Go to advanced search

by saihoufung
Sat Jun 23, 2018 11:46 pm
Forum: Troubleshooting
Topic: Raspberry Pi 3 Ethernet Issue
Replies: 29
Views: 7021

Re: Raspberry Pi 3 Ethernet Issue

Hi, ifconfig only show the current ethernet, loopback & wlan info / connection. Didn't help to add new USB-Ethernet. Currently I have Bus 001 Device 005: ID 0b95:772b ASIX Electronics Corp. AX88772B USB-Ethernet card and how to install driver to Raspberry Pi Raspbian Jessie. I search online and foun...
by saihoufung
Sat Jun 23, 2018 11:19 am
Forum: Troubleshooting
Topic: Raspberry Pi 3 Ethernet Issue
Replies: 29
Views: 7021

Re: Raspberry Pi 3 Ethernet Issue

I have 4 Raspberry Pi (3 Raspberry Pi 3B & 1 Raspberry Pi 3B+). Only 1 of the Raspberry Pi 3B got this problem recently.

If in this case, I would like to disable the onboard Ethernet, is it possible? I can use USB-Ethernet to have it run. Hope to hear from you soon.

Regards.
by saihoufung
Fri Jun 22, 2018 11:20 pm
Forum: Troubleshooting
Topic: Raspberry Pi 3 Ethernet Issue
Replies: 29
Views: 7021

Re: Raspberry Pi 3 Ethernet Issue

Hi, I swap many LAN cables, different MBit Port at the Switch, also unchanged. The On Board Ethernet sometimes work, sometimes not work. ** The other working LAN cables plug into other PC / Raspberry Pi / Orange Pi / Nano Pi, it works without any issue. Network Switch ports also the same, no matter ...
by saihoufung
Fri Jun 22, 2018 1:38 pm
Forum: Troubleshooting
Topic: Raspberry Pi 3 Ethernet Issue
Replies: 29
Views: 7021

Re: Raspberry Pi 3 Ethernet Issue

Hi, I unplugged the FlightAware Pro-Stick Plus from USB Port then reboot also having the same. FYI, the LAN Cable is original AMP Cat6 Patching cable, it is a working cable as I swap the cable to any Ethernet port, it works. Any working LAN cable plugged into the Raspberry Pi Ethernet port is not wo...
by saihoufung
Fri Jun 22, 2018 1:51 am
Forum: Troubleshooting
Topic: Raspberry Pi 3 Ethernet Issue
Replies: 29
Views: 7021

Raspberry Pi 3 Ethernet Issue

Hello all, I found out that my Raspberry Pi 3B's ethernet port will not working after reboot. I will need to manually unplug the ethernet RJ45 plug and wait for few seconds then plug-in again, it will work again. In somehow, it will not work again and have to unplug it and reboot. The DC Jack (micro...

Go to advanced search