I have news! It mainly seems to be the (offical) touchscreen I've been using for debugging. Without that I can run it for an hour or so without problems. I still had a hang occur but I'm still investigating if it's the same issue as the speaker reported a disconnection, which it didn't seem to befor...

I'm trying to track down why bluetooth audio stops after a few minutes on the Pi 3b+, which seems to be a hardware issue. I either need to solve this, or find a way to restart bluetooth automatically. It currently requires a reboot to work again. I'm running on a fresh 2018-06-27-raspbian-stretch im...

OK red face here - after some months, a new Pi 3 board and new cable (but same sdcard) these touchscreens are mysteriously back to life... One of the old Pi 2s still doesn't work with them - but I the other one I was testing it with before is fine. Searching for the user error, I think it must be a ...

Just to follow up, it looks like both the screens are indeed dead. We bought some more for another project and they work fine. The dead ones are still appearing via dmesg etc but with no visible screen activity other than a quick flash at boot. I was running two DS18B20 temperature sensors at the ti...

Ah! thanks - wrong URL (we need to set up "Let's Encrypt" for our certificates) http://fo.am/blog/2016/08/10/sonic-kayaks-building/ Also a direct link to the source: https://github.com/sonicbikes/sonic-kayaks and for the Pure Data patches its: https://github.com/sonicbikes/sonic-kayaks-puredata

Hi all, A little project report... they say never mix electronics and sea water, well we're sending Raspberry Pi's to sea on kayaks : https://c5.staticflickr.com/9/8409/29543961292_e0a9c9f690_c.jpg https://c3.staticflickr.com/9/8540/29233315002_d9a8a31103_c.jpg This was a commission for the British ...

I forgot to say that this is on a Pi 2B board.
I just tested this on a different board of the same type and get the same problem. Perhaps I blew both of them up?

Hi all, I have two official pi touchscreens, and they have both stopped working one after the other (a week or so between them) with the same symptoms (just flash on reboot, then black). I'm running them on external power with the ribbon cable. I've tried different cables but I don't think they are ...