Go to advanced search

by PiUser10
Sat Jul 06, 2019 2:38 pm
Forum: Advanced users
Topic: [PI4:] how do I move the filesystem to a USB stick/Drive
Replies: 33
Views: 2060

Re: [PI4:] how do I move the filesystem to a USB stick/Drive

Just received delivery of a UGreen m.2 Portable enclosure and a WD Blue M.2 250 GB SSD. Set it up and moved the / content over (as per previous instructions) and adjusted the cmdline.txt (used PARTUUID= not /dev/sda1) Re-booted PI4 and it is all good now very fast and no more excessive writes on the...
by PiUser10
Thu Jul 04, 2019 9:52 pm
Forum: Advanced users
Topic: [PI4:] how do I move the filesystem to a USB stick/Drive
Replies: 33
Views: 2060

Re: [PI4:] how do I move the filesystem to a USB stick/Drive

Well a quick update ....... After running with / on USB 3.0 device for an hour or so it was much less responsive than the SDCard ! Sower to boot and slower to open programs like Chromium and Thunderbird. This is either my drive throughput or an issue with the USB 3.0 throughput (I hope it is not the...
by PiUser10
Thu Jul 04, 2019 8:33 pm
Forum: Advanced users
Topic: [PI4:] how do I move the filesystem to a USB stick/Drive
Replies: 33
Views: 2060

Re: [PI4:] how do I move the filesystem to a USB stick/Drive

I have just followed the instructions at https://www.tomshardware.co.uk/boot-raspberry-pi-from-usb,news-61081.html and it worked ok for me. When I booted first time it took a while and flashed a few messages about /dev/sda2 (where I put /) then proceeded to display the desktop. I now have /boot runn...
by PiUser10
Mon Jul 01, 2019 5:00 pm
Forum: General discussion
Topic: Cheap but effective PI 4 heat sink
Replies: 22
Views: 3081

Re: Cheap but effective PI 4 heat sink

Post a picture! I suppose if you were made of money you could take two more pennies, cut them in half and place them vertically along the top of the current heat sink to increase the surface area. OK as requested here is the picture, I have cut down to 10 coins and still getting good results, coin ...
by PiUser10
Mon Jul 01, 2019 2:52 pm
Forum: General discussion
Topic: Cheap but effective PI 4 heat sink
Replies: 22
Views: 3081

Re: Cheap but effective PI 4 heat sink

There was a thread here long about about using pound coins for a heat sink! Your suggestion is obviously more thrifty. Yes I picked 2 Pence coins for the heat transfer copper content (as well as cheaper) , looks a bit naff and will not really fit in a case but hey you can't have everything. Guess y...
by PiUser10
Mon Jul 01, 2019 2:23 pm
Forum: General discussion
Topic: Cheap but effective PI 4 heat sink
Replies: 22
Views: 3081

Cheap but effective PI 4 heat sink

Wanted to cool my new PI 4 a little but without the noise from a fan. Stacked and taped 20 X 2 pence coins together but a dab of MX-4 thermal paste on SOC and applied the makeshift heat sink. Noticeable drop in temperature, now idles below 57 C and when loaded stays below 74 C (stock frequencies and...
by PiUser10
Thu Oct 01, 2015 3:24 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: RTC DS1307 Read Error
Replies: 3
Views: 2205

Re: RTC DS1307 Read Error

Check out this thread viewtopic.php?p=692662#p692662
for a possible fix, had the same issue earlier today but after working through the above all is working fine now.
Hope it also solves your problem.
by PiUser10
Sat Sep 19, 2015 3:12 pm
Forum: Troubleshooting
Topic: Purchased codecs not enabling
Replies: 11
Views: 1230

Re: Purchased codecs not enabling

In berryboot initial menu screen where you select OS to boot press the >> symbol in top menu right hand side. A new menu will then display under the initial one, use config option from this and you will see a new screen which has a set of tabs, the second one will allow you to edit config.txt and ad...
by PiUser10
Sat Sep 12, 2015 7:12 pm
Forum: Troubleshooting
Topic: How to use official 7" display and HDMI
Replies: 3
Views: 1656

Re: How to use official 7" display and HDMI

Thanks for the pointer I can see how this may work. I was hoping that maybe X could be made to use the 2 displays and either clone the output or extend the desktop but it looks a present as if this is something for the future if at all. I am sure with such an active pi audience something will maybe ...
by PiUser10
Sat Sep 12, 2015 6:18 pm
Forum: Troubleshooting
Topic: How to use official 7" display and HDMI
Replies: 3
Views: 1656

How to use official 7" display and HDMI

Hi, looking for any help in getting the new 7" Pi display and the HDMI port to run at the same time. I have a Pi 2 running Raspbian and the new official 7" screen works a treat. I thought I may be able to also use the HDMI connection at the same time (many reviews say this is possible) but upon conn...
by PiUser10
Sat Sep 12, 2015 2:59 pm
Forum: Troubleshooting
Topic: Official Pi Touchscreen Unable to Properly Power Pi
Replies: 21
Views: 8138

Re: Official Pi Touchscreen Unable to Properly Power Pi

I to have been having a number of issues with power from the touch screen to the Pi 2. I have tried both USB cable and GPIO jumper wires but both have the same issue. Numerous rainbow icons when using the desktop, I have moved all USB devices to a powered hub but this has had no effect on the issue....

Go to advanced search