I've tried to make a crontab by adding "@reboot python /home/pi/PiSupply/softshut.py" to the crontab file but that doesn't seem to make any difference.

First of all, what i want to achieve is to be able to power ON and OFF my RPi3B with a single momentary switch. I bought and assembled the Pi Supply Switch and placed the neccesary files / codes onto the RPi3. The on and off buttons work, but i don't need those. The soft-off button doesn't do anythi...

I think the easiest solution for me is to buy a 12v powerbank, like this one (sorry, the page is not in english) : https://www.conrad.nl/nl/tecxus-tp-10000-powerbank-10000-mah-3-usb-poort-en-251166.html There's a comment confirming it can be used and charged at the same time. 10000mAh at 12v might e...

i suggest buying a simple yard light opening it up and taking the board out, hook up your battery(replacing its thripple A) and hook up the batter to your pi as welland remove the solar panel replacing it with your charge port thing. you may have to replace the ristor as well, i had to. (depending ...

You could use one of these power packs: http://uk.rs-online.com/web/p/power-banks/7757508/?searchTerm=7757508&relevancy-data=636F3D3126696E3D4931384E525353746F636B4E756D6265724D504E266C753D656E266D6D3D6D61746368616C6C26706D3D5E5C647B367D247C5E5C647B377D247C5E5C647B31307D2426706F3D313426736E3D592673...

The wall charger likely has only voltage regulation circuit. Hmm i don't think so, the wall charger has an extra little box attached. This is what it looks like : http://www.vapextech.nl/NiMH-batterijladers-oplaadbare-batterijen/Lader-voor%E2%80%93NiMH-RC-accupacks Battery : http://www.vapextech.nl...

Hello, I am close to finishing my RPi portable, pretty standard stuff: a RPi, screen, battery and some buttons. I want to connect my RPi and display to a Nimh battery pack (7,2v 5000mAh), but i want to be able to use te portable while it is being charged. My setup right now uses between 450-550mAh ...

Hello, I am close to finishing my RPi portable, pretty standard stuff: a RPi, screen, battery and some buttons. I want to connect my RPi and display to a Nimh battery pack (7,2v 5000mAh), but i want to be able to use te portable while it is being charged. My setup right now uses between 450-550mAh a...

fruitoftheloom wrote:http://www.raspberrypi-spy.co.uk/2014/0 ... video-jack

Thanks, that clears things up for me! I tested my cable with a multimeter and it turns out it's the MP3-version.

Well, i found out what went wrong. Apearantly i used the wrong cable, i used a audio/video jack -> audio/video cinch, i read somewhere that you need to connect the audio too for it too work but i haven't tested that myself. I switched to using a RPi B instead of a B+ (because it has a normal composi...

Hey, I have a 3.5" NTSC/PAL TFT Display connected to a Raspberry Pi B+, i have the porta pi image (Retropie + Emulationstation) running on it. The thing works on my arcade cabinet which has a 19" LCD display with a DVI output and it works on my LCD tv but not on the small TFT display. I know the pi ...