Raspberry Pi Forums

nolex90

fruitoftheloom wrote: Raspbmc does not work with the RPi 2 B

https://osmc.tv/2015/02/raspberry-pi-2- ... mc-support

http://www.raspbmc.com

https://osmc.tv/download/images

Thank you for the fast answer.
The Raspbian is fully supported on RPI2?

nolex90

Hello guys. I bought an RPI 2 and the RASPBMC don't want to run. The Raspbian works well with a class10 kingston card. I installed with win32diskimager 0.9.5, and I downloaded the whole image from rpi.org. I tried the hdmi_safe = 1, it doesn't helped. Any suggest? edit: i see only the RGB screen on ...

nolex90

Hello users. I have a pi model B with an external powered hub that connects an wifi adapter and an Canyon CNR-FW113 USB webcam. I would like to stream a relatively fast and lag-free video stream to my PC. I have tried several solutions today: - motion -> 1-2 FPS too slow!! -MJPEG stream -> I can't s...

nolex90

It's possible the USB hub power supply isn't good enough to drive the Wifi adapter which could explain to lack of found networks. Providing your Pi isn't the original rev 1 board with poly fuse USB ports (F1,F2) then I would suggest you dump the hub and connect it directly to the Pi. Make sure your...

nolex90

I'd comment out anything to do with eth0 in /etc/network/interfaces as a trial. It sometimes causes problems. auto lo auto wlan0 iface wlan0 inet static address 192.168.1.248 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 wpa-ssid "EE-BrightBox-w99fa7" wpa-psk "whatever" wireless...

nolex90

What do you get from: lsusb ifconfig -a lsusb: Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port...

nolex90

Hello guys. I have an Edimax ew-7318USg wlan card with an external powered usb hub. But I can't connect any kind of wlan network and I can't see any SSID network. I use only WPA-PSK TKIP and SSID broadcast. /etc/network/interfaces/: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet ...

nolex90

Okay, now when I connect to the N network, instantly rebooting the PI. How can I make a log about the restart?

nolex90

The pi boots up with external powered usb hub. But when I would like to connect to one N network, it freeze again. It can scan for network (and it can't find 802.11 G type networks!!), but the connection fails. So I can't connect to any networks. dmesg message: 2.369756] usb 1-1: new high-speed USB ...

nolex90

Generally it is recommended to use a USB Mains Powered Hub, due to the Pi USB Bus not providing enough power..... http://elinux.org/RPi_Powered_USB_Hubs Nono, I mean that this USB hub got "own" power. I know that Pi doesn't have enough power for wlan card. The only problem is that it can't see the ...

nolex90

I installed a new Raspbian to my Pi, and connected a TL-WN722N USB wlan card with a self-powered USB-hub. The kernel recognized it correctly, I sat up the interfaces. But now, I see only the N-type wlan networks, and I have a G-type network and the source is established under my desk. How can I mana...

nolex90

Hi guys! I have some specific problem for my project: i would like to listening music from rasp using my stream server and RaspPi as a client. The main problems: How can I adjust RaspPi volume? I can connect to my shoutcast server perfectly, but it is very quiet. I am using shoutcast server for wind...

nolex90

So what should I do?
I need extra brandwith to store some unnecessary files on pi, or it can be used as a backup server.

nolex90

I have tried with two 1m cat5e cable and one 5m cable with two different routers.
The copy speed over winscp (sftp) is about 900 KB/S when i use vsftpd, it speeds up to 1400KB/s
So slow, but why? Can I do anything?

nolex90

ukscone wrote:are you sure it's running as 10M as i seem to recall Eben saying in a post somewhere that the 10M led is actually mislabeled.

But, when i reach over sftp the file transfer is so slow, about 800-900KB/s.
Do you believe that there is something wrong in config file or the hardware?

nolex90

Hi guys!
I noticed that my Pi runs on 10mbit ethernet speed.
I have checked all pins and soldering pads around the ethernet jack.
What should I do?

thank you

Search found 16 matches

Re: Raspbmc does not boot (black screen)

Re: Raspbmc does not boot (black screen)

USB webcam streaming server with Pi

Re: Wifi : can't find any SSID

Re: Wifi : can't find any SSID

Re: Wifi : can't find any SSID

Wifi : can't find any SSID

Re: TL-WN-722N G-type network problem

Re: TL-WN-722N G-type network problem

Re: TL-WN-722N G-type network problem

TL-WN-722N G-type network problem

Using RaspPi for a stream client

Re: Ethernet only running half-duplex, 10M

Re: Ethernet only running half-duplex, 10M

Re: Ethernet only running half-duplex, 10M

Re: Ethernet only running half-duplex, 10M