After loads of time invested, I've discovered that all I needed to to was change eth0 for enxb827ebe3c89b which is the name shown in the ifconfig results. I hope it helps. Also I've modified the interfaces file as follows iface enxb827ebe3c89b inet static address 192.168.0.99 gateway 192.168.0.1 and...

Hello, I've recently wiped my SD card and reinstalled raspbian Jessie on my raspberry pi B+. I have been using my pi with an static IP but now it seems impossible to configure even though I've tried loads of tutorials and even other configurations that worked with other raspberries using jessie. It ...

Thanks a lot!

Hi all, I have a project on my pi that requires a port to be open for sending information. I've implemented some basic security measures to avoid code being executed maliciously and also to check that only the correct messages are processed. However, I've noticed recently that the service listening ...

I´ve bought the card reader and I´ve realised there were some missing files on the boot partition... The pattern on the led blinking helped me to figure that out.

Luckily I had another SD card where I can copy those files from.

Thanks for the help!

Hi,

Thanks for the quick reply! No but I think I can get a reader for a few quid this evening...

Hello, I was using XBMC yesterday when I tried to download some subs. The raspi frozen and I had to reboot pulling out the cable :cry: When it started all leds fired up and I could see the white screen with the raspberry, but after that the PWR led stayed red and the activity one blinking (5 blinks ...

Hi there! I'm experiencing issues lately with my raspberry pi (it's becoming really slow) and I was wondering if I'm asking too much of it :) I have it set up as media center with XBMC and transmission, Samba and I have lately tried out Jasper... Does anybody has a similar configuration running smoo...

Thank you! I´ll try that as soon as I finish installing the files for JAsper. I was trying to make work the record/play test before continuing but I couldn´t do it... I´ll keep you updated. Thanks again! EDIT: After some more research it seems ALSA was missing the soundcard and device to use for rec...

Hello! I´m new to this forums and relatively new to linux and I´m finding some troubles to set up ALSA correctly. I have got the recommend pack to install Jasper but I cannot get a recording done with arecord and then played with aplay. The farther I got was rebooting the Rpi, recording a sample wit...