Raspberry Pi Forums

Bosse_B

Thanks!
I did not receive an email alert on the replies so I thought my question went unnoticed....
Strange forum that defaults to no alert on replies....
Have to remember to tick the checkbox every time.

Bosse_B

I have a small Realtec WiFi dongle that I want to test with my new Pi B+. I followed this guide regarding the general handling. The adapter shows up when I do the dmesg command as follows: [106831.059863] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [106831.161539] usb 1-1.5: New USB ...

Bosse_B

The link above to the tutorial is broken....

Bosse_B

I am following this HowTo in order to set up a new B+ for WiFi connection. I am going to use the adapter recommended in the HowTo. But I have a question regarding editing the configuration file: sudo nano /etc/network/interfaces In the HowTo is shown the initial content and then it describes how to ...

Bosse_B

... http://www.adafruit.com/products/185 ... http://www.adafruit.com/products/1852 Yeah, I wondered about the broken link.... Anyway, the gadget does its thing the wrong way around: - It attaches to the power supply and measures its output voltage and current draw But in actual fact what is needed ...

Bosse_B

I am used to check the incoming voltage on the Pi to see if there is a problem with the supply. On the Model B there were test points that could be used for this, but I cannot find any on my newly bought B+. So how can you check what is actually delivered to the Pi after the supply drop because of l...

Bosse_B

Thanks! This worked just fine on my Pi back home. :D I did this, all via VPN and PuTTY: sudo apt-get install ffmpeg Then I cd'ed to the target directory on my mounted NAS Used the PP Webapp page to create the long ffmpeg command line Started a screen on the Pi so loss of connectivity from me would n...

Bosse_B

I have a couple of Pi units sitting on my home LAN, one RASPBMC with XBMC as primary application and one RASPBIAN with the primary task of providing VPN access to my LAN. Over the summer, when I am not at home, I use VPN to access my network and the resources there and it works just fine. I can use ...

Bosse_B

I would like to read the data from a couple of wireless devices using the 433 MHz system with my Pi. One example is OREGON temperature and humidity sensors, which transmit on the 433.92 MHz frequency. I was thinking I can use one of these modules from China. Has someone an example (with code) on how...

Bosse_B

I visited my son-in-law today and together we solved the problem... This is the working mount command we were able to use: sudo mount.cifs //nas/data/bosse /mnt/cifs -o username=****,password=****,rw,file_mode=0777,dir_mode=0777,noperm noperm means that the client (the Pi does not check or impose pe...

Bosse_B

pi@raspbian-pi ~ $ sudo umount /mnt/cifs pi@raspbian-pi ~ $ sudo mount.cifs //nas/data/bosse /mnt/cifs -o username=****,password=*****,rw,file_mode=0755,dir_mode=0755 pi@raspbian-pi ~ $ cd /mnt/cifs pi@raspbian-pi /mnt/cifs $ ls -l total 8935 -rwxrwxrwx 1 1026 users 286719 Mar 21 2012 Android Sms N...

Bosse_B

pi@raspbian-pi ~ $ sudo mount.cifs //nas/data/bosse /mnt/cifs -o username=****,password=*****,domain=*****,rw,file_mode=0755,dir_mode=0755 pi@raspbian-pi ~ $ cd /mnt/cifs pi@raspbian-pi /mnt/cifs $ touch korvkiosk2 touch: cannot touch `korvkiosk2': Permission denied pi@raspbian-pi /mnt/cifs $ ls -l...

Bosse_B

Thanks, but this is gooblediboo for me.... Scrolling down a ton of options I do not understand I get to this, which does not tell me what I need to do in a way that makes me able to do it... FILE AND DIRECTORY OWNERSHIP AND PERMISSIONS The core CIFS protocol does not provide unix ownership informati...

Bosse_B

What is the command to retrieve the UMASK value?
I tried as follows:

Code: Select all

pi@raspbian-pi ~ $ UMASK
-bash: UMASK: command not found

As you can see there is no reaction....

Bosse_B

It seems like my attempts work partially, after all I CAN list the files and presumably also read them. It is just that all access for me is read only. No, wait! All existing files in the share are -rwxrwxrwx and I can access them just fine. So I must be logged on fine, really. But whatever file I w...

Bosse_B

Did not work. Same permission problem. Note: My NAS does not have the guest account enabled, only authenticated users are allowed access. But the user registration I thought was taken care of with the original command by entering the credentials on the command line: mount.cifs //nas/data/user /mnt/c...

Bosse_B

I do not think that will work, but what actually did work was to escape the offending characters with \ like so: $ wget http://companydomain/somepath/2014$CI$/21.2.4.4/thefile However, I did not have success this time either even though wget got a bit further. It seems like my mount of the NAS sha...

Bosse_B

I had already tried to follow the link about CIFS mounting, But this is what happened (I have replaced sensitive info with ****): pi@raspbian-pi ~ $ mount.cifs //192.168.0.138/data/bosse /mnt/cifs -o username=user,password=*****,domain=***** Couldn't chdir to /mnt/cifs: No such file or directory pi@...

Bosse_B

Thanks, the Synology NAS exports a couple of directories using Samba (Windows sharing) so on my Windows machines I just go to \\NAS\data\somedir and "it just works". I would ideally like to be able to access this from the Pi as well (R/W). When reading the second link I was a bit confused so I will ...

Bosse_B

I have two Pi:s running on my home network: 1) RASPBMC with XBMC, uses my Synology NAS as source of videos. Hooked to my Sony TV. 2) RASPBIAN currently used only for VPN connectivity to my network (OpenVPN and PPTP servers running). Headless. Now I would like to know if I can download files via the ...

Bosse_B

Thanks,
then I understand.
It is not as if my printer is brand new either...
The CP1215 has been around a great many years, so I guess that it has ample support in CUPS 1.5.3 once I get it to be recognized by the Pi as a USB device...

Bosse_B

One strange thing:
When I go to the CUPS.ORG website they state the latest CUPS is version 1.7.3 but what I received through the apt-get command was 1.5.3, a far cry from the bleeding edge...
Why is this so?
Is there a command on my Pi to update to a more recent version of CUPS??

Bosse_B

OK, the printer was connected to a powered hub from my Win7 PC and I pulled the cable off of it and inserted into the Pi instead. I thought that a printer would not pull power from USB since it is mains connected itself and consequently it would be safe to just run it to the Pi... Anyway I was on a ...

Bosse_B

That is also my deduction. The question really is HOW do I fix the Pi such that it will recognize the printer? I thought that installing CUPS would bring along all what is needed to identify printers, but maybe there is some deeper thing to also enable/install on RASPBIAN in order for it to discover...

Bosse_B

The response is this: pi@raspbian-pi ~ $ sudo lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. THe printer cable is the single thing attached to the USB conne...

Search found 966 matches

Re: Pi B+ - where are the voltage testpoints?

How to connect WEP WiFi network?

Re: Dynamic DNS with the Pi

WiFi connection to the Pi, question on configuration

Re: Can the raspberry pi b+ handle 5.35V and 2.0A

Pi B+ - where are the voltage testpoints?

Re: Can I run Pirateplayer on a RasPi?

Can I run Pirateplayer on a RasPi?

How to interface 433 MHz devices?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Re: Using wget targeting a NAS unit?

Using wget targeting a NAS unit?

Re: Can the Pi act as a print server for HP Laserjet CP1215

Re: Can the Pi act as a print server for HP Laserjet CP1215

Re: Can the Pi act as a print server for HP Laserjet CP1215

Re: Can the Pi act as a print server for HP Laserjet CP1215

Re: Can the Pi act as a print server for HP Laserjet CP1215