Is it reliable? Does it happen every time? If so then I could do with getting hold of your Pi and SD card for testing at Pi Towers to understand the problem (we've not actually seen this issue back at base!) Yes, no problems so far! I have tested several times with 2013-09-25-wheezy-raspbian and it...

I have the same problem with 2013-12-20-wheezy-raspbian.img: Mounting local filesystems...[...] mmc0:Timeout waiting for hardware interrupt - cmd12.. [...] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xf00 But with 2013-09-25-wheezy-raspbian.img my system works...

Thanks for your answers! I found instructions on how to enable the camera without using raspi-config, but I still had the reboot problem. Then I attached a video capture device to the RCA video output so that I could see what was happening. Reboot failed on error messages: mmc0: Timeout waiting for ...

I booted my RPi with 2013-12-20-wheezy-raspbian.img, connected to it via Ethernet with ssh and executed "sudo raspi-config". I set my locale and enabled camera in raspi-config. After that I rebooted but I can't ssh into my RPi any more! It does not respond to ping and ssh gives error message "No rou...