Ok, I finally returned to my iogear gcs62hu, which is a 2-port hdmi/usb kvm switch, determined to get it to work for me. I achieved success. What I had to do: 1. I'm running Raspbian, so I had to edit /boot/config.txt and uncomment "hdmi_force_hotplug=1". Then the RPi and the switch would pass hdmi ...

dist-upgrade? How does just using apt-get upgrade work for you?

I installed the dante-server package and after configuring /etc/danted.conf I tried to start the daemon and got this in the log file: Feb 17 11:26:06 (1361129166) danted[4537]: socks_seteuid(): old: 0, new: 13 Feb 17 11:26:06 (1361129166) danted[4537]: socks_reseteuid(): current: 13, new: 0 Feb 17 1...

I believe arm*el is soft float.

I tried an iogear gcs62hu, which is a 2-port hdmi/usb kvm switch and just couldn't get the hdmi to pass through. I tried both the basic setup and the advanced setup with a belkin f5u234v1 4-port usb hub... no luck. I'm going to try iogear tech support on Monday. Does anybody have any suggestions for...

Has anybody considered a port of the UCSD P-System to the Pi?

Working with 9pi, he fixed the mouse driver to work with my Comfort Mouse 6000. Now to get serious with some Plan 9! Next up, my Intellimouse.

I ordered one. I was expecting to use it with Raspbmc, but I couldn't get it to work just being powered by the USB port on a Model B. I ended up purchasing a Belkin F7D2102 N300 Micro Wireless N USB Adapter from Amazon and that just worked great!

Is Raspberry Pi Fedora Remix 18 going to be armhf? I think I've plowed through every post in this forum but haven't seen any indication that it's going to be anything other than armel. I'm actually interested in trying out Tomcat but need to know what my javavm options are going to be.

I updated my image following the instructions here: <http://www.plan9.bell-labs.com/wiki/plan9/Updating_an_ARM_system/index.html> and noticed the following message at the top of the screen: Console output (/dev/kprint): usbotg: ep5.1 error intr 00000082 kb: /dev/usb/ep5.1: read: i/o error kb: exitin...

Add me to the list of users with non-functioning mice under Plan 9. I'm running the 12/19/2012 image and I've edited my cmdline.txt file to remove the parameter 'user=glenda' and add the parameter 'kbargs=-d'. For both mice, the last line printed is: usb/kb... usb/kb... user[none]: If I don't plug a...