Question please, is the GPIO 18 pin, 3.3 or 5 volts?joan wrote:Gpio 18 is the only accessible gpio which has a dedicated PWM function.
wiringPi (as far as I'm aware) is the only library which uses that function.
What are you trying to do?
Code: Select all
#Spawn a getty on Raspberry Pi serial line #T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
Code: Select all
sudo apt-get purge openjdk-6-jre sudo apt-get purge openjdk-7-jdk sudo apt-get autoremove Then: sudo apt-get update && sudo apt-get install oracle-java7-jdk
Just my opinion, I have worked with serial from the onset back when the fastest was 110 baud. Just time for a change. That's all.DougieLawson wrote:
What's wrong with serial? It's got more than 50 years of hardware and software development behind it.
"If it ain't broke don't fix it", springs to mind.
Thank you, this is what I need.Hove wrote: in other words, which Raspberry Pi GPIO pin numbers are connected to which ESC / blade - have a look in my code for the pin_list and location_list in my code to see how these join together in my quad.
Thank you.Richard-TX wrote: Here is how to do it.
http://learn.adafruit.com/setting-up-a- ... t/overview
Having said that, you aren't really accessing your Rpi. You have turned on a service that gateways WIFI to the internet. The Rpi will then be an IP Router.
Thank you, Very much appreciated.silvanmelchior wrote:
How do we go about upgrading to this latest revision?silvanmelchior wrote:Update: It's now possible to halt and restart the process from the website. So you can release the camera temporarily for raspistill/raspivid. To get the update, just run the installer again.