Raspberry Pi Forums

remsnet

I have to ask. Why am I so unlucky? Guess what I'm left with? Four of my five surviving cards are Transend 8GB Class 10. All in all, from here, it looks as if an SD card is about as reliable as writing on tissue paper and then putting out in the rain. Read this , for help : https://github.com/raspb...

remsnet

i.e use dnyndns client that solve your truble.

remsnet

thejrcrafter wrote:Hey guys,
...
Thanks for all the help and good luck,
thejrcrafter

as RPIs are cheap , buy another RPI , load rpi debian , and install & fireup CUPS there.

hope this helps.

remsnet

Hallo, die größte SDHC-Karte, die der Raspi lesen kann, hat 32 GB. MfG Pofoklempner Falsch. Die grösste SD card die RPI lesen könnte kann man derzeit nicht kaufen : 2PB Die derzeit grossen kaufbaren 256GB gehen problemlos wenn notwendige Parameter beachtet werden die generell class 6 und 10 cards b...

remsnet

Hallo, ich bin auf der Suche nach einer geprüften SD-Karte ab 64GB Speicher. Bei raspberrycenter gibt es eine Liste in der aber nur Karten bis 16GB drin sind. Besteht überhaupt die realistische Chance auf eine so große Karte, die mit dem Pi geht? Kilian Ich habe 8x 64GB SD class 10 von Transseed un...

remsnet

please consider using udev rules to gain uniq disk names i.e /dev/sda

remsnet

Have tried multiple power supplies and cables, voltages all OK as per the troubleshooting guide. Have tried multiple SD cards, currently using a 8G SanDisk class 10 that is on the tested list. Have tried 2012-12-16-wheezy-raspbian and 2012-08-08-wheezy-armel loads. :( I may assume your downloaded i...

remsnet

Thanks for the reply. The problem is the MagicJack has a phone jack port and an ethernet port to be used as a stand alone VOIP when power is supplied from a USB wall adapter. But when its connected to a computer it disables its ethernet jack and tries to connect to the computer. I would like to hav...

remsnet

Hi together, Yesterday i did with RaspberryPi update then upgrade and now wireless does not work iwconfig finds it not ifconfig will not show well-Fi lo no wireless extensions. eth0 no wireless extensions. lsusb answer Bus 001 Device 004: ID 0846:9041 NetGear, Inc. WNA1000M 802.11bgn [Realtek RTL81...

remsnet

MaxK1 wrote:"5V @1A" from some of those chargers should be interpreted as "5V or 1A - just not at the same time..."

Buy an 2.5 A that deliver precise 5V regulated .

The CHEAPEST PSU are the WRONGEST PSU for the RPI - if you want an stable RPI

see http://elinux.org/RPi_Hardware

remsnet

Hey guys. I have already seen the kernel branch at Github, so I cloned and compiled it. ( http://elinux.org/RPi_Kernel_Compilation ) After installing and rebooting I executed uname -a to find out my new kernel version. I expected 3.9 but the output was: Linux raspberrypi 3.8.12+ #1 PREEMPT Thu May ...

remsnet

anyone think of building a multimib system with both abis (i.e. /usr/lib for hard float and /usr/libsf for soft float)? -mfloat-abi=hard compiled kernel seems not work with any 3.x.x see https://github.com/raspberrypi/linux/issues/276 - Removal of NWFPE in its entirety planed and unter work by main...

remsnet

Windd Wind32DiskImager Linux DD flashnul (1rc1) Bei allen erhalte ich das selbe Fehlerbild: nur die rote LED leuchtet sonst tut sich nichts. Efflicto Ich tippe auf ein CRC Fehler des Images. Selbiges Ergebniss ( dauer rote led ) habe ich hin und wieder bei defekten img oder geschrederten sd cards.....

remsnet

Has anyone started putting kernel 3.9.x on the pi? Since the F2FS is past it's teething in 3.9 and Phoronix is saying the Flash Friendly File System (F2FS) beats out ext4 on flash media (SDHC and USB thumb drives), I'm hoping folks are porting over to it. Either XFS beats ext4 with near kernel 3.3 ...

remsnet

I was looking at the details of buying an Mpeg-2 license and how to determine the serial number of the Pi: http://www.raspberrypi.com/vc-1-license-key/ . As well as the serial number, this also lists the measured BogoMips of the device. Trouble is, the foundation's serial #d Raspberry Pi is shown t...

remsnet

Quite interesting really. What make and type of card is it? Anyone else experienced this? I have just experienced the second such sd card failure. Raspberry pi will boot when applying pressure to sd card. Experiences IO errors when no longer applying pressure. Either immediately or within a few day...

remsnet

try use gparted from an running debian 7 live cd or knoppix on that and resize it so that may fit. if that failed, your dd image seems incompletly written . Other way been to create manulay the partions with fdisk and have 2 dd files , one for the p1 ( bootfs, vfat) one for the p2 (rootfs, ext4 ) th...

remsnet

schau auf http://elinux.org/RPi_Hardware

remsnet

Same problem too. [/code] Then I type make ARCH=arm CROSS_COMPILE=${CCPREFIX} modules and get stuck for nights. I do on my PI ( NO Crosscompile) : cd /usr/src/linux make oldconfig nohup make \ CPPFLAGS="-Ofast -mfpu=vfp -march=armv6zk -mtune=arm1176jzf-s" \ CFLAGS="-Ofast -mfpu=vfp -...

remsnet

Got the same problem here. Any solutions or help? Thanks. shure ... myself use 3.8.y source. but either 3.6.y shuold work . mysself compile kernels direct on the PI . No crosscompile.. Take longer ~22h but who cares :-) , Pi Compiled can run in background see at : - elinux.org/RPi_Kernel_Compilatio...

remsnet

Since this is the "Pi in the sky" thread...and it's April 1st.... .. .. well late wisch for the 1 april Thread for my PI Model "TERMINATOR" : Trilions of ARM Cortex A4711 at 1 Trilion TerraHz Integrated VideoTerminator Core® IV embedded processor 1080kp 300000 fps video encode a...

remsnet

speak englisch please ..

and look at : http://www.raspberrypi.org/phpBB3/viewt ... =62&t=6014

remsnet

Argon wrote:Hello,

What program is a good Telnet client for Debian? I need something like Putty to start in X for my Debian Raspberry Pi. Or can I install Putty on my Debian machine?

Code: Select all

apt-get install putty telnet

that will help

apt-cache search <softwarename>

helps for more..

remsnet

I tried again and I found when I plug in the modem, the four lights turn black except PWR.one second later they lit again. Will it relate to the electricity problem like overload? Yes that behavior provide that you overload the crappy and unsupported Power . At such overload that USB Power can beco...

remsnet

Mein Problem ist ja grade, dass ich kein Image zum laufen bekomme und immer nur dieser Text wie in dem Video kommt. Hint : Ich verwende das RPI image "2012-12-16-wheezy-rasbian" bzw opensuse-12.3-200130407 Das latest "2013-02-09-wheezy-rasbian" mit dem Systemd macht Probleme mit...

Search found 151 matches

Re: SD flash reliability

Re: If IP is x, then y

Re: CUPS on RISC?

Re: Geprüfte SD-Karte ab 64GB

Re: Geprüfte SD-Karte ab 64GB

Re: External USB HDD recognized as duplicate devices

Re: Have not been able to get brand new Pi to work

Re: Remove USB from hub connected to PI

Re: Update...Upgrade...then WLAN does not work

Re: Not work USB

Re: Kernel 3.9 on pi?

Re: linux multilib for raspberry pi

Re: Pi bootet nicht

Re: Kernel 3.9 on pi?

Re: Bogus BogoMips?

Re: SD card starting to bend

Re: Restoring SD card from backup made using dd

Re: Dokumentation?

Re: Kernel 3.6.11 and Netfilter Issues while compiling

Re: Kernel 3.6.11 and Netfilter Issues while compiling

Re: RaspBerry Pi(e) Model C (imaginations & wants)

Re: Raspbian on QEmu

Re: Telnet Client for Debian

Re: USB fax modem makes kernel crush

Re: Keine firmware auf meinem Pi? Hat sie ihre Tage?