HifiBerry

DougieLawson

The Wolfson card WON'T WORK on a Raspberry Pi A+ or B+. The P5 header is removed on the A+/B+.

Take a look at the HiFiBerry or USB sound devices.

0x1b is claimed by the tas5713 driver, as used by the hifiberry-amp card. 0x3b is the wm8804 used by the hifiberry-digi.

Once DT is working, those entries will go away.

... don't support HAT identifcation you can manually choose the device tree overlay. You can see the currently supported overlays in /boot/overlays: hifiberry-dac-overlay.dtb hifiberry-dacplus-overlay.dtb hifiberry-digi-overlay.dtb iqaudio-dac-overlay.dtb iqaudio-dacplus-overlay.dtb You can manually ...

FM81

IQaudio Pi-DAC+ - hab noch das HifiBerry DACplus und die Wolfson Audio Card gefunden, wobei Wolfson wohl softwareseitig nicht so kompatibel sein und IQaudio den besseren Klang haben soll Da hast Du Dir schon die besten in dieser Preislage ...

shiftux

Hey, My system: 2 RPis running piCorePlayer v1.18b | linux 3.16.3-piCore+ one with a USB DAC and one with the hifiberry Digi+, one over wifi, one over ethernet LMS running on my Win7 machine After installing piCore on the RPis, I first used the analog audio, got everything working ...

Luisiroth

He vuelto! XD Al final he conseguido tener 5.1 en OSMC comprando esta tarjeta de sonido: http://www.hifiberry.com/ En la propia web explican como soldarla e instalarla, no es nada del otro mundo. Y os puedo asegurar que funciona. Además puede convivir con Lightberry instalando ...

DirkS

I know this is a bit late to this thread, but I feel this is a perfect fit solution Add digital audio out directly via a module: http://www.hifiberry.com/hbdigi Yep 25 months, necro thread of the week :roll: Not sure about that. I thought I saw one from May 2012 resurrected earlier this week ...

fruitoftheloom

TotalWipeOut wrote:I know this is a bit late to this thread, but I feel this is a perfect fit solution

Add digital audio out directly via a module: http://www.hifiberry.com/hbdigi

Yep 25 months, necro thread of the week

TotalWipeOut

I know this is a bit late to this thread, but I feel this is a perfect fit solution

Add digital audio out directly via a module: http://www.hifiberry.com/hbdigi

hagensieker

Did my best to document the steps I did to make my PiB+ and HiFiBerry DAC+ a logitechmediaserver and tidy up the installation a bit. Hope someone finds it helpful.

http://www.hagensieker.com/styled-39/index.html

FM81

... special tweaks or not with all kinds of media-center-distributions or ... Anything cheap that can give me a optical audio out from my raspberry ? Hifiberry Digi + or Hifiberry Digi ; depending on which RPi-model you have. MfG, FM_81

fremder

... dummen Fragen). Woher weiß ich, ob ich folgende Erweiterungen / Boards zusammen an einem Pi betreiben kann? IQaudio Pi-DAC+ - hab noch das HifiBerry DACplus und die Wolfson Audio Card gefunden, wobei Wolfson wohl softwareseitig nicht so kompatibel sein und IQaudio den besseren Klang haben ...

Richard-TX

I think Adafruit has a version that is run from a mcp23008. The mcp23008 is 1/2 of a mcp23017 so either will work.

Ranho

No, that is the HAT directly from hifiberry, as is the quote. Why it uses it? That I don't know.

I did find a guide that hopefully will help me: http://www.hifiberry.com/forums/topic/s ... liteslave/

This guy changed the lcd gpio configuration, so it can be done

FM81

May be, you are mixing something? I2S and I2C are two different kinds of a data-bus! I2S is for sound only and can be described as "something special". But I2C is usable for several devices like LCD, sensors, data-extenders, EEPROMs; all on the same data-lines, every device gets here its own address...

sjari

... with HDMI output? I have FLAC 192kHz/24 bit files, how the output will be from the HDMI? is it going to be same as the digital output from the HiFiBerry Digi/Digi+ ? i'm talking about a fully digital output to my audio setup! Thanks

Ranho

As I searched through the internet I realized that the LCD use some GPIO as the Hifiberry digi+. here is the HAT configuration for Hifiberry: # GPIO FUNCTION PULL # —- ——– —- setgpio 2 ALT0 UP # I2C communication DAC chip setgpio 3 ALT0 UP # I2C communication DAC ...

Ranho

... change those pins and you can't use them for reading analog data. If you absolutely need those two pins, use SPI (see next section) , that the hifiberry uses but says it can share. The SPI its free, but I just can't find or understand where I need to fit the other wires, or better said the ...

FM81

I think, it is not possible to share it? But may be someone knows ... I assume those hifiberrys use all the I2S-bus? I know this only about the 1st model with analog audio out. I use this also with the old raspberry, which has a separate connector P5 for I2S-bus, so no conflicts here. I2S-pins on th...

Ranho

This is almost a dialog, but from what I can see, and really don't understand because I already saw projects with the hifiberry and a lcd, is that both interfaces use GPIO18... is it possible to share it?

FM81

... which way you prefer. But it seems a better (and cleaner) solution to make it in this way. (I would sold an male header on the inner pins of the hifiberry-board, but feel free to do what ever you want!) :) MfG, FM_81

Ranho

Thank you, that's reassuring! I was checking and the Digi+ has GPIO holes on the board http://www.kiwi-electronics.eu/image/cache/data/products/raspberry-pi/addon-boards/RPI-HB+DIGI-2-800x533.jpg if I use these wires http://www.adafruit.com/products/759 can I connect the Digi+ and a LCD? Or do I nee...

FM81

A very stupid question, but can you shutdown the system with volumio or runeaudio? Yes, there is a software-button in the graphical userinterface. But means also that you'll need a second computer (or smartphone or what ever) to perform this. Of course, for a real hardware-shutdown-solution (like m...

Ranho

Should I just do something like this: https://www.youtube.com/watch?v=lXElSSsFNcM

In the hifiberry site they don't sell the DIGI without the soldering, just the DAC, because they say is more delicate or something.

Ranho

... but instead having a LCD screen that shows what's playing. I already saw a few projects with this, but none explained how to add the LCD and the hifiberry at the same time, like using cables, or de-soldering... if there is some video or tutorial even if for something unrelated I would like to ...

Search found 1591 matches: HifiBerry

Re: USB Audio -> STEREO <- LINE or MIC IN

Re: New device tree kernel is in testing

New device tree kernel is in testing

Re: Mehrere Erweitungsboards gleichzeitig möglich?

Re: piCorePlayer a dedicated microcore and squeezelite playe

Re: Sonido 5.1 en OSMC?

Re: HDMI to Toslink or Coax Digital Audio

Re: HDMI to Toslink or Coax Digital Audio

Re: HDMI to Toslink or Coax Digital Audio

Arch Instructions for HiFiBerry Dac+ on Pi+

Re: Having beeping and clicking sound out of the USB DAC

[GELÖST] Mehrere Erweitungsboards gleichzeitig möglich?

Re: RPi B+ LCD + HIFIBERRY

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Max Audio Quality through HDMI?

RPi B+ LCD + HIFIBERRY

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server

Re: RPi + Hifiberry as a music server