... and 67 which defined the PXELinux file and the IPaddress of the TFTP server. Once you have this setup right, ... server-name "Infrastructure.<your domain name>.org"; fixed-address 192.168.1.9; } host Pi32 { hardware ethernet ...
... Bonjour services the name resolution to IPaddress is simply raspbmc.local (say) i.e. you just add ... static IPs, can use DHCP and get to systems via the fixed hostname.
... and i use 3g routers - the ones with expensive fixedip sim cards. the 3g router is port forwarded to 1024 ( ... the cctv server is located on 192.168.0.2 i put the ipaddress which comes with the fixedip sim card in my browser ...
... inside it ,, doesnt have a public available ipaddress,, instead it only has a really natted non accessable public ip i could buy a fixed static ip sim card - but they are expensive and come with ...
... in your router "HTTP Server" (port 80) to IPaddress of your RPi, or to RPi as a name on your network. ... is usually 192.168.1.254 In this case I would assign fixedIPaddress for your RPi. You can do it either in your ...
... only emails me on reboot and poweroff. I really want it to email me its IPaddress when it turns on or comes back up. Here's my attempt. #!/usr/bin/python # The idea ...
... use of short preamble preamble=1 # Station MAC address -based authentication # Please note that ... for MAC addresses, and accounting # The own IPaddress of the access point (used as NAS-IP-Address) ... # These parameters can be used to configure a fixed NFC password token for the # AP. This ...
... the other only with squeezelite. I use fixedaddress 127.0.0.1 in those with LMS, the address of the ... & does. Strange. Tom Did you try the real IP instead of 127.0.0.1 ?
... only emails me on reboot and poweroff. I really want it to email me its IPaddress when it turns on or comes back up. Here's my attempt. #!/usr/bin/python # The idea ...
... only emails me on reboot and poweroff. I really want it to email me its IPaddress when it turns on or comes back up. Here's my attempt. #!/usr/bin/python # The idea ...
... only emails me on reboot and poweroff. I really want it to email me its IPaddress when it turns on or comes back up. Here's my attempt. #!/usr/bin/python # The idea ...
... working on a way to do this where your only equipment is a laptop with putty loaded, a RPI, an ... fixed+ip+address#p259832 get back if you are still stuck. ;) sorry ...
... of your home network if you know what your IPaddress is (i.e. as seen from the internet) and if you forward ... DHCP so its best to configure the Raspberry Pi with a fixedIPaddress. Once you know your IPaddress and have ...
... says that the pi should connect and acquire an ipaddress, however i only get "interface wlan0 already configured" ... scanning and then remains like that permanently also i fixed my afore mentioned problem with multiple old network ...
... it headless # (i.e. without a monitor/TV), you need to know what the IPaddress is to SSH into it. # # This script emails you the IPaddress if it detects an ethernet ...
It can be done, but you'd need to configure the IPaddress of the Pi and the Windows machine manually first. ... to the connections and configure the IPaddress to be fixed to something like 192.168.1.4 and subnet mask 255.255.255.0 ...
... the PI directly via cat5 cable it loses it's IPaddress (can't link screen shot as this means I don't have ... somewhere it is possible to tell the RPI to assume a fixedIP no matter what it is connected to. ...or i there ...
... it's going on is his DHCP trying to push the address to the PI. after more or less a minute the ... from it. it does this even if i set up a fixedip for the "raspberrypi" device. if i try to ping my router ...
I had this same issue. I just fixed it. I ended up giving my RPi a static IP. This required several steps: Determining your IPAddress 1.Run LXTerminal from the desktop 2.Type # ifconfig eth0 3.Review ...
... lead me to the idea that I could try a static IP for the Pi. I also saw same dhcpcd error messages ... However, after assigning a static IPaddress, everything seems to work as it should now. ... about this behaviour. Though my problem is fixed, I'd still love to know why it occurred in ...