auvidea

tiffo

Hi guys, I have just bought a B101 Rev3.0 from Auvidea. I am currently using a RPi3 with Jessie 4.9.13 (everything up to date). In the User Manual I read the B101 rev 3.0 must be reset through the RESET pin and that is what I am doing every time ...

kerifis

you may need extra hardware for encoding see ( https://auvidea.com/?s=RTMP+video+streaming )

6by9

Could anyone tell me if the same sort of thing would be possible using the Auvidea HDMI to CSI bridge (https://auvidea.com/b101-hdmi-to-csi-2-bridge-15-pin-fpc/)? I have a fixed 1080p60 source that I'm trying to input into the RasPi 3. I'm not concerned with ...

schwami7488

Could anyone tell me if the same sort of thing would be possible using the Auvidea HDMI to CSI bridge (https://auvidea.com/b101-hdmi-to-csi-2-bridge-15-pin-fpc/)? I have a fixed 1080p60 source that I'm trying to input into the RasPi 3. I'm not concerned with ...

6by9

... until ctrl+c. -o Output filename, default is 'test_encode.h264'. -n No output file saved. -h Help The B101/B102 boards are sold by a third party (Auvidea). There is no official support from Raspberry Pi for this board, this is all an ongoing project by volunteers (although some bits may fall under ...

curiouscat

... in play here the Toshiba TC358743 and the Analog Devices ADV7280-M chip. I see there are two providers for adapter/bridges that I can find so far: Auvidea B101 HDMI to CSI-2 bridge (Germany) input: HDMI output: 1080p software: raspivid PiCapture SD1 (Florida) input: standard-definition interlaced ...

6by9

Whilst Pi Towers haven't made the HDMI to CSI2 chip into a product, others have - http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b101 Whilst the firmware does work with it, the code was written for a demo only and has limitations. https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=120702 ...

auvidea

This is Jurgen from Auvidea. Sorry for the late reply on this issue. 1080p30 was a mis-print. The B101 only supports 1080p25. We do have a new product (the Auvidea V20), which is FPGA based and can emulate the PI camera. This product ...

6by9

... register writes to tell the TC358743 chip to use all 4 lanes. Right now, using the latest kernel on Raspbian, if I plug in a camcorder into the Auvidea B102 board hooked up to the CAM1 interface and run raspivid, the top half of the image is all weird and diagonal, and the bottom half is all ...

bko

... GPU driver you have no control over how any lanes to use."? Right now, using the latest kernel on Raspbian, if I plug in a camcorder into the Auvidea B102 board hooked up to the CAM1 interface and run raspivid, the top half of the image is all weird and diagonal, and the bottom half is all ...

fruitoftheloom

john7 wrote:I see. Thank you.

€70.00 is linked in the post I linked to:

http://auvidea.eu/index.php/theme-style ... 32-06/b101

fruitoftheloom

I'm thinking about getting the B102 board from Auvidea to test with the Pi Compute Module. They have mentioned that no testing has been done on this yet, but they have confirmed it working with their J120 carrier board + NVIDIA Jetson TX1 compute ...

bko

I'm thinking about getting the B102 board from Auvidea to test with the Pi Compute Module. They have mentioned that no testing has been done on this yet, but they have confirmed it working with their J120 carrier board + NVIDIA Jetson TX1 compute ...

jmastel

... a problem that has to be solved on a case by case basis. Thanks for your reply, I was referring to the B101 HDMI to CSI-2 Bridge here http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b101 . It looks like that link you attached had what I was looking for, I just wanted confirmation ...

6by9

... and pint pot. There is a half option to use the camera interface. https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=120702 / http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b101 (only about twice the cost of the Pi). Two major points to note: - the software is still ...

chaitu

That ic has already been covered as it is the same one that the foundation used for their prototype hdmi input board, and is the same that auvidea have used in their equivalent board (has no driver support from them on the Pi). With the csi2 peripheral driver, if you have configured the ic ...

6by9

Searching is such a boring concept!
search.php?keywords=auvidea 71 hits.

viewtopic.php?f=38&t=120702&p=916168 is the main thread discussing it.
Not officially supported as yet.

6by9

... and https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=120702 Please ignore references to driving the Auvidea TC358743 HDMI input board. Support was added to the GPU firmware for a demo using that specific chip - that is currently not open source. Ongoing ...

fruitoftheloom

... because the driver is built into the GPU. So, is there really no way to use the Raspberry Pi compute module with other CSI/DSI peripherals? Auvidea have attempted to create a HDMi Capture Input Product and is discussed here: https://www.raspberrypi.org/forums/viewtopic.php?t=120702&p=815961

fruitoftheloom

HDMi input ? http://www.auvidea.eu/index.php/theme-s ... 32-06/b101

viewtopic.php?t=120702&p=815961

fruitoftheloom

A htmi to CSI module already exists http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b100-hdmi-to-csi-2-bridge There's a revised version of that, the B101, which plugs straight into the Pi's 15 way, 1mm pitch FPC, doesn't require ...

gregeric

A htmi to CSI module already exists http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b100-hdmi-to-csi-2-bridge There's a revised version of that, the B101, which plugs straight into the Pi's 15 way, 1mm pitch FPC, doesn't require ...

rpdom

A htmi to CSI module already exists http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b100-hdmi-to-csi-2-bridge All Raspberry Pi models are not supported (yet) software wise, as the CSI-2 interface of the Raspberry Pi models has not ...

richardcgiroux

A htmi to CSI module already exists

http://www.auvidea.eu/index.php/theme-s ... i-2-bridge

fruitoftheloom

... seems like a waste. Is there any place that sells only the hdmi to ffc (for cheaper than 10 pound)? because I wasn't able to find one. http://www.auvidea.eu/index.php/theme-styles/2014-12-30-22-32-06/b101 http://www.auvidea.eu/index.php/theme-styles/2013-06-22-21-23-34/raspberry-pi-hdmi-in https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=120702

Search found 399 matches: auvidea

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

Re: How do I live stream RTMP audio/video to YouTube

Re: High definition video capture using PiCapture HD1

Re: High definition video capture using PiCapture HD1

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

Re: Composite video input using camera interface

Re: B101 CSI-2 input from PS4 and image processing

Re: HDMI to CSI adapter board

Re: HDMI to CSI adapter board

Re: HDMI signal processing

Re: HDMI to CSI adapter board

Re: HDMI to CSI adapter board

Re: Raw sensor access / CSI-2 receiver peripheral

Re: Multimedia broadcast from an HDMI stream

Re: I2S/USB Audio input

Re: Receive HDMI AV and stream from Raspberry Pi 3

Re: Can MIPI be used with non-official peripherals?

Re: Can MIPI be used with non-official peripherals?

Re: crazy idea: Using the Pi0 as a video decoder.

Re: Raspberry PI as HDMI receiver

Re: Raspberry PI as HDMI receiver

Re: Raspberry PI as HDMI receiver

Re: Raspberry PI as HDMI receiver

Re: HDMI board