2560x1440

DAve Shillito

... fine as a "laptop". However when I get home if I use RealVNC to connect from my desktop, it feels quite cramped working in a 1366×768 window on a 2560x1440 display. But if I change the resolution to 1920x1080 in Raspberry Pi Configuration it seems to try to keep these settings when I next connect ...

DidaJI

After rpi-update Jessie (monday) me stopped working HDMI resolution 2560x1440 at 60 Hz. I use this one settings in config.txt: disable_overscan=1 init_emmc_clock=100000000 framebuffer_swap=0 hdmi_group=2 hdmi_mode=87 hdmi_cvt=2560 1440 60 3 0 0 1 max_framebuffer_width=2560 ...

vzex

... The output from tvservice sort of implies that the EDID is correct (I think). You will need to set hdmi_pixel_freq_limit in config.txt to avoid 2560x1440 being ignored due to being out of spec. yes, the screen works well with pc,and when i parse the edid file, the result shows something like ...

6by9

... The output from tvservice sort of implies that the EDID is correct (I think). You will need to set hdmi_pixel_freq_limit in config.txt to avoid 2560x1440 being ignored due to being out of spec.

aBUGSworstnightmare

... data sheet? Guessing around?? One question: this is a display coming from a mobile phone, isn't it? So your resolution should be 1440x2560 and not 2560x1440 So turn it to hdmi_timings=1440 0 16 2 16 2560 0 16 11 16 0 0 0 24 0 88473600 3 and try this

6by9

Maximum specified resolution is 1920x1080 @ 60Hz, so 2560x1440 @ 50Hz is almost 50% more pixels being processed a second and likely to fail (the composition hardware block is unlikely to be able to retrieve all the pixels from SDRAM in realtime, and ...

vzex

... framebuffer_width=2560 framebuffer_height=1440 and the tvservice -s is : tvservice -s state 0x120006 [DVI DMT (87) RGB full 16:9], 2560x1440 @ 50.00Hz, progressive tvservice -m DMT Group DMT has 20 modes: mode 4: 640x480 @ 60Hz 4:3, clock:25MHz progressive mode 5: 640x480 @ 72Hz ...

Fluks

... i found on the net. it works but im sure the script could be simplified, here is what the script does first it crops the 2688x1520 picture to 2560x1440 pixel 2. it adds a black bar at the top and displays my homepage to the top left and the date to top right 3. it adds 3 little logos under ...

pingpong2012

... you on start-up that it is out of date, but works (it's insecure according to the developer). Hi, I have a 6 inch display with a resolution of 2560x1440 and mini-HDMI input. I've tried many different settings on config.txt but I just can't get any image. The Raspberry PI shouldn't support 2560x1440. ...

Gerd

zombie11 wrote:Hi, I'm also trying to have a resolution of 2560x1440 but without success.
Any of you had success?
Thanks.

See this thread for mor info, especially the posts by dom. viewtopic.php?f=38&t=79330

zombie11

Hi, I'm also trying to have a resolution of 2560x1440 but without success.
Any of you had success?

Thanks.

zombie11

Hi, I have a 6 inch display with a resolution of 2560x1440 and mini-HDMI input.

I've tried many different settings on config.txt but I just can't get any image.
Even tried with Arch linux and Raspbian Jessie Desktop and Lite.

Anyone has a solution for me?

Thanks in advance.

stderr

2. Performance-wise, will a Pi2b be able to access a host running at 2560x1440 over gigabit? (If so, would it be as responsive as it is when accessed from a Windows VNC client?) Note that the pi is 100meg and not gig ethernet. So if that works well as you ...

Doc. Caliban

... - Run vncviewer from the terminal to launch the GUI. I'm currently running on a 1080 display and telling VNC to scale the iMac's 2560x1440 display to my monitor. It looks great and works smoothly. I'm happy with how this turned out. Now I don't have to fire up the power-hungry ...

Doc. Caliban

... bare metal, so if one distro or another is better for this, please advise.) 2. Performance-wise, will a Pi2b be able to access a host running at 2560x1440 over gigabit? (If so, would it be as responsive as it is when accessed from a Windows VNC client?) Thank you, -Doc

blackketter

I'm specifically looking to drive a 2560x1440 display at any frequency. Would 2560x1600 be close enough for you? That's been available for a loooooooong time... http://elinux.org/RPiconfig#Video_mode_options Thanks! I'll have to try it. It's ...

GTR2Fan

blackketter wrote:I'm specifically looking to drive a 2560x1440 display at any frequency.

Would 2560x1600 be close enough for you? That's been available for a loooooooong time...

http://elinux.org/RPiconfig#Video_mode_options

blackketter

Time to resurrect this thread...

Has the resolution limit been changed in Raspberry Pi 3?

I'm specifically looking to drive a 2560x1440 display at any frequency.

iamhowardroark

Hello, I have the following: Monitor: http://www.amazon.com/Monoprice-IPS-ZERO-G-Monitor-2560x1440-110509/dp/B00DIGC6GO/ref=cm_cr_pr_product_top?ie=UTF8 Cable: http://www.amazon.com/gp/product/B00L4LBCSS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00 Rasberry PI: ...

lionking

... 4.9.2-10) Input #0, image2, from './image_%02d.jpg': Duration: 00:00:01.64, start: 0.000000, bitrate: N/A Stream #0.0: Video: mjpeg, yuvj420p, 2560x1440 [PAR 1:1 DAR 16:9], 25 tbn File 'timelapse.mp4' already exists. Overwrite ? [y/N] y [libx264 @ 0x1035da0] using SAR=1/1 [libx264 @ 0x1035da0] ...

lionking

... Input #0, image2, from '/home/pi/test/image_%02d.jpg': Duration: 00:00:01.64, start: 0.000000, bitrate: N/A Stream #0.0: Video: mjpeg, yuvj420p, 2560x1440 [PAR 1:1 DAR 16:9], 25 tbn File 'timelapse.mp4' already exists. Overwrite ? [y/N] y [libx264 @ 0x8c4fc0] using SAR=1/1 [libx264 @ 0x8c4fc0] ...

sinndorfer

Hello Cracks, is it possible to connect any Display with DSI / MIPI with 2Ch (4Lanes) to the PI? In special I search for a Display with 2K (2560x1440) and would not use the HMDI. It´s a project for a Goggle, means a Head-Display for Flightmodels. Someone told me it´s to complicate. Need to program ...

FlashT

Up to 2560x1600, but 2560x1440 is not listed at all... so it may be not so simple...

I would like to buy a 6'' HDMI display that has 2560x1440, it won't be cheap, so I need to know for sure if it's supported or not.

FlashT

Does rapberry support 1440p resolution (2560x1440)? Could not find any reliable information about that...

Best regards,
FlashT

ric96

... many application that use the pi's hardware decoder/encoder are limited to 1080p. Is this the same with mencoder or can i go above 1920x180, say 2560x1440?

Search found 179 matches: 2560x1440

Remote VNC resolution (cake and eat it)

After upgrade I have problem with 2560x1440x60hz resolution

Re: Problem with 2k hdmi output(half screen blank)

Re: Problem with 2k hdmi output(half screen blank)

Re: Problem with 2k hdmi output(half screen blank)

Re: Problem with 2k hdmi output(half screen blank)

Problem with 2k hdmi output(half screen blank)

help me simplify my imagemagick script

Re: Setting up HDMI output when video output isn't what you

Re: Max resolution?

Re: Max resolution?

Re: Setting up HDMI output when video output isn't what you

Re: Using a Pi as a VNC Client

Re: Using a Pi as a VNC Client

Using a Pi as a VNC Client

Re: Max resolution?

Re: Max resolution?

Re: Max resolution?

Help W/ 2560x1440 Display on Rasberry Pi

Re: Trouble with avconv on model B

Trouble with avconv on model B

6" 2K Display fit to PI by MIPI-DSI 2ch(4lanes)

Re: 1440p resolution support

1440p resolution support

mencoder resolution limit?