Hi I made the module for you, you can get it here: https://www.dropbox.com/sh/jcl52tm7dqyu2c0/AABMcvWZaawLenyhaEfiGRm5a?dl=0 These two files should be copied into: /mnt/mmcblk0p2/tce/optional/ Then edit /mnt/mmcblk0p2/tce/onboot.lst and add the line: ENC28J60-4.1.13-piCore+.tcz save file exit editor...
Hi. That is an interesting HAT you have developed. I have not tried a ENC28J60 to Ethernet adaptor, but I think it might work as we have build the kernel with this option: CONFIG_ENC28J60=m If you are missing some modules when testing, please report back, and I will try to make a package for you wit...
Hi I'm also using piCore on many different cards, and have never seen a problem as you have here. If I were you I would download the newest piCore.img and burn to your problematic card. If it can boot you know that the card is OK, and you can start looking where in the process of copying your stuff ...
Hi. I have been using the new screen mounted as originally described. However, as I often need to change the SD-card I needed to mount the raspberry and the screen in a different way because the manipulation of the card was very awkward. Originally the SD-card is located inside the loop of the flat ...
I would like to build a new kernel and modules based on the 4.1.y.
In order to do so I would like to know if your standard kernel which you provide are build on the bcm2835_defconfig or you are using the bcm2709_defconfig.
Hi I have been following on Github the development in the kernel and has observed the development to change from ARCH_BCM2708 to ARCH_BCM2835. However, I don't know the reason/background for this: 1. Why is it important to go with the BCM2835? 2. Is it ready for actual use? should we now start build...
Hi cosycat. Thanks for testing. What kind of raspberry do you use? I know that the RPi2 have some "hissing" problems - but I thought that we have included the work-around suggested here: https://github.com/raspberrypi/firmware/issues/380 PS: You will get so much better sound using an USB audio card ...
Hi, Im running piCorePlayer on a Model A+ as a DIY wireless headphone -works great but I have a fairly loud background hiss when not playing any tracks. I assume the hiss is still there even when playing but hard to hear behind the music. Are there any recommended ALSA settings / parameters that ma...
Note that a future firmware update will allow a single config.txt to specify options for a Pi2 *and* a Pi1 independently. . Thanks for the info, will this allow us to have two different initramfs one for RPI2 and another for all the "older" RPi's? And then a common field in cmdline.txt like: "initr...
Yes, I think dynamic Device Tree is something we could support in future, but it is some way off. Until then, there shouldn't be anything you can do without DT that you can't do with it, unless the specific drivers have some DT detection logic that gets in the way. I suggest you: * Blacklist all of...
Hi Is it possible to load and unload a device tree dynamically, so that it can be manipulated without a reboot? I have read that at least the BeagleBone Black seems to allow such a behaviour http://events.linuxfoundation.org/sites/events/files/slides/dynamic-dt-elce14.pdf and here (read the section ...
Hi Phil Can there be a problem with initramfs and the new device tree? The reason for my question is that we have been trying to build piCore on the new 3.18.5 with DT - however we are not able to get it to boot from RAM. We have had no problems with building before the new DT. Cmdline dwc_otg.fiq_f...
Good afternoon and merry xmas to all of you! I recently bought a Raspberry Pi Mod B with this DAC http://www.audiophonics.fr/en/kits-modules-diy-dac/dac-pcm5102-i2s-p5-32bit384khz-raspberry-pi-p-8884.html I assembled both cards together (not welded, just plugged them into each other using the adapt...
On which kernel did the RTL8188CU dongle last work reliably? Have you tried without device tree? So far it doesn't sound like it belongs here. It works OK on 3.12.34. There's a whole lot of new code in the 3.18 kernel for the Realtek WiFi dongles and that could be a real show stopper if you try to ...
The Pi Hut has responded and I'm sending the defect raspi A+ (USB pins bent) back now.
Hopefully I will have a replacement soon. Then I will carefully attach a USB cable and connect the wifi adaptor to this cable.
What will be done officially in order to correct this issue?
Hi Regarding the correct starting sequence - I'm not aware that you need to start LMS or piCorePlayer in a certain order. I know that sometime the LMS take some time before it recognise the piCorePlayers (a minute or so). So what happens if you give it some time will they then connect? Is it better ...
I think that your LMS is getting confused by the two piCorePlayers. So I would suggest that you give each piCorePlayer an unique MAC-number. Go to the "squeezelite settings" page and give each player a unique MAC number (you could copy paste the actual number and use - it is present next to the inpu...