I received my Arduino Nanos yesterday and was able to get them to talk to the pi via USB cable...

More info to come

Sorry for the delay in posting, it has been quite a hectic summer.... Anyways here are the updates! I started with making the dash out of Foam Core board and 2 part epoxy. https://pix.sfly.com/Vcb9vr After I had that made I fit in the 2x 7" Touch screens and Tach. https://pix.sfly.com/OT-emH Then I ...

With having the 2 displays I figured I would have 1 Pi drive each of the screens.

(Reserved for Updates)

I Swapped one of the Raspberry Pi 3's for a Pi 2 because I was having issues getting the GPS to work properly... I have installed the following: Installed Raspbian (Jessie) TightVNCServer sudo apt-get install tightvncserver and added it to auto start with the Pi sudo nano /etc/rc.local and added the...

Hello all! I am working on a Car Dash Replacement project for an 84 Camaro Z28. I'll try and update as I go through and get stuff completed with the steps that I took to get it done... Goals for the Project: Create a Complete Dash Replacement that can do the following: Multiple Displays with the abi...

Im having this same issue, I'll be looking into it for the next few days, if I find something i'll let you know

This is an Amazing thread! I was just thinking about doing this for my 84 Camaro z28... I just put a 427 in it and removed all the computerization stuff in it. I was looking for a way to have 2x 7" screens in it plus using a 7segment display for the tach. I was thinking of having 1 screen for all of...