GTR2Fan wrote:

alex1403ia wrote:No, nothing, just blinking green light

That's bad news I'm afraid. It's almost certainly dead then.

There's no way yo bypass the fuse??, or some last test??, when the red led turns off the Pi was connected by USB, not directly...

GTR2Fan wrote:

alex1403ia wrote:Was alive... In that picture I powered by pins 04 and 06.

Ah. OK. Is the red power light on the Pi lit when you power it up via pins 4 and 6?

No, nothing, just blinking green light

GTR2Fan wrote:

alex1403ia wrote:I've tried power up the Pi with 5V by GPIO pins 2 and 3, same result, just green led flashing in an infinite loop

If it wasn't dead before then it probably is now. Pin 3 is GPIO2. It's not a power pin...

http://i.stack.imgur.com/Ct2JG.png

Was alive... In that picture I powered by pins 04 and 06.

Extra comment, I've not connected the Pi to power by two days, and when connected the result is the same

Please, any help, I've heard about putting a resistance in the fuse, I just want to know if the Pi is dead

Hello this is my first post, I've been reading but there's not many información about Pi 2, so, this is my problem. I was working on my Pi 2 and I blown the fuse, the symtoms are: - green led infinite blinking, the red never turns on - no video - overheating F1 fuse in less than 10 secs smells burn ...