Go to advanced search

by Lowkeycoat
Tue Jun 02, 2020 9:15 pm
Forum: Official Foundation Display
Topic: [How To] Two finger touch for right click
Replies: 49
Views: 44724

Re: [How To] Two finger touch for right click

... in "ls -l /dev/twofingtouch " i get ls: cannot access '/dev/twofing': No such file or directory typed in "ls -l /etc/udev/rules.d/70-touchscreen-egalax.rules" got -rw-r--r-- 1 root root 123 Jun 2 21:45 /etc/udev/rules.d/70-touchscreen-egalax.rules and this is my sudo nano /etc/udev/rules.d/70-touchscreen-egalax.rules ...
by Free Spirit
Tue Dec 31, 2019 2:52 pm
Forum: Troubleshooting
Topic: 2018 Touchscreen Calibration
Replies: 4
Views: 4229

Re: 2018 Touchscreen Calibration

Hello, I am trying to get running a touchscreen that is recognized as eGalax TouchScreen. With the above suggestions it didn't quite work. It was only after I used ARM instead of armhf, that it seemed to work. I was suggested to blacklist the driver and when ...
by ND-Expert
Sat Dec 21, 2019 8:31 pm
Forum: Raspberry Pi OS
Topic: touchscreen driver issues
Replies: 0
Views: 140

touchscreen driver issues

... when touching What I did already.. Raspi Model 3+, Raspian 2 different touchscreens available, both failed to function. Both equipped with USB EGALAX hardware. Checked kernel .config file, that touch support is enabled, compiled and install that kernel CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y ...
by Cougar133
Thu Oct 17, 2019 8:59 pm
Forum: Français
Topic: message d'erreur arret/reboot
Replies: 22
Views: 2458

Re: message d'erreur arret/reboot

... Oct 16 21:19:39 VTLD kernel: [ 2.102558] usb 1-1.5: Product: Touch Oct 16 21:19:39 VTLD kernel: [ 2.102566] usb 1-1.5: Manufacturer: eGalax Inc. Oct 16 21:19:39 VTLD kernel: [ 2.128655] input: eGalax Inc. Touch as /devices /platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0EEF:0001.0001/input/in ...
by Robbi_Blechdose
Fri Aug 23, 2019 12:35 pm
Forum: Troubleshooting
Topic: SainSmart 7'' Touch randomly stops working
Replies: 0
Views: 121

SainSmart 7'' Touch randomly stops working

... New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.649869] usb 1-1.5: Product: USB TouchController [ 2.654210] usb 1-1.5: Manufacturer: eGalax Inc. [ 2.656698] fuse init (API version 7.26) [ 2.704633] i2c /dev entries driver [ 3.058810] systemd-udevd[146]: starting version 215 [ 3.789376] ...
by schnee
Fri Aug 23, 2019 12:26 am
Forum: Raspberry Pi OS
Topic: STICKY: Buster bug report thread
Replies: 352
Views: 84616

Re: Buster bug report thread - i2c issue

Hi, after the latest buster update my i2c (and other devices) went missing on my pi. I get an error when i try to load modules: modprobe: ERROR: could not insert 'i2c_dev': Exec format error depmod gives lot of errors on modules sudo depmod depmod: ERROR: failed to load symbols from /lib/modules/4.1...
by schnee
Wed Aug 21, 2019 2:33 pm
Forum: Troubleshooting
Topic: i2c does not work on latest buster image?
Replies: 9
Views: 1769

Re: i2c does not work on latest buster image?

Running depmod results in a lot of errors: sudo depmod depmod: ERROR: failed to load symbols from /lib/modules/4.19.66+/kernel/drivers/input/keyboard/gpio_keys.ko: Exec format error depmod: ERROR: failed to load symbols from /lib/modules/4.19.66+/kernel/drivers/input/keyboard/matrix_keypad.ko: Exec ...
by agupte
Mon Aug 05, 2019 11:57 am
Forum: Troubleshooting
Topic: 2018 Touchscreen Calibration
Replies: 4
Views: 4229

Re: 2018 Touchscreen Calibration

The solution above didn't work for me. If you are using the eGalax product, then follow the below instructions: 1. Download http://www.eeti.com/touch_driver/Linux/20151022/eGTouch_v2.5.5814.L-ma.tar.gz The above link checked and is good as of Sunday, December ...
by NYFireman147
Tue Jul 23, 2019 11:06 am
Forum: Other projects
Topic: Python application for a GUI on RPi for automotive accys
Replies: 0
Views: 305

Python application for a GUI on RPi for automotive accys

... fan on case(possibly upgrading to a 4B 4gb, and using the 3b just to host the relay controller) 12vdc to 5vdc 5amp converter USB sound card 7in eGalax touchscreen (VGA/DVI, which one input will be pi, the other a rearview trailer hitch/dashcam camera, which for the life of me can not get the ...
by tjcooperforted
Fri Feb 22, 2019 8:26 am
Forum: Beginners
Topic: where does OS find touchscreen device name?
Replies: 1
Views: 518

where does OS find touchscreen device name?

... name of a touchscreen device? I have included all the usual files for a touchscreen: /var/log/Xorg.0.log xinput /etc/udev/rules.d/70-touchscreen-egalax.rules /usr/share/X11/xorg.conf.d/40-libinput.conf and 45-evdev.conf /boot/config.txt Let me know if you need to see any other files. Much thanks., ...
by PoldiMUC
Tue Feb 12, 2019 8:11 pm
Forum: Troubleshooting
Topic: Touble with touchscreen calibration
Replies: 0
Views: 229

Touble with touchscreen calibration

... Pi3. Additionally I bought a resestive touch panel which is connected to the Raspberry via USB. IMG_030.jpg The touch controller is recognized as "eGalax Inc. USB TouchController" and accepts inputs via the tochscreen. The mouse pointer moves when I stroke the tochscreen with my finger. Unfortunately ...
by Geoffr98
Fri Nov 09, 2018 2:34 pm
Forum: General discussion
Topic: Faytech 10" Capacitive Touch not working
Replies: 5
Views: 686

Re: Faytech 10" Capacitive Touch not working

... faytech and along with support from somone else got it going. I in case others need it in the future, here is what I what I have done to get the Egalax touch screen (Faytech) working: Install the Egalax driver available from EETI website: sudo apt-get install xserver-xorg-input-evdev Then change ...
by Backup
Thu Nov 08, 2018 11:24 pm
Forum: Troubleshooting
Topic: [SOLVED] TOUCHSCREEN 5' problem and RPi reboot error
Replies: 0
Views: 243

[SOLVED] TOUCHSCREEN 5' problem and RPi reboot error

... with the pen . Done,it will present to you a window with numbers: copy this part Section "InputClass" Identifier "calibration" MatchProduct "eGalax Inc. USB TouchController" Option "Calibration" "1960 248 151 1783" EndSection Go to, sudo nano /ect/X11/xorg.conf.d/99-calibration.conf and paste ...
by Backup
Thu Nov 08, 2018 11:03 pm
Forum: Italiano
Topic: [RISOLTO] Problema TOUCHSCREEN Schermo 5" e RIAVVIO RPI,
Replies: 5
Views: 3421

[RISOLTO] Problema TOUCHSCREEN Schermo 5" e RIAVVIO RPI,

... dovrete fare sarà copiare la parte compresa tra "Section Inputclass" ed "Endclass" . Section "InputClass" Identifier "calibration" MatchProduct "eGalax Inc. USB TouchController" Option "Calibration" "1960 248 151 1783" EndSection Ora, sudo nano /ect/X11/xorg.conf.d/99-calibration.conf e copiate ...
by Geoffr98
Thu Nov 08, 2018 2:15 pm
Forum: General discussion
Topic: Faytech 10" Capacitive Touch not working
Replies: 5
Views: 686

Faytech 10" Capacitive Touch not working

... /dev/input/event1: USB Keyboard /dev/input/event2: HP HP Link-5 micro dongle /dev/input/event3: HP HP Link-5 micro dongle /dev/input/event4: eGalax Inc. USB TouchController Pen /dev/input/event5: eGalax Inc. USB TouchController Select the device event number [0-5]: here is what my 52-egalax-virtual.conf ...
by transientsky
Wed Sep 26, 2018 1:10 pm
Forum: Off topic discussion
Topic: Planar PT19 Touch Screen
Replies: 0
Views: 1828

Planar PT19 Touch Screen

... VGA and the touch is through USB. When I run the lsusb command I do get the following Bus 001 Device 005: ID 0eef:001 D-WAV Scientific Co., Ltd eGalax TouchScreen I was able to find a Linux driver for this device here http://www.planar.com/support/drivers-software/touch-screen/ I am wondering ...
by DirkS
Wed Aug 29, 2018 3:08 pm
Forum: Raspberry Pi OS
Topic: Drivers for 7 inch waveshare touc screen?
Replies: 5
Views: 2012

Re: Drivers for 7 inch waveshare touc screen?

fruitoftheloom wrote:
Wed Aug 29, 2018 2:43 pm
Stupid question but did you plug in the USB Cable required for Touch ??
Must be; the device is visible:

Code: Select all

Bus 001 Device 004: ID 0eef:0005 D-WAV Scientific Co., Ltd
That's basically an eGalax panel.
I have not checked it, but I'm pretty sure this device is supported by default in Raspbian.
by Piefurz
Mon Aug 06, 2018 11:34 pm
Forum: Troubleshooting
Topic: Elo Touchscreen
Replies: 6
Views: 13150

Re: Elo Touchscreen

... Name" --type=float "Coordinate Transformation Matrix" 0 -1 1 1 0 0 0 0 1 Section "InputClass" Identifier "RotateTouchCW" MatchProduct "eGalax Inc. USB TouchController" Option "TransformationMatrix" "0 1 0 -1 0 1 0 0 1" EndSection
by medic3447
Mon Aug 06, 2018 5:26 pm
Forum: Troubleshooting
Topic: Installing eGalax TouchScreen help
Replies: 0
Views: 489

Installing eGalax TouchScreen help

... ect..) I have tried to correct this using xinput_calibrator with an output of... Section "InputClass" Identifier "calibration" MatchProduct "eGalax Inc. USB TouchController" Option "MinX" "23728" Option "MaxX" "23856" Option "MinY" "44195" Option "MaxY" "43569 Option "SwapXY" "1" Option "invertX" ...
by gnumoksha
Mon Jul 23, 2018 12:22 am
Forum: Beginners
Topic: xinput-calibrator
Replies: 29
Views: 75820

Re: xinput-calibrator

... Raspbian 9 running on Raspberry Pi 3 model B+ Thank you @n1ks! Sorry if this is duplicated, I have tried to get help with this. I also am using an eGalax based touch screen with Jessie. This worked perfectly with Wheezy but will not work with Jessie. The monitor is a Lilliput 10 inch resistive ...
by mrdjnash
Sat Jul 14, 2018 10:27 pm
Forum: Graphics, sound and multimedia
Topic: Installing the eGalax TouchScreen help
Replies: 4
Views: 3677

Re: Installing the eGalax TouchScreen help

Can you paste a link to the Stack Overflow answer as I'm having the same problem.
by mamer999
Wed Jul 04, 2018 5:39 pm
Forum: Graphics, sound and multimedia
Topic: fruitbox MP3 jukebox
Replies: 1544
Views: 314550

Re: fruitbox MP3 jukebox

... has a resolution of 1280 x 800. Touch resolution is 0 0, 2047 2047. In fruitbox.btn after calibration with --calibrate-touch: TouchDevice = eGalax TouchMin = 45 113 TouchMax = 1950 1909 Cheers Jürgen
by BrianO
Wed Jun 20, 2018 2:37 pm
Forum: Troubleshooting
Topic: eGTouch not working (mouse moves to top left hand corner)
Replies: 1
Views: 450

eGTouch not working (mouse moves to top left hand corner)

Hi, My eGalax USB Touch screen registers taps, but the mouse will not calibrate. It is stuck at (X=0, Y=0), when I touch the screen the mouse shoots up into the top left hand corner. I have rebuilt the kernel, installed the driver ...
by robiv8
Mon Jun 11, 2018 10:07 pm
Forum: Official Foundation Display
Topic: [How To] Two finger touch for right click
Replies: 49
Views: 44724

Re: [How To] Two finger touch for right click

... --debug twofing, the two-fingered daemon Version 0.1.2.20120708 /dev/twofingtouch: No such file or directory My /etc/udev/rules.d/70-touchscreen-egalax.rules: KERNEL=="event*",ATTRS{name}=="eGalaxTouch Virtual Device for Multi",SYMLINK+="twofingtouch",RUN+="/bin/chmod a+r /dev/twofingtouch" KERNEL=="event*",ATTRS{name}=="FT5406 ...
by carlo.antinarella
Wed May 09, 2018 10:02 am
Forum: Troubleshooting
Topic: eGalax Touchscreen not working properly on CM3 with Raspbian + Linux 4.14
Replies: 1
Views: 2137

Re: eGalax Touchscreen not working properly on CM3 with Raspbian + Linux 4.14

... In Device Drivers > HID support > Special HID drivers: < > HID Multitouch panels In Device Drivers > Input device support > Touchscreens: < > EETI eGalax multi-touch panel support <*> USB Touchscreen Driver [*] eGalax, eTurboTouch CT-410/510/700 device support [*] GeneralTouch Touchscreen device ...

Go to advanced search