There must be an issue with the ASIX AX88179 and the Rpi Model B Rev 1. I tired a different adapter AX88772B and I get full speed now both down and up now!
Thank you for testing. I have updated the config from DHCP to manual. Still have the same issue. I downloaded the ASIXS_AX88179 linux driver from the website and then could not get the network adapter to come up with that driver installed. I have rolled back and am going to now locate a new USB to E...
If it wouldn't be too much of a hassle that would be great if you could check on your side.
Yesterday I built a second rpi just to rule out the onboard ethernet hardware. Now that all cables and hardware but the USB network adapter has been changed I think we can almost confirm that is the issue.
Both are showing full duplex $ ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/...
Scenario: I have created a network bridge between my modem and router to use cacti to capture network traffic so I can view my usage since my ISP does not provide it. Problem: My USB adapter eth1 (Startech USB31000S) is only allowing half the speed through it. For example when eth0 is plugged into t...