How is the PSU connected to the Pi? The power supply is 240w 24v . From there, it is converted to 5v through a buck converter. I scoped it and did not see any significant voltage drops. From the buck converter to the micro usb power plug is a 2 inch length of 22awg wire pair. Three may be a power d...

You should add /24 to your ip address You must replace the komma by a dot in the domain_name_servers ip address I had added the /24 after posting, but didn’t see the comma until you pointed it out, but I have this same problem on two different RP3’s and I know the second one does not have that typo...

Actually, I am trying to configure wifi. I don’t have a an Ethernet connection. In that case I WOULD be working with spa-supplicant.conf, right?

Ahhh. I will switch and go stretch then. Just call me the man with the silly putty opinion.

Thank you all.

Are my questions to vague, too difficult, or not appropriate for this forum? I’m pulling my hair out and I don’t know how to get a response.

I need help with some problems I’m having setting up cncjs on my rp3. I just wanted to upload the log file and some screen output They are text. I pasted them to a post (https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=204353#p1268084) but it seems to be a lot to page through and thought it w...

On a new rp3, I have ... Installed noobs rasping. Modified /etc/dhcpcd.conf to set static ip's for both eth0 and wlan0. Pinged both ip's successfully from a Windows pc and Ubuntu. Attached to my local LAN. I can see all the routers in my neighborhood. But I still get the "Aw snap ... " error message...