Go to advanced search

by geneworld
Tue Oct 03, 2017 7:08 pm
Forum: Troubleshooting
Topic: issue mounting usb drive
Replies: 4
Views: 692

Re: issue mounting usb drive

After some reading I've added

Code: Select all

max_usb_current=1
in

Code: Select all

/boot/config.txt
and it seemed to do the trick when I reboot the Pi.

However, If i then unmount it and try to mount it again i run into the same issues. :?:
by geneworld
Tue Oct 03, 2017 6:57 pm
Forum: Troubleshooting
Topic: issue mounting usb drive
Replies: 4
Views: 692

Re: issue mounting usb drive

Does the mount show up with mount Here is what I get when I type mount [email protected]:~ $ mount /dev/mmcblk0p2 on / type ext4 (rw,noatime,data=ordered) devtmpfs on /dev type devtmpfs (rw,relatime,size=217964k,nr_inodes=54491,mode=755) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /pr...
by geneworld
Tue Oct 03, 2017 12:28 pm
Forum: Troubleshooting
Topic: issue mounting usb drive
Replies: 4
Views: 692

issue mounting usb drive

Hey Guys, I'm running into an issue which it rattling my brain. I have one of my Pi ZeroW running the 08-16-17 raspbian stretch image. my /etc/fstab looks like proc /proc proc defaults 0 0 PARTUUID=4a6c32b1-01 /boot vfat defaults 0 2 PARTUUID=4a6c32b1-02 / ext4 defaults,noatime 0 1 UUID=ECAADEE5AADE...
by geneworld
Thu Sep 28, 2017 5:58 pm
Forum: Advanced users
Topic: Choose boot location based on jumper cable?
Replies: 2
Views: 677

Re: Choose boot location based on jumper cable?

https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/bootflow.md Thanks for that link! It looks like what i want to do is possible but the documentation doesn't seem to show the steps needed so I'll have to look into it further i guess. Has anyone been able to do this and can he...
by geneworld
Thu Sep 28, 2017 2:43 pm
Forum: Advanced users
Topic: Choose boot location based on jumper cable?
Replies: 2
Views: 677

Choose boot location based on jumper cable?

Hey Guys I've had a thought and I wanted to see if anyone has any input on it. I currently have my pi booting from a USB drive with only the /boot directory on the card. My thought was what if I kept all the directories on the SD card also and have something set up in /boot/cmdline.txt where if a ce...
by geneworld
Wed Oct 26, 2016 2:02 pm
Forum: Troubleshooting
Topic: .javaxxx using all my CPU
Replies: 2
Views: 1493

Re: .javaxxx using all my CPU

I was careless you're right. Well Lesson learned the hard way. Luckily I didn't get too deep into programming with this sd card!
by geneworld
Wed Oct 26, 2016 12:19 pm
Forum: Troubleshooting
Topic: .javaxxx using all my CPU
Replies: 2
Views: 1493

.javaxxx using all my CPU

Hey guys, Sorry if this isn't in the right spot, I wasn't sure where to put my question. I recently made a fresh install of Rasbian Jessie with Pixel (2016-09-23-raspian-jessie.img) on one of my Pi Zeros and I have been using it mainly to test new programs before loading them on my other builds. I a...
by geneworld
Mon May 30, 2016 6:47 am
Forum: Advanced users
Topic: PiZero usb internet gadget from another pi
Replies: 3
Views: 1180

Re: PiZero usb internet gadget from another pi

Great I'll give it a try! Thanks!
by geneworld
Sun May 29, 2016 8:25 pm
Forum: Advanced users
Topic: PiZero usb internet gadget from another pi
Replies: 3
Views: 1180

PiZero usb internet gadget from another pi

Hey guys I've come across a question that i haven't been able to find a solution for. I have one of my Pi Zero's set up as a usb gadget connected to my Pi 3 through ssh. I've seen posts on how to enable internet through the host computer via both windows and mac but i haven't yet been able to figure...
by geneworld
Mon May 09, 2016 11:48 am
Forum: Advanced users
Topic: change usbmound default user
Replies: 2
Views: 467

Re: change usbmound default user

bump ;)
by geneworld
Thu May 05, 2016 11:17 am
Forum: Advanced users
Topic: change usbmound default user
Replies: 2
Views: 467

Re: change usbmound default user

Bump!

I also tried

Code: Select all

FS_MOUNTOPTIONS="uid=1000,gid=1000"
and it didn't work :(
by geneworld
Tue May 03, 2016 2:56 pm
Forum: Networking and servers
Topic: Mounting a SD card from a wifi printer
Replies: 5
Views: 1222

Re: Mounting a SD card from a wifi printer

Awesome! that worked like a charm! I ended up doing

Code: Select all

sudo mount -t cifs //EPSON357F8A/MEMORYCARD /home/pi/test -o guest,sec=ntlm,uid=1000,gid=1000
and I was able to see it and have it's right to

Code: Select all

pi pi
Thanks so much :D

and to unmounts the drive I do

Code: Select all

sudo umount  //EPSON357F8A/MEMORYCARD
by geneworld
Tue May 03, 2016 2:00 pm
Forum: Networking and servers
Topic: Mounting a SD card from a wifi printer
Replies: 5
Views: 1222

Mounting a SD card from a wifi printer

Hey guys I've been working on an issue and I was wondering if you'd be able to help. I have an Epson 357 printer and it has a SD card slot. When I insert a SD card Windows auto recognizes it so I can access the files that I've scanned in. I want to be able to do this with my raspberry pi but so far ...
by geneworld
Tue May 03, 2016 11:52 am
Forum: Advanced users
Topic: change usbmound default user
Replies: 2
Views: 467

change usbmound default user

Hey guys I've been working on this for a little while and I was wondering if anyone else knew of a solution. I've installed usbmount and whenever I plug something in the rights go to root root I'd love to get a way to make it so that it is pi pi so that whenever I boot into the gui I can edit files ...
by geneworld
Wed Jul 22, 2015 12:29 pm
Forum: Beginners
Topic: Keeping power plugged in while off
Replies: 2
Views: 1158

Re: Keeping power plugged in while off

Great! Thanks for the helpful response rpdom :mrgreen:
by geneworld
Wed Jul 22, 2015 12:22 pm
Forum: Beginners
Topic: Keeping power plugged in while off
Replies: 2
Views: 1158

Keeping power plugged in while off

Hey guys I had a thought and wanted to see if it was safe for the Pi's or not. I have a few Pi's and they have two holes labeled "Run" near the display port. from what I've read that basically restarts the Pi. What I was wondering is if it was safe for the Pi to shut down, keep the power plugged in,...
by geneworld
Mon May 11, 2015 5:33 pm
Forum: Beginners
Topic: Just got a RP2 question about overclocking?
Replies: 4
Views: 1024

Re: Just got a RP2 question about overclocking?

Oh alright i think i understand a little better thanks!...I'll have to mess around with these to see what they do with the config.txt file.

I plan on having this run 24/7 and just wanted to make sure that i wasn't going to be overclocking it causing it to overheat or hang up.
:D
by geneworld
Mon May 11, 2015 3:08 pm
Forum: Beginners
Topic: Just got a RP2 question about overclocking?
Replies: 4
Views: 1024

Just got a RP2 question about overclocking?

Hey guys I've run into a question when it comes to the overclocking options when it comes to the new Raspberry Pi 2. I've looked online and haven't found a definitive answer yet! I just picked up a Model 2 and when i went to the overclocking settings i found that that the default "None" setting is t...
by geneworld
Sat Aug 02, 2014 8:25 pm
Forum: Gaming
Topic: RetroPie information in Terminal
Replies: 2
Views: 810

Re: RetroPie information in Terminal

That's where it was thanks! I don't know why I didn't think to check there first. :oops:
by geneworld
Sat Aug 02, 2014 3:29 am
Forum: Gaming
Topic: RetroPie information in Terminal
Replies: 2
Views: 810

RetroPie information in Terminal

Hey guys I recently reinstalled RetroPie and when I load up the terminal I get all the following information: http://i65.photobucket.com/albums/h237/geneworld/af2e08aa082f961ac40d8bdcc84872f1.jpg I built this image from the github not the image if that makes any difference. I was womdering if there ...
by geneworld
Wed May 07, 2014 8:42 pm
Forum: Gaming
Topic: EmulationStation menu question
Replies: 1
Views: 689

EmulationStation menu question

Hey guys I have a program that I'd like to run when I select to shut down the Pi through EmulationStation and I had a thought about how to do it but need some help. Does anyone know if you can edit the menu for EmulationStation so that I can add a line of code before it runs the shutdown sequence? F...
by geneworld
Wed May 07, 2014 8:38 pm
Forum: Beginners
Topic: Shut down script location?
Replies: 21
Views: 5601

Re: Shut down script location?

I'll have a look at that program thanks :)
by geneworld
Wed May 07, 2014 3:18 pm
Forum: Beginners
Topic: Shut down script location?
Replies: 21
Views: 5601

Re: Shut down script location?

All of that sounds good the only thing is I'm relatively new to Linux so a lot of this I'm not sure about and will have to look up :) It if makes it any easier the only commands I'd be using are sudo halt and sudo reboot so I'm not sure if I have to worry about the different run levels of the -f fla...
by geneworld
Wed May 07, 2014 2:31 pm
Forum: Beginners
Topic: Shut down script location?
Replies: 21
Views: 5601

Re: Shut down script location?

I want to write some data to a file when I perform a reboot or shutdown. I have the program written already but I wasn't sure what I can edit so that when I type

Code: Select all

sudo halt or sudo reboot
it will run those programs too.

Are those safe to edit?

Go to advanced search