Hi! Just a little update after I had so many problems with my first board earlier this year: Constant re-starts Extremely slow Shitty WiFi Strange display of apps that could not be used like that Audio dropouts when starting A dozen different sd cards with most not working In the end I just got anot...

You could try adding hdmi_force_edid_audio=1 to /boot/config.txt or powering on your display before you power on the Pi. It is on; if switched to another port the raspberry will force it to switch to its port. Could that be enough delay to cause this problem? I will monitor it to find out. Thanks! ...

Most Linux live images have GParted included so you don't need to install it separately. I had to add it manually but I managed and it seems to work fine; the available size is the full sd card size. The system then graced me with another 2 restarts but seems to be working fine now. I am trying som...

You can easily live boot Linux from an USB drive on you PC. And you also have a Raspberry Pi that practically only runs Linux. ;) I have tried a Linux installation earlier that worked fine, but since it would be on a different card, that won't help much. Finding a Linux to boot from USB for the PC ...

You would need to mount the sdcard on your computer and use GParted on Linux to resize the data partition. You can't do it on Android because /data needs to be mounted and you can't resize partitions that are being used of course. It might be possible in TWRP but I haven't looked into it. You can't...

Hi! Me again. Is there a way to change the default download folder to a USB device? It is listed but I am unable to switch to it. Alternatively, I have a rather large SD card of which the image is using only a small part. Can I extend as either external or shared storage? I could not find Gparted fo...

And you haven't made any of your own modifications to e.g. /boot/config.txt or anywhere else? I just find it extremely strange if you can reproduce that even by changing the ramdisk.img in the 20200106 build with the one from 20200116 because there should be only those couple of things changed (you...

The only device connected is the Bluetooth adapter for the keyboard/mouse. I have not connected anything else since the system is not set up yet. I like to go one step at a time. :-) I have heat sinks installed and they seemed like body temp at the most which should have been ok. The Raspberry is no...

Sorry, 4GB.

Raspberry Pi 4 Modell B. 20200106 build works fine now except for the usb storage. 20200116 build boots to the complete Lineage logo on the black screen and reboots following a rainbow screen when it should be starting the white setup screen. I replaced ramdisk.img in the original installation with ...

Okay, I have replaced the original(!) power supply with another original one, replaced the card with a brand new one and tried with both cards from scratch. Same result. I have not done anything differently than with the first installation - which btw still works fine, it just won't recognize the US...

Hi! Thanks for the quick reply. I have copied the previous thread here to keep it together as suggested. Tried the new release hoping to at least get the USB ports working but I cannot get past the setup routine due to constant restarts. I learned earlier that this is a power supply problem and have...

Thu Jan 16, 2020 9:19 pm Welcome to the forum. :) Please use the existing thread instead of opening a new one. If you have questions/comments/problems with LineageOS 16.0 on the Pi 4, this is the topic you should use (https://www.raspberrypi.org/forums/view ... 1413acffdc). These are actually good q...

Copied form another thread by request: I am a newbi and am playing around with my first Raspberry Pi4 trying to set up an Android system. I did not have a problem installing Lineage for Pi 4 which seems to work fine. However, some apps I have been trying to install are being displayed cut off in a n...

Hi! I am a newbi and am playing around with my first Raspberry Pi4 trying to set up an Android system. I did not have a problem installing Lineage for Pi 4 which seems to work fine. However, some apps I have been trying to install are being displayed cut off in a narrow portrait window, rendering th...