Just connected the display driver to the main board. Got the same black screen. What should I do next?

basicmark wrote:Not sure, but are you sure those aren't output pins (i.e. for playing the DVD through a TV rather then the built in display)?

The pcb connects to the lcd so I'm pretty sure that they are the input pins.
The pcb is the one on the second photo.

Tried feeding video through all pins except the rem pin but it doesn't work. What does the rem pin do?

I think that the display driver uses s-video input. The tv/c pin is color and s_y is image. If I connect the two pins to the composite out of the RPI it will work.

Just tested the inverter with the screen using my 2.5 amp 12v power supply.
It works
Now time to start with the display adapter.
looks like it even does not need 5v on the chip enable pin to activate it.
All I know is that this dvd player is from sony.

Ok guys. Yesterday I checked the ic on the display driver. Now I checked the inverter ic and found the datasheet for it. I found that the two pads on the pcb lead to the ic. One is a power input and the other is chip enable. The input voltage is from 6V to 17V. I plan to use it as a screen for th RP...

the inverter generates a high voltage for the indecent gas tube for the LCD backlighting, on the input (if there are only three wires) I guess would be one ground wire, (probably originally black) one power wire (probably originally red and for 12V) and one wire for "control" that is either on/off ...

Hi All Some days ago my friend gave me parts of a portable dvd player. the parts were: The main board The lcd controller board The inverter The problem I have with them is that he desoldered all of the wires. http://i57.tinypic.com/2je4qb9.jpg http://i59.tinypic.com/142viom.jpg http://i61.tinypic.co...

Ok guys, I don,t know what happened , but the motor started working when I typed pigs s 4 1500.
Now if I want to control the motor from python which command should I use?

When I was trying the ESC with arduino, I didn't do any initializations. And I don't think in needs one, because this ESC is used in only RC cars.

Just tried "pigs s 4 1500" after installing pigpio, and the motor started beeping.
Tried playing with the last number, the beeps were changing or completely stopping.

Hi, I have a problem trying to controll an ESC with raspberry pi and pi-blaster. This is the link for the esc. http://www.yourrccars4you.com/rchobby/images/MTPT-MP166-2.jpg I can't find any documentation about this esc. I tried this esc with an arduino.It does't work if you try .write , bit it works...