Raspberry Pi Forums

sirus

Noted about the code tags.

I've changed the numbering scheme on the C# program but that doesn't make any difference.

sirus

Hi All, I've been messing around with led and buttons on my PI4 and wanted to work in a language most common in me which is C#. So, to get me started getting used to working with the PI's GPIO, I have found some quick and simple examples to get and led flashing and then to use a button to control it...

sirus

Just have a question about Kodi.

I am using a PI2 and I have noticed Kodi is running at 100% cpu and the temperature rises to 140F+. Is this normal?

sirus

Hi Guys, I have a pi set up to run several programs e.g. kodi, emulationstation, vlc. I have been getting issues where a program crashes, so I was consider solving the problem with writing a script that maybe runs on startup that constantly checks what programe is currently in use and looks out to s...

sirus

I am using the 8GB Sandisk Ultra that comes with pi starter packs. I have a Kingston sd card too, and its roughly the same speed.

sirus

Not too sure about the codecs tbh but video playback is fine. Its interface really. Slow moving off items or going back up directories. Installing add-ons from zip and respositories is the worse though.

sirus

Hi All. I currently have a Pi2 (standard clock) running retropie. When using Kodi(Jarvis), it is slow and my Pi's ACT led is going bonkers. I am putting it down to a lack of process power so am debating one of two things 1. Overclock my PI2 2. Buy a PI3 Despite getting the speed I may require, I am ...

sirus

Hi, I am having an a few issues I have set up moonlight according to some instructions on https://github.com/RetroPie/RetroPie-Setup/issues/1082. Strangely,this had worked for my first build bit but trying to do a second I am having a few issues. 1.Steam doesnt show in my retropie menu despite its i...

sirus

Google aikoncwd. He/She might have what you're looking for.

sirus

I got the following equipment: TP-LINK 600Mbps TL-PA4010PKIT Powerline Adapter PI2 with a 5v 2a power adapter. Wifi dongle (Standard one you get with pi start up kits im afraid) I have a talktalk router which has a pretty poor signal strength passed the room its situated in. I was hoping to cut goin...

sirus

Sorry for the poor worded subject in advance. I have Kodi installed on my phone which I sometimes connected to a shared folder on my pc via wifi to watch movies on my hard drive. The problem I am facing is that I sometimes lag depending on where I am in the house. I was just curious If any knows sen...

sirus

I've had a look at some potting devices and some other enclosures. Seems that they are made from ABS plastics?

Any one had any exprience putting holes through this with cracking it.

sirus

I thought about Tupperware

sirus

Looks like exactly what im after. Didn't even consider googling potting boxes.

Thank RaTTuS

sirus

Hi All, Ive been looking around for casing/enclosures that are big enough to fit a pi along with other gear in (wires, breadboard, hdd etc.) but haven't had much luck. Starts looking into HTPC cases, bespoke enclosures made from wood or tin but there were either expensive and needed to be purchased ...

sirus

Trying to create advance launchers for moonlight and emulationstation. Does anyone know where there are on v4?

sirus

So would a TalkTalk modem/router be sufficent enough to act as an injector?

I've attached a pic explaining what I'm hoping to achieve without the hdd.

sirus

Wouldn't powering it through the modem be enough?

sirus

Yep my PI2 has the official 5V2A adapter. Still the disc is not spinning unless I am missing some config.

This is one of the PoEs im thinking of getting:

https://www.amazon.co.uk/DSLRKIT-Active ... Active+POE

sirus

Hi guys, I looking buy some Active PoEs to power up my Pi and HDD. My HDD requires 2 Usb connections via a USB-Y cable to work and current the pi doesnt have enough power to get the disc spinning, despite setting max_current_usb=1. I am probably going to use one PoE to power the Pi and another to po...

sirus

Cool, I thought that my be the case. Thanks.

sirus

Hi Guys,

I about to rip out everything from an old Sky box to use the box to host my pi, hdd and other bits and pieces. I was just curious if anyone has any luck salvaging the sky parts to be used with the PI. In particular, the DvB part (for satelite tv)

Cheers.

sirus

Hi

I am experience a strange issue with v6. I am getting no screen visuals. Formated sd card twice with same outcome. ACT led seems busy doing something.

sirus

Brilliant. I think thats on the lines.

So essentially I would need 2 LEDs with reisitors and add the following lines to my boot.config
dtparam=act_led_gpio=nn
dtparam=pwr_led_gpio=nn

(nn representing BCM number)

sirus

Hi Guys,

Was just curious if anyone knows how to connect Leds to the PI2 which represent the power and hdd just like they do on the board?

Search found 29 matches

Re: GPIO button not working straight away in .NET Core

GPIO button not working straight away in .NET Core

Re: Mediacenter + Emuladores + Juegos PC Steam para Raspberr

Script to Auto Reboot pi or program when crashes occurs

Re: HEAT - P3 vs P2(Overclocked)

Re: HEAT - P3 vs P2(Overclocked)

HEAT - P3 vs P2(Overclocked)

Moonlight issues with retropie

Re: RPi3 + RetroPie + Kodi + Moonlight

Re: Using Pi to send pc signal to phone

Using Pi to send pc signal to phone

Re: Cases that are big enough for pi and other gear

Re: Cases that are big enough for pi and other gear

Re: Cases that are big enough for pi and other gear

Cases that are big enough for pi and other gear

Re: Mediacenter + Emuladores + Juegos PC Steam para Raspberr

Re: Using Active PoEs to power pi and hdd

Re: Using Active PoEs to power pi and hdd

Re: Using Active PoEs to power pi and hdd

Using Active PoEs to power pi and hdd

Re: Salvaging Sky box for to use with Pi

Salvaging Sky box for to use with Pi

Re: Mediacenter + Emuladores + Juegos PC Steam para Raspberr

Re: Power and HDD leds for PI2

Power and HDD leds for PI2