Yes it seems that the cards have come to the end of their read/write life, though some are "branded" I would not bet that are not cheap imitations. Another issue I have found that different devices seems to format them differently, so I would surmise it could be that not all manufacturers of devices...

Recently bought a 512MB Model B, had previously had a 256MB, and as have several SD Cards went about using them. These cards have been used previously in several devices, Cameras, Tablet, Laptops, Android TV Sticks etc and in Linux used Parted to re-create partition table and format them FAT32. Firs...

Best to do a forum search first as many posts relating to 8188eu....

http://www.raspberrypi.org/phpBB3/searc ... rds=8188eu

Did you see very recent this posting ?

http://www.raspberrypi.org/phpBB3/viewt ... lit=8188eu

http://elinux.org/RPi_Powered_USB_Hubs Belkin Hi-Speed USB 2.0 4-Port Hub F5U234 USB 2.0 4-Port 5 V - 500 mA per Port Verified No backfeed, can power the RPi. Comes with a 2.4 A power supply. The user manual [1] says “Per Port Current Self-Powered Mode: 500mA (max)”. However, I've attached a HD that...

I prefer to install software and test than read peoples issues, which may or may not be correct, the WWW is full of opinions. HPLIP software is included in the Raspbian Wheezy and Arch Linux Arm repositories and therefore the software has been compiled to be compatible. I have an HP Deskjet 3050A Al...

Checking the http://www.openprinting.org/printers website seems it is not Linux friendly, and Canon do not appear to realise Linux exists...

Belkin Hi-Speed USB 2.0 4-Port Hub F5U234 Revision 3 2.6A Power Supply Following this thread I bought one of these and found it stable and one less power brick as was suggested powered the Pi from the hub: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=55990&hilit=F5U234 http://elinux.org/RP...

I believe the Printer Driver you are trying to install was compiled for the x86 architecture, not the ARM HF Architecture Have you installed the CUPS ""armv6 extra cups 1.7.0-1 The CUPS Printing System"" package and see if it is recognised natively ? Though checking the Canon website I could not fin...

AFAIAA the majority of current HP ePrinters are supported by the HPLIP Software / Sane which is available from the Raspbian Wheezy Repositories

http://hplipopensource.com/hplip-web/index.html

You could always use IceWeasel Web Browser and the MozPlugger Plugin, I use this to read PDF and view other formats within the Browser, with the latest Raspbian Wheezy Distro: sudo apt-get update sudo apt-get upgrade sudo apt-get install iceweasel sudo apt-get install mozplugger There are quite a fe...