After trying suggested fixes with no luck, I decided to order a new sd card pre-loaded with NOOBS in case there was anything wrong with the sd card. So far I haven't changed anything on the sd card-haven't made files or users; haven't changed settings or installed programs. In Raspbian, if the sound...

Hi again,
Tried playing the "what is a Raspberry Pi" video on the help page and a few YouTube videos. There was no sound on any of them.
What else can be done to solve this problem?
Many Thanks.

Hi again, Tried a second hdmi cable but with no luck. This is what was reported by omxplayer: omxplayer -o hdmi /home/pi/Desktop/my-recording.wav Audio codec pcm_s16le channels 2 samplerate 44100 bitspersample 16 Subtitle count: 0, state: off, index: 1, delay: 0 have a nice day ;) Thanks again for y...

Hi gkreidl,
Tried running "omxplayer -o hdmi /home/pi/python_games/beep1.ogg" and "omxplayer -o hdmi /home/pi/Desktop/my-recording.wav" but did not get any audio; what can be done?
Thanks again.

Tried playing a file in omxplayer. Didn't have one ready so I made a quick recording in sonic pi using this: 2.times do play_pattern [40,25,45,25,25,50,50] play_pattern [40,25,45,25,25,50,50].reverse end Then used "omxplayer /home/pi/Desktop/my-recording.wav" Still no sound. Tried changing the sound...

Hi gkreidl, ran the command. Here are the results

PCM supported: Max channels: 2, Max samplerate: 192kHz, Max samplesize 24 bits.
AC3 supported: Max channels: 6, Max samplerate: 48kHz, Max rate 640 kb/s.

Thanks for the help both of you, its really appreciated.

Hi again, tried cea modes 4, 2, 31, 19, 5, 16, 20 and 34. However none of them gave sound. I tried some with hdmi_drive=2 with no change. I tried switching the sound card in alsamixer by pressing F6 with each mode, however this didn't help. I also tried the headphone jack with and without this comma...

Ran the command, here are the results: Enabling fuzzy format match... Parsing edid.dat... HDMI:EDID version 1.3, 1 extensions, screen size 115x65 cm HDMI:EDID features - videodef 0x80 !standby !suspend !active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is...

Thanks for your suggestion paulie. I tried enabling these settings this from the thread:

hdmi_drive=2
hdmi_group=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1

CTRL+O to save
CTRL+X to exit

Still no luck, is there anything else I can do?
Thanks again.

Forgot to add that I am using Raspbian.

Hi, I have just got my first Raspberry Pi. I am relatively new to Linux and I am having trouble with the Raspberry Pi. I cannot get the audio to work via hdmi on multiple hdmi TVs and have tried different walkthroughs/tutorials. So far I have tried various methods in the config.txt file: Setting "hd...