Go to advanced search

by lpsw
Mon Apr 01, 2019 4:21 am
Forum: Beginners
Topic: My Raspberry pi don't get ip address
Replies: 10
Views: 537

Re: My Raspberry pi don't get ip address

I followed your suggested link. unfortunately i have kernel panic problem and my raspbian don't set up.
can you help me?
Do you have a monitor/keyboard attached?
If so, can you post the relevant messages from dmesg?
If not, how did you determine there was a kernel panic?
by lpsw
Fri Mar 29, 2019 7:28 pm
Forum: Troubleshooting
Topic: no boot - always red light - rpi3b+
Replies: 9
Views: 364

Re: no boot - always red light - rpi3b+

The power supply and the microsd card works fine on an other raspberry.
Which model (the other Raspberry) ?
by lpsw
Fri Mar 22, 2019 3:47 am
Forum: Beginners
Topic: XBEE XCTU GUI with Raspberry Pi 3 Model B+
Replies: 4
Views: 816

Re: XBEE XCTU GUI with Raspberry Pi 3 Model B+

I get a bash error ( "cannot execute binary file: Exec format error") As Andyroo correctly indicated, you are trying to install a x64 binary - that will not run on ARM: https://www.digi.com/support/forum/66502/is-it-possibile-to-install-xctu-on-raspberry-pi3 I run XCTU on two Debian/x86 notebooks, ...
by lpsw
Wed Mar 20, 2019 5:56 pm
Forum: Troubleshooting
Topic: No IP on Gigabit Switch !
Replies: 19
Views: 797

Re: No IP on Gigabit Switch !

vincen wrote:
Wed Mar 20, 2019 2:36 pm
I have always tried them one by one (never got two of them plugged in same time ;)
When you did the above, did you use the exact same port on the switch for each test?
by lpsw
Sat Mar 09, 2019 12:06 am
Forum: General discussion
Topic: ALT key stuck in Florence
Replies: 8
Views: 1901

Re: ALT key stuck in Florence

C'mon pi guru's, nobody ever answers my posts!!!!!!!!!!!! I really need a solution. Seriously? You waited 17 minutes before complaining you hadn't gotten an answer yet? Not everyone here is on at the same time. Not everyone here is even awake at the same time. Give them a chance. It took me 17 seco...
by lpsw
Sun Mar 03, 2019 9:01 pm
Forum: General discussion
Topic: Engine control unit
Replies: 18
Views: 803

Re: Engine control unit

I already linked a source, but you can also search for 'fossil fuel ban' I read the info in your link. The ban for "most of the world" is at least 11 years off - then there's potential delays due to inevitable litigation. Just want to make that clear to the OP. May or may not affect the OP's project.
by lpsw
Sun Mar 03, 2019 8:25 pm
Forum: General discussion
Topic: Engine control unit
Replies: 18
Views: 803

Re: Engine control unit

Are you aware that next year most of the world will ban production of new internal combustion engine powered vehicles?
Link? I would find that exciting, if true.
by lpsw
Fri Feb 22, 2019 6:37 am
Forum: Beginners
Topic: How: Python/ExifTool output to I2C LCD?
Replies: 15
Views: 1011

Re: How: Python/ExifTool output to I2C LCD?

I think the directory does matter. It needs the correct path to the image file(s), and must find exiftool.py in the Python search path.
by lpsw
Fri Feb 22, 2019 6:31 am
Forum: Beginners
Topic: How: Python/ExifTool output to I2C LCD?
Replies: 15
Views: 1011

Re: How: Python/ExifTool output to I2C LCD?

Interesting, I get an image = 70 from rose.jpg: [email protected]:~/PyExifTool-0.1.1/test $ python my_testexif.py 70 my_testexif.py: import exiftool import os, errno files = "rose.jpg" with exiftool.ExifTool() as et: metadata = et.get_tag('ImageWidth', files) print(metadata) Edit to corect speling
by lpsw
Fri Feb 22, 2019 5:51 am
Forum: Beginners
Topic: How: Python/ExifTool output to I2C LCD?
Replies: 15
Views: 1011

Re: How: Python/ExifTool output to I2C LCD?

It's a little wonky, and documentation is weak, but it works for me. I didn't use pip, IIRC (It's been a few years since I've used it ;) ) Example testexit.py: import exiftool import os, errno files = "a.jpg" with exiftool.ExifTool() as et: metadata = et.get_tag('ImageWidth', files) print(metadata) ...
by lpsw
Thu Feb 21, 2019 4:42 am
Forum: Windows 10 for IoT
Topic: Raspberry Pi 3 B+ Error 0x8007000d
Replies: 1
Views: 1059

Re: Raspberry Pi 3 B+ Error 0x8007000d

It's not clear from your description, but assuming the 0x800700d is being thrown by Windows, it usually indicates the Windows file system has been corrupted - nothing to do with your Pi.
What are you using to flash the SD card?.
by lpsw
Tue Feb 19, 2019 9:27 pm
Forum: Beginners
Topic: ssh disabled on update of headless Pi 3b+, Feb 02, 2019
Replies: 10
Views: 800

Re: ssh disabled on update of headless Pi 3b+, Feb 02, 2019

2.) Who thinks that is a good idea?
Some very smart people who understand the security risks, better than *most*.
by lpsw
Sun Feb 10, 2019 7:42 pm
Forum: Off topic discussion
Topic: Order a special request Raspberry Pi :?:
Replies: 68
Views: 5007

Re: Order a special request Raspberry Pi :?:

As was previously noted, ESX requires an x86 processor...

https://www.vmware.com/resources/compat ... search.php
by lpsw
Sat Feb 02, 2019 6:05 pm
Forum: General discussion
Topic: Translation issues
Replies: 49
Views: 2620

Re: Translation issues

Ceasar's Obfuscation...
by lpsw
Thu Jan 24, 2019 6:46 am
Forum: Troubleshooting
Topic: Putty Fatal Error on Reboot
Replies: 5
Views: 331

Re: Putty Fatal Error on Reboot

raspi-config can't be used to change the default user name, just the default host name/password.
To add/change the user name, see here:
https://www.raspberrypi.org/documentati ... e/users.md
by lpsw
Thu Sep 20, 2018 2:09 pm
Forum: Networking and servers
Topic: Need help setting up a raspberry pi camera that streams to the web
Replies: 5
Views: 1669

Re: Need help setting up a raspberry pi camera that streams to the web

I would try here: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=115583 It's a *great* piece of work, and easily set up. The forum has a lot of good (and interesting) info and Bill has done a great job with documentation and support. I've used it successfully for years, on several Pis from ...
by lpsw
Wed Jun 27, 2018 2:07 am
Forum: General discussion
Topic: Why didn't we go with Mali?
Replies: 157
Views: 26452

Re: Why didn't we go with Mali?

I'm not wrong, you maybe just worked in a different decade or a different region. Its well documented that the IBM sales force employed less than honourable tactics, in fact the term FUD which we still use today was actually invented by Gene Amdahl an ex IBM employee to describe the disinformation ...
by lpsw
Wed Apr 26, 2017 4:44 pm
Forum: Beginners
Topic: Have 32-bit or 64-bit Raspberry Pi?
Replies: 6
Views: 6329

Re: Have 32-bit or 64-bit Raspberry Pi?

The BCM2737 is a 64 bit Cortex A53 chip.
http://www.datasheetcafe.com/bcm2837-da ... -broadcom/
by lpsw
Mon Dec 12, 2016 2:44 pm
Forum: Camera board
Topic: PiKrellCam: motion vector detect + OSD web interface
Replies: 1477
Views: 339556

Re: PiKrellCam: motion vector detect + OSD web interface

Indeed, wicked easy. I usually clone Jessie lite for new Pis, with the stuff I need (like ssmtp) but this time I built from scratch (11-25 version) on a Pi3 booting from USB SSD. Let's just say I missed more than few things :). Thanks again.
by lpsw
Sun Dec 11, 2016 11:34 pm
Forum: Camera board
Topic: PiKrellCam: motion vector detect + OSD web interface
Replies: 1477
Views: 339556

Re: PiKrellCam: motion vector detect + OSD web interface

Thank you Rainer, you put me in the right direction. When I tried command line mpack it failed because ssmtp was not installed on this Pi. Thanks again to you and Bill.
by lpsw
Sun Dec 11, 2016 8:41 pm
Forum: Camera board
Topic: PiKrellCam: motion vector detect + OSD web interface
Replies: 1477
Views: 339556

Re: PiKrellCam: motion vector detect + OSD web interface

Rainer, thanks for your reply. Definitely an oversight on my part. Unfortunately there's still something amiss. I've tested sending email to my yahoo and gmail accounts using Python 's SMTPLib package, that works fine from the same Pi. There's got to be another typo somewhere; I'm pretty sure that's...
by lpsw
Sun Dec 11, 2016 2:44 pm
Forum: Camera board
Topic: PiKrellCam: motion vector detect + OSD web interface
Replies: 1477
Views: 339556

Re: PiKrellCam: motion vector detect + OSD web interface

What an amazing piece of work Bill. Thanks to you I just ordered my 10th and 11th Pi Cameras :) I'm having just one minor issue that I can't seem to figure out. I'm trying to send an email using on_motion_preview_save. From looking at the log all looks OK but I never get an email (1 yahoo and 1 gmai...
by lpsw
Tue Dec 06, 2016 2:49 am
Forum: General discussion
Topic: Running x86 apps on ARM
Replies: 92
Views: 119195

Re: Running x86 apps on ARM

I would assume that code with that level of intelligent should be able to detect the cpu type and configure itself appropriately?

Go to advanced search