth]# paired-devices Device FC:58:FA:79:34:D1 STICKY BEATS It gets connected too: [CHG] Device ...

UglyMike

@spl23 I had indeed blueman installed and have now removed it and added bluetooth taskbar icon (greyed out) @ShiftPlus1 Here is the output of the ... my bluetooth icon has turned blue and that I can pair with my bluetooth speaker. So apparently blueman kinda messed up the upgrade I guess. Ah well, ...

pmap93

... something. Today I'm in the mood and inspired to make a Portable bluetooth speaker. Where the Pi can act as an BT audio receiver paired on a phone, ALSO the song title ...

Douglas6

See edit.

jivex5k

If you can't recognize the adapter, running the bluetoothd will have no effect. Do you have USB adapter? Yep, USB adapter is seen. Would like to utilize the onboard one though. EDIT- Seems to be working, just scanned and it found the speakers. I'm going to see if I can get this working like I did w...

Douglas6

If you can't recognize the adapter, running the bluetoothd will have no effect. Do you have a USB adapter? You could install pi-bluetooth, and then adjust /etc/systemd /system/dbus-org.bluez.service to load the BlueZ 4 bluetoothd.

jivex5k

... bluez-firmware to get the onboard adapter recognized? Says it's already installed. Even removed and reinstalled it, no luck. Also looked at pi-bluetooth and bluetooth, they would install bluez 5 though. Can't enable the service to auto start, it's because my init script is for bluez 5, going ...

Douglas6

You could try just installing bluez-firmware to get the onboard adapter recognized?

jivex5k

... using this guide: https://learn.adafruit.com/install-bluez-on-the-raspberry-pi/installation It's a start at least. hcitool is not showing the bluetooth adapter though, might not have the driver for the onboard bluetooth or maybe just not fully configured yet. Going to do a fresh install of ...

Tiqni

Hello,

Did anyone managed to connect Bluetooth headset (speaker and microphone) to Raspberry Pi 3?

I tried many SW but I can only have the speaker part, no SW support for Bluetooth microphone.

Thanks in advance.

de_dieter

Hey,

i got a Bluetooth Speaker/Headset connected to my RaspberryPi 3.

i got it connected and trusted and autoconnect on Startup. But i want to reconnect after the Speaker/Headset loses Connection to it. Does anyone know how i can do it?

jivex5k

You can compile and build BlueZ 4 under Jessie (takes less than an hour on the Pi; I wouldn't bother cross-compiling). I personally doubt it will help. I just tested on my Android phone, and it also allows just one A2DP connection at a time. Oh duh... I was so used to cross compiling I hadn't consi...

Search found 1769 matches: bluetooth speaker

Re: Bluetooth - Headset/Handsfree

Re: Overlay to remap Pi 3 UART

Audio redirecting issue after successful BT connection

Re: Bluetooth on Raspberry Pi

Re: Bluetooth on Raspberry Pi

Bluetooth on Raspberry Pi

How to make bluetooth speaker persistent

Re: Bluetooth headset (speaker/microphone)

Re: Switch on/off speakers (creating ambients with lights)

Bluetooth - Headset/Handsfree

Re: Raspberry Pi 2 Distorted Audio

Re: Raspberry Pi 3 BT audio issue

Re: Raspberry Pi 3 BT audio issue

Re: Bluetooth not working after update - information needed!

Re: Bluetooth not working after update - information needed!

Bluetooth AVRCP Song Title and Tags, displayed on 16x2 LCD?

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Re: RPi 3 can't connect more than 1 speaker with bluetooth.

Bluetooth headset (speaker/microphone)

Bluetooth - reconnect after lost connection

Re: RPi 3 can't connect more than 1 speaker with bluetooth.