Raspberry Pi Forums

SonOfAMotherlessGoat

If you're going to add a GDI to Jessie Lite, just grab the Full Jessie and save yourself the headache.

SonOfAMotherlessGoat

Full Jessie has X and a full graphical desktop. Lite has all that removed, it's pure CLI.

SonOfAMotherlessGoat

Like this? http://www.maplin.co.uk/p/3mm-multi-colour-led-gw62s That give you the FV and FC which you can plug in to an LED calculator, like this http://led.linear1.org/1led.wiz If you are powering from the Pi, your source is 3.3V. Physical wiring like this: https://thepihut.com/blogs/raspberry-pi-t...

SonOfAMotherlessGoat

If you have a DHCP server on your local network, perhaps you could set up a static lease for your Pi and just use the OOB configuration?

SonOfAMotherlessGoat

If they are 3 lead TriColor LED's, then you should have one lead that is longer than the other two. That is your common. When you supply power to Common and one of the short leads, you'll get either Red or Green. and when you supply power to the other short and common you should get either Green or ...

SonOfAMotherlessGoat

If it's a new laptop that you are buying then it most likely will run Ubuntu with no problem. (I have 16.04 running a server with 256MB RAM and 7.5G HD space. The Ubuntu guides show 2G HD and 512MB RAM for minimal install with Desktop)

SonOfAMotherlessGoat

nano /etc/network/interfaces Read the header of the interfaces file, noting the portion that states that the file is meant to be used with dhcpcd. (Admitting the language could be clearer, but it means Don't Set Static Addresses In This File, use the dhcpcd config files instead.) So put the interfa...

SonOfAMotherlessGoat

You'd have to source the Pine64+ boards. They seem to be rarer than a Zero. (And I can't get mine to GigE, it's stuck with the current half-supported software.)

Flag me, I'm off topic!

SonOfAMotherlessGoat

From the Boot Problems Sticky: Check that your power supply and its USB cable is working and fit-for-purpose This is sufficiently important that the B+ and Pi 2 now contain a detector that signals bad power. On the model A and B the PWR LED was simply connected to power, but on later models of the P...

SonOfAMotherlessGoat

boyoh wrote:The Pi with good specifications ,and power handling. Wont perform any better then The power supply feeding it.

And often the power supply feeding it doesn't do what is stamped on the tin. Wasn't it F T that had a list of labeled vs actual for supplies?

SonOfAMotherlessGoat

There is a sub-forum dedicated to the Win10IoT platform, viewforum.php?f=105

You probably will get quicker and better responses (no insult to bensimmo intended) if you delete this post and start a new thread in that Sub.

Good luck!

SonOfAMotherlessGoat

It will not work. Full Stop. Do not pass go, do not collect $200. There is nothing you can do to make it work on the Pi. Sorry to have to be so blunt, but you've been told this numerous times. It's just not going to happen.

SonOfAMotherlessGoat

peterlite wrote:@ Milliways, is
sudo systemctl stop dhcpcd.service
permanent across boots? If so, I might retest Raspbian on the Pi.

It is if you

Code: Select all

sudo systemctl disable dhcpcd

Now, to whom shall I send my invoice? 3 minutes on Google should be worth a grand or two?

SonOfAMotherlessGoat

Well, that Windows XP would have to upgrade itself to Win 7 first...

Spoilers: It's WinXP on QEMU with 512M RAM.

SonOfAMotherlessGoat

I'm able to get that repo via https. Is apt-get still showing the same error? Can you browse to that repo's web interface with either the Pi or another computer on your network?

SonOfAMotherlessGoat

You redacted the important information. You don't need to redact the RFC 1918 addresses. Looks like you have either an addressing or a routing issue going on.

Are you able to ping the gateway?

SonOfAMotherlessGoat

Output from:

Code: Select all

ip a

Code: Select all

ping 8.8.8.8

Code: Select all

ping google.com

SonOfAMotherlessGoat

Are you using Rasbpian Jessie? My copy of interfaces has a header that may be of help: pi@raspberrypi:~$ cat /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) # Please note that this file is written to be used with dhcpcd # For static IP, consult /etc/dhcpcd.conf and 'man dh...

SonOfAMotherlessGoat

Doesn't look like it, no linux support.

http://www.heroesandgenerals.com/community/game/faq#q18

SonOfAMotherlessGoat

Looks like you have a networking issue:

Code: Select all

Failed to connect to dev2day.de port 443: Network is unreachable

Are you able to ping 8.8.8.8 and ping google.com?

What is the output of `ip a` on your Pi?

SonOfAMotherlessGoat

How does the material used affect your storage situation?

SonOfAMotherlessGoat

Step 2: approach Raspberry Pi Trading for permission. Most Pi based stuff is free to produce but as an astro pi case is clearly an item that they have made you may need to pay a license fee. If so they will probably give you access to the official stl files. Clive mentioned (perhaps jokingly) that ...

SonOfAMotherlessGoat

They use SMD caps, not the electrolytic capacitors that were known to 'fail' in sometimes rather spectacular ways.

Not sure what the use case is for buying and storing unused for many years, why not just wait until you need them in a few years and buy the latest model then?

SonOfAMotherlessGoat

You'd need two opto's, one for each button you'd like to control. Wire from GND on Pi to Pin 2 on the Opto, Wire from GPIO signaling pin on Pi to Pin 1 on Opto with 330 Ohm resistor in series. Wire from Opto Pin 6 to one pad of button, wire from Opto Pin 4 to other pad. Control through language of y...

SonOfAMotherlessGoat

Start a new thread, please don't post to a 4 year old thread that has nothing to do with your question.

Thanks

Search found 690 matches

Re: Jessie Lite desktop login fails

Re: Raspbian Jessie - or - Raspbian Jessie Lite

Re: 3 Pin RYG LED Wiring

Re: Assigning static IP

Re: 3 Pin RYG LED Wiring

Re: Looking to buy a new laptop

Re: Assigning static IP

Re: Grendel....80 core Pi 3 cluster

Re: Pi becomes unresponsive, blaming PiDrive

Re: Raspberry Pi 3 GPIO Current

Re: Windows 10 IoT Core API Porting Tool

Re: Men of War

Re: Raspbian Jessie equivalent to ipconfig /all?

Re: Is it possible to install/use Windows 7 on Raspberry Pi

Re: Problem when install Plex on raspberry pi

Re: Wifi connected but no internet

Re: Wifi connected but no internet

Re: Wifi connected but no internet

Re: Heroes and Generals

Re: Problem when install Plex on raspberry pi

Re: Capacitor types used on Pi 3

Re: Full aluminium enclosure for Raspberry Pi 2 B (2015)

Re: Capacitor types used on Pi 3

Re: Use Pi 2 pinouts to close a circuit?

Re: Samsung LCD display for Rasberry Pi